[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#839595: flash-kernel: Please add support for SolidRun Clearfog

I was just looking at this bug report and it seems Karsten was never
copied on Christoph's last email (see below).

* Christoph Egger <christoph@sieglitzhof.net> [2016-10-24 15:22]:
> Hi!
> This seems to be the "new" default environment:
> => printenv
> arch=arm
> baudrate=115200
> board=clearfog
> board_name=clearfog
> boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
> boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootarm.efi; if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
> boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}extlinux/extlinux.conf
> boot_net_usb_start=usb start
> boot_prefixes=/ /boot/
> boot_script_dhcp=boot.scr.uimg
> boot_scripts=boot.scr.uimg boot.scr
> boot_targets=mmc0 usb0 pxe dhcp 
> bootcmd=run distro_bootcmd
> bootcmd_dhcp=run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; if test -z "${fdtfile}" -a -n "${soc}"; then setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; fi; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00010:UNDI:003000;setenv bootp_arch 0xa;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci;
> bootcmd_mmc0=setenv devnum 0; run mmc_boot
> bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
> bootcmd_usb0=setenv devnum 0; run usb_boot
> bootdelay=3
> console=ttyS0,115200
> cpu=armv7
> devnum=0
> devplist=1
> devtype=mmc
> distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
> efi_dtb_prefixes=/ /dtb/ /dtb/current/
> fdt_addr_r=0x100000
> fdt_high=0x10000000
> fdtcontroladdr=3fb4ce58
> fdtfile=armada-388-clearfog.dtb
> initrd_high=0x10000000
> kernel_addr_r=0x800000
> load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
> mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi
> pxefile_addr_r=0x300000
> ramdisk_addr_r=0x1800000
> scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
> scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
> scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; if test -z "${fdtfile}" -a -n "${soc}"; then setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; fi; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootarm.efi; then echo Found EFI removable media binary efi/boot/bootarm.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
> scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}extlinux/extlinux.conf; then echo Found ${prefix}extlinux/extlinux.conf; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
> scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
> scriptaddr=0x200000
> soc=mvebu
> stderr=serial@12000
> stdin=serial@12000
> stdout=serial@12000
> usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run scan_dev_for_boot_part; fi
> vendor=solidrun
> Environment size: 3819/65532 bytes
> -- 
> 9FED 5C6C E206 B70A 5857  70CA 9655 22B9 D49A E731
> Debian Developer | Lisp Hacker | CaCert Assurer

Martin Michlmayr

Reply to: