It looks like you simply need to close the process that's using the serial port.
If you don't know how to do this, and this is a desktop, you can simply reboot it. On Jan 12, 2011, at 1:36 PM, jin&hitman&Barracuda wrote: Hi Thanks for answer. Here is the command results
fatality@squeeze:~$ dmesg | grep ttyS [ 0.480071] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.480323] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
sudo su root@squeeze:/home/fatality# cu -l /dev/ttyS0 -s 9600 cu: open (/dev/ttyS0): Permission denied cu: /dev/ttyS0: Line in use
root@squeeze:/home/fatality# cu -l /dev/ttyS1 -s 9600 cu: open (/dev/ttyS1): Permission denied cu: /dev/ttyS1: Line in use
root@squeeze:/home/fatality# id fatality
uid=1000(fatality) gid=1000(fatality) groups=1000(fatality),4(adm),20(dialout),21(fax),24(cdrom),25(floppy),26(tape),29(audio),30(dip),44(video),46(plugdev),105(fuse),107(powerdev),110(netdev),116(lpadmin),117(vboxusers),123(scanner)
Same command results with non-root user fatality@squeeze:~$ cu -l /dev/ttyS0 -s 9600 -d
cu: open (/dev/ttyS0): Permission denied
cu: /dev/ttyS0: Line in use
Some extra info: root@squeeze:/home/fatality# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:0 rx:0
1: uart:unknown port:000002F8 irq:3 2: uart:unknown port:000003E8 irq:4 3: uart:unknown port:000002E8 irq:3
Thanks again
2011/1/12 Luis Mondesi <lemsx1@gmail.com>
1. are you a member of the group that owns your serial port (/dev/ttyS0 or ttyS1?)
2. what if you use "cu" like: cu -l /dev/ttyS0 -s 9600 3. what did your kernel think is the ttyS* port? (grep ttyS /var/log/dmesg)
It's possible that your udev rules are messed up somehow and you don't have the right special files. Verify everything first.
On Jan 12, 2011, at 2:56 AM, jin&hitman&Barracuda wrote: Hi .
I was working on my Cisco Router with serial port for
configure the IOS. I can see the terminal results on the screen but i
can not send any signal or character with keyboard on Minicom 2.4. I'm
still using the same cable on other os (RedHat, OpenBSD, win...) and it
is working. I sent some order, character and signal same cable. There
is a status bar on the minicom and allways writing "Offline" marked
with red color.
After some hours, i changed my mind, now i'm using cutecom. But it doesn't work. every thing still same it was.
Please, Can anyone tell me what is problem/s? I'm using Squueze. Have nice day.
Thanks, Fatih --
-- From HemiB A R R A C U D A !
-- From HemiB A R R A C U D A !
|