| Package: installation-reports Boot method: USB netinst Image version: http://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/buster_di_rc1+nonfree/amd64/iso-cd/firmware-buster-DI-rc1-amd64-netinst.iso Date: 3 May 2019 05.00 UT (approx) Machine: Intel NUC5PPYH Processor:Intel Pentium N3700 Memory: 4 Gb Partitions: <df -Tl will do; the raw partition table is preferred> Filesystem Type 1K-blocks Used Available Use% Mounted on udev devtmpfs 1960140 0 1960140 0% /dev tmpfs tmpfs 395976 20992 374984 6% /run /dev/sda2 ext4 20863544 4977644 14803020 26% / tmpfs tmpfs 1979872 51680 1928192 3% /dev/shm tmpfs tmpfs 5120 4 5116 1% /run/lock tmpfs tmpfs 1979872 0 1979872 0% /sys/fs/cgroup /dev/sda6 ext4 80671208 108428 76421828 1% /home /dev/sda5 ext4 1272452 3988 1185776 1% /tmp /dev/sda3 ext4 7252920 692496 6172280 11% /var /dev/sda1 vfat 523248 5196 518052 1% /boot/efi tmpfs tmpfs 395972 36 395936 1% /run/user/1000 Output of lspci -knn (or lspci -nn): chris@NucPent1:~$ lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:2280] (rev 21) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:7270] Kernel driver in use: iosf_mbi_pci 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:7270] Kernel driver in use: i915 Kernel modules: i915 00:12.0 SD Host controller [0805]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SD Controller [8086:2296] (rev 21) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SD Controller [8086:2060] Kernel driver in use: sdhci-pci Kernel modules: sdhci_pci 00:13.0 SATA controller [0106]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller [8086:22a3] (rev 21) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller [8086:2060] Kernel driver in use: ahci Kernel modules: ahci 00:14.0 USB controller [0c03]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [8086:22b5] (rev 21) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [8086:2060] Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:18.0 DMA controller [0801]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series LPIO2 DMA Controller [8086:22c0] (rev 21) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series LPIO2 DMA Controller [8086:2060] 00:18.6 Serial bus controller [0c80]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series LPIO2 I2C Controller #6 [8086:22c6] (rev 21) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series LPIO2 I2C Controller [8086:2060] Kernel driver in use: i2c-designware-pci Kernel modules: i2c_designware_pci 00:18.7 Serial bus controller [0c80]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series LPIO2 I2C Controller #7 [8086:22c7] (rev 21) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series LPIO2 I2C Controller [8086:2060] Kernel driver in use: i2c-designware-pci Kernel modules: i2c_designware_pci 00:1a.0 Encryption controller [1080]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [8086:2298] (rev 21) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [8086:2060] 00:1b.0 Audio device [0403]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller [8086:2284] (rev 21) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller [8086:2060] Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 [8086:22c8] (rev 21) Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #2 [8086:22ca] (rev 21) Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #3 [8086:22cc] (rev 21) Kernel driver in use: pcieport 00:1f.0 ISA bridge [0601]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU [8086:229c] (rev 21) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU [8086:2060] Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.3 SMBus [0c05]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller [8086:2292] (rev 21) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller [8086:2060] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 02:00.0 Network controller [0280]: Intel Corporation Wireless 3165 [8086:3165] (rev 81) Subsystem: Intel Corporation Dual Band Wireless AC 3165 [8086:4010] Kernel driver in use: iwlwifi Kernel modules: iwlwifi 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) Subsystem: Intel Corporation RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [8086:2060] Kernel driver in use: r8169 Kernel modules: r8169 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: Install appeared to go fine. Installed standard MATE desktop. (no others) On first (and subsequent boots) no graphical login screen came up but cli on Ctrl + Alt + F1 was fine. I used apt-get to install Gnome and selected gdm during the installation and then had a graphical login. I could select MATE as the desktop during login and that works fine. I guess lightdm isn’t working or didn’t install correctly. I have no idea how to go back to lightdm even if I do a re-install.
Chris Barnard |