Re: [cle-devel] 如何将pcf字型转回bdf字型？
On Wed, 1 Nov 2000, Chih-Wei Huang wrote:
> Jonathan Chang 写道：
> > > fstobdf -s "unix/:-1" -fn taipei16
> >
> > 谢谢，但是我执行的结果是(xlsfonts里确定有taipei16)：
> > $ fstobdf -s "unix/:-1" -fn taipei16
> > _FSTransSocketUNIXConnect: Can't connect: errno = 111
> > can't open font server "unix/:-1"
> >
> > BTW，我想用这招转出文鼎的明体：
> > $ fstobdf -s "unix/:7100" -fn \
> > -default-ming-medium-r-normal--24-240-72-72-c-240-big5-0 >default-ming.bdf
>
> 你的 xfs server 究竟是 bind UNIX port -1
> or TCP port 7100?
> 若为前者的话才用 "unix/:-1",
> 若是后者应用 "tcp/:7100"
>
> RH(CLE) default 是用 UNIX port.
> Debian 的话我就不晓得了...
> 看看你的 /etc/X11/fs/config 怎么设的吧...
>
我看了/etc/X11/xfs/config (see attached) 里面倒是没有记载port number，
只有一行
no-listen = tcp
我采用"unix/:7100"的原因是Debian取用文鼎ttf字型都得要加入"unix/:7100"
这个fontpath来向xfs-xtt取字型。
对这个xfs我还是很外行啦! 大家有一些经验的就多教教我吧!
Jonathan
--
| This message was re-posted from debian-chinese-big5@lists.debian.org
| and converted from big5 to gb2312 by an automatic gateway.
# /etc/X11/xfs/config
#
# X font server configuration file
# allow a maximum of 10 clients to connect to this font server
client-limit = 10
# when a font server reaches its limit, start up a new one
clone-self = on
# log errors using syslog
use-syslog = on
# turn off TCP port listening (Unix domain connections are still permitted)
no-listen = tcp
# paths to search for fonts
catalogue = /usr/lib/X11/fonts/misc/,/usr/lib/X11/fonts/cyrillic/,/usr/lib/X11/fonts/Speedo/,/usr/lib/X11/fonts/Type1/,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/TrueType/
# in decipoints
default-point-size = 120
# x1,y1,x2,y2,...
default-resolutions = 75,75,100,100
deferglyphs = all
# font cache control, specified in KB
cache-hi-mark = 2048
cache-low-mark = 1433
--
| This message was re-posted from debian-chinese-big5@lists.debian.org
| and converted from big5 to gb2312 by an automatic gateway.
Reply to: