[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

release-notes.sgml.02 場苺

####### 翻譯

 <sect id="newinst">安裝系統有何新內容?

  <p><package>boot-floppies</package>包和<package/debian-cd/包在 Debian 2.1
  DHCP 進行網絡配置。更多的體系結構支持通過串行控制台進行安裝。

  <p>舊的工作環境和任務選擇系統被 Debian 的“超級包”(它的唯一內容就是聲明它

  <p>過去被一組 shell 腳本來完成的再啟動後配置,現在被使用<package/debconf/
  的<package/base-config/ 包所代替。可以預期在下一個 Debian 發行版本中,
  <package/debconf/ 將成為安裝和配置時與用戶交流的主要界面。

<![ %i386 [
  對于&arch-title;的體系結構,這些內核可以在&debian; &release;中得到:

    <item>Debian 中的標準內核包。它包括了幾乎所有的 Linux 所支持的硬件的驅動

    <item>它除包含 Andre Hedrick 的 IDE 補丁以支持 UDMA66 設備外,與`vanilla'

    另外它內建支持幾個常用的 PCI 網卡 -- NE2000、3COM 3c905、Tulip、Via-Rhine 
    和Intel EtherExpress Pro100。這些內建驅動程序使你可以充分利用 Debian 的
    盤和急救盤。`compact' 還支持幾個通用的 RAID 控制器:DAC960 和 Compaq's 
    SMART2 RAID 控制器。`compact'內核包括一個急救盤、一個根文件系統盤和一

    <item>只支持 IDE 和 PCI 設備(和極少數的 ISA 設備)的內核。只有當
    其它內核中的 SCSI 驅動程序在啟動時引起系統掛斷(可能是由于系統中矛盾的配置,
    個內建的 IDE 軟盤驅動程序使你能從 LS120 或 ZIP 設備上安裝。


############## 原文

 <sect id="newinst">What's New in the Installation System?

  <p>The <package>boot-floppies</package> and the <package/debian-cd/
  packages include a number of improvements over Debian 2.1. There have been
  notable improvements in network installation support, including DHCP
  configuration support. More architectures support serial console

  <p>The old profiles and tasks selection system has been replaced by Debian
  "meta-packages" (packages whose only purpose is to depend on other
  packages) and an interface called <package/tasksel/.  This means that
  tasks can be used at any time, not just installation time, and can be
  retained across upgrades.

  <p>Post-reboot configuration, which used to be performed by a batch of
  shell scripts, are now performed by the <package/base-config/ package,
  which uses <package/debconf/.  It is expected that for the next major
  Debian release, <package/debconf/ will be the main interface users
  interact with during installation and configuration.

<![ %i386 [
  <p>Kernel images are available in various "flavors". These flavors each
  support a different set of hardware. The flavors available in &debian;
  &release; for &arch-title; are:

    <item>The standard kernel package available in Debian. This includes
    almost all drivers supported by Linux built as modules. This includes
    drivers for network devices, SCSI devices, sound cards, Video4Linux
    devices, etc. The `vanilla' flavor includes one rescue, one root and
    three driver disks.

    <item>Very similar to `vanilla', except it includes Andre Hedrick's
    IDE patches to support UDMA66 devices.

    <item>Like `vanilla', but with many of the less-frequently-use drivers
    removed (sound, v4l, etc). In addition, it has built in support for
    several popular PCI ethernet devices -- NE2000, 3COM 3c905, Tulip,
    Via-Rhine and Intel EtherExpress Pro100. These built in drivers allow
    you to take full advantage of the Debian installer's net install feature
    to install the driver and/or base system over the network so that only
    the root and rescue disks need to be made. Finally, `compact' also
    supports several common RAID controllers: DAC960, and Compaq's SMART2
    RAID controllers. The `compact' flavor includes one rescue, one root and
    one driver disks.

    <item>Kernel that supports only IDE and PCI devices (and a very small
    number of ISA devices). This kernel should be used if the SCSI drivers
    in the other flavors cause your system to hang on startup (probably
    because of resource conflicts, or a misbehaving driver/card in your
    system). The `idepci' flavor also has a built-in ide-floppy driver so
    that you can install from LS120 or ZIP devices.

  The kernel config files for these flavors can be found in their respective
  directories in a file named "kernel-config".

Best regard

| This message was re-posted from debian-chinese-gb@lists.debian.org
| and converted from gb2312 to big5 by an automatic gateway.

Reply to: