[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Please check release-notes.sgml.02(GB)



各位好!
拜托校對一下。

Wen

##################################################################
 <sect id="newinst">安裝系統有何新內容?

  <p><package>boot-floppies</package>包和<package/debian-cd/包在 Debian 2.1
  的基礎上做了一些改進。在通過網絡安裝支持方面有明顯的改進,包括 DHCP 配置
  支持。更多的體系結構支持串行控制台。

  <p>舊的配置文件和任務選擇系統被 Debian 的"meta包"(僅僅是提供與其它包依賴
  關系的包)和稱作<package/tasksel/的包的界面所代替。這意味著不僅在安裝時可
  使用這些任務,任何時候都可使用它們,升級時也可保留。

  <p>過去被一組 shell 腳本來完成的再啟動後配置,現在被使用<package/debconf/
  的<package/base-config/ 包所代替。可以預料在下一個 Debian 發行版本
  <package/debconf/ 將成為安裝和配置的與用戶的主要界面。

<![ %i386 [
  <p>內核映象可以從各種“味道”的內核中得到。它們支持各組不同硬件的組合。
  對于&arch-title;的體系結構,這些內核可以在&debian; &release;中得到。

  <taglist>
  <tag>`vanilla'
    <item>Debian 中的標準內核包。它通過 Linux 建立的模塊包括幾乎所有的硬件
    支持。它包括了網卡、SCSI板、聲卡、Video4Linux板等驅動程序。`vanilla'
    內核包括一個急救、一個根和三個驅動程序盤。

  <tag>`udma66'
    <item>它除包含 Andre Hedrick 的 IDE 補丁以支持 UDMA66 設備外,與`vanilla'
    非常類似。

  <tag>`compact'
    <item>除去掉了許多不常用的設備(如聲卡、v41等)驅動程序外,與`vanilla'類似。
    另外它支持幾個常用的 PCI 網卡 -- NE2000、3COM 3c905、Tulip、Via-Rhine 和
    Intel EtherExpress Pro100。這些內部驅動程序使你可以充分利用 Debian 的網絡
    安裝特點來通過網絡安裝驅動程序和基本系統,以至僅需要制作根和急救盤。
    `compact' 還支持幾個通用的 RAID 控制器: DAC960 和 Compaq's SMART2 RAID 
    控制器。`compact'內核包括一個急救、一個根和一個驅動程序盤。

  <tag>`idepci'
    <item>只支持 IDE 和 PCI 設備(和極少數的 ISA 設備)的內核。這個內核只有當
    其它內核中的 SCSI 板在啟動時引起系統掛斷(可能是由于系統中矛盾的配置,
    或者是驅動程序的錯誤行為造成的)使使用。`idepci'內核還有一個內部的 IDE 
    軟盤驅動程序使你能從 LS120 或 ZIP 設備安裝。
  </taglist>

  這些內核的核配置文件可以在它們各自的目錄下的名為"kernel-config"的文件中
  找到。
]]>

###################################### 原文
 <sect id="newinst">What's New in the Installation System?

  <p>The <package>boot-floppies</package> and the <package/debian-cd/
  packages include a number of improvements over Debian 2.1. There have been
  notable improvements in network installation support, including DHCP
  configuration support. More architectures support serial console
  installation.

  <p>The old profiles and tasks selection system has been replaced by Debian
  "meta-packages" (packages whose only purpose is to depend on other
  packages) and an interface called <package/tasksel/.  This means that
  tasks can be used at any time, not just installation time, and can be
  retained across upgrades.

  <p>Post-reboot configuration, which used to be performed by a batch of
  shell scripts, are now performed by the <package/base-config/ package,
  which uses <package/debconf/.  It is expected that for the next major
  Debian release, <package/debconf/ will be the main interface users
  interact with during installation and configuration.

<![ %i386 [
  <p>Kernel images are available in various "flavors". These flavors each
  support a different set of hardware. The flavors available in &debian;
  &release; for &arch-title; are:

  <taglist>
  <tag>`vanilla'
    <item>The standard kernel package available in Debian. This includes
    almost all drivers supported by Linux built as modules. This includes
    drivers for network devices, SCSI devices, sound cards, Video4Linux
    devices, etc. The `vanilla' flavor includes one rescue, one root and
    three driver disks.

  <tag>`udma66'
    <item>Very similar to `vanilla', except it includes Andre Hedrick's
    IDE patches to support UDMA66 devices.

  <tag>`compact'
    <item>Like `vanilla', but with many of the less-frequently-use drivers
    removed (sound, v4l, etc). In addition, it has built in support for
    several popular PCI ethernet devices -- NE2000, 3COM 3c905, Tulip,
    Via-Rhine and Intel EtherExpress Pro100. These built in drivers allow
    you to take full advantage of the Debian installer's net install feature
    to install the driver and/or base system over the network so that only
    the root and rescue disks need to be made. Finally, `compact' also
    supports several common RAID controllers: DAC960, and Compaq's SMART2
    RAID controllers. The `compact' flavor includes one rescue, one root and
    one driver disks.

  <tag>`idepci'
    <item>Kernel that supports only IDE and PCI devices (and a very small
    number of ISA devices). This kernel should be used if the SCSI drivers
    in the other flavors cause your system to hang on startup (probably
    because of resource conflicts, or a misbehaving driver/card in your
    system). The `idepci' flavor also has a built-in ide-floppy driver so
    that you can install from LS120 or ZIP devices.
  </taglist>

  The kernel config files for these flavors can be found in their respective
  directories in a file named "kernel-config".
]]>

-- 
| This message was re-posted from debian-chinese-gb@lists.debian.org
| and converted from gb2312 to big5 by an automatic gateway.



Reply to: