Re: 有关etch的GUI安装模式？
的确和gui没什么关系。
我这里一台amd主机安装的etch，别的还好，就是最初网卡识别不了mac地址，每次
启动都会自动重新分配一个mac地址和eth*的网卡编号，于是修改了udev的配置文件
/etc/udev/rules.d/z25_persistent-net.rules
为：
SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:00:6c:e9:68:d0",
NAME="eth0"
就好了
环境：
AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
lspci:
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio
(rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation Unknown device
03d2 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Ming Hua 写道:
> 我并没有怎么用过图形界面的安装程序，但从我对 d-i 的了解，我认为：
>
> On Tue, May 29, 2007 at 04:50:42PM +0800, Vern Sun wrote:
>> etch安装程序(GUI)在使用PCI-E显卡的情况下是否存在异常？
>
> 相比 PCI-E 这种接口而言，显卡芯片的型号可能是更重要的因素。
>
>> etch安装程序(GUI)能否识别到你的USB/STAT1/STAT2硬盘？
>> etch安装程序(GUI)能否从你的USB/STAT1/STAT2光驱顺利启动？
>> etch安装程序(GUI)在使用64位CPU的情况下是否存在异常？
>
> 这三项都和 GUI 没有什么太大关系，字符界面的安装程序做得到的，图形界面的
> 安装程序也做得到。具体情况恐怕还是要看主板等硬件的具体型号。
>
> Ming
> 2007.05.29
>
>
Reply to: