--- Begin Message ---
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/i386/20040710/sarge-i386-netinst.iso
uname -a:
Linux catinguera 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 i686 GNU/Linux
Date:
2004/07/13 19:30
Method:
I installed through cdrom
Machine:
This is a generic machine with PcChips motherboard M726, chipset ALi,
video S3 virge AGP 1.0x, network Realtek 8139, HD Samsung SV2042D 20 GB,
CDRW LG GCE-8525B, HD FUJITSU MPD3043AT 4.3 GB, sound SB AWE 32 isa,
modem USR 2976 pci, USB ohci
Processor: PIII 450 MHz
Memory: 256 MB
Root Device: IDE /dev/hda1
Root Size/partition table:
Sist. Arq. 1K-blocos Usad Dispon. Uso% Montado em
/dev/hda1 9612100 896292 8227536 10% /
tmpfs 128544 0 128544 0% /dev/shm
/dev/hda5 4806048 89928 4471984 2% /home
/dev/hdc1 4157656 1918316 2028136 49% /mnt
Output of lspci and lspci -n:
lspci
0000:00:00.0 Host bridge: ALi Corporation M1621 (rev 05)
0000:00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller (rev 01)
0000:00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge
[Aladdin IV] (rev b4)
0000:00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev 20)
0000:00:10.0 Serial controller: 5610 56K FaxModem 56K FaxModem Model
5610 (rev 01)
0000:00:12.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: S3 Inc. ViRGE/GX2 (rev 04)
lspci -n
0000:00:00.0 Class 0600: 10b9:1621 (rev 05)
0000:00:01.0 Class 0604: 10b9:5247 (rev 01)
0000:00:02.0 Class 0c03: 10b9:5237 (rev 03)
0000:00:07.0 Class 0601: 10b9:1533 (rev b4)
0000:00:0f.0 Class 0101: 10b9:5229 (rev 20)
0000:00:10.0 Class 0700: 12b9:1008 (rev 01)
0000:00:12.0 Class 0200: 10ec:8139 (rev 10)
0000:01:00.0 Class 0300: 5333:8a10 (rev 04)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
My sound card wasn't recognized.
I thought the dialog for the partition disk a little confuse. I mean,
where is the correct option to choose, because I wanted to change my
partition table.
That's it.
--
jupercio juliano
----------------
Usuário de software livre:
Jabber: jupercio at jabber.org
--- End Message ---