Bug#273774: marked as done (xserver-xfree86: [debconf] set subarchitecture-based Macintosh defaults for keyboard on m68k and powerpc Macs)
Your message dated Sat, 20 Feb 2016 18:57:31 +0300
with message-id <20160220155730.GE2433@debian.lan>
and subject line Closing #273774: set subarchitecture-based keyboard on m68k and powerpc Macs
has caused the Debian Bug report #273774,
regarding xserver-xfree86: [debconf] set subarchitecture-based Macintosh defaults for keyboard on m68k and powerpc Macs
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)
--
273774: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=273774
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Sat Jun 19 22:18:50 BRT 2004 Debian GNU/Linux testing "Sarge" - Official Snapshot i386 Binary-1 CD (12/06/204)
uname -a: Linux mob.intranet.corpo5.com.br 2.4.25-1-686 #3 Wed Apr 14 21:56:44 EST 2004 i686 GNU/Linux
Date: Sat Jun 19 22:18:50 BRT 2004
Method: How did you install? from cd CD 1
Machine: HP Pavilion ze4610us
Processor: mobile AMD Athlon XP2500+
Memory: 256 MB
Root Device: /dev/hda
Root Size/partition table:
mob:/# cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda3 / ext3 defaults,errors=remount-ro 0 1
/dev/hda2 /boot ext2 defaults 0 2
/dev/hda12 /home ext3 defaults 0 2
/dev/hda13 /tmp ext3 defaults 0 2
/dev/hda5 /usr ext3 defaults 0 2
/dev/hda7 /usr/local ext3 defaults 0 2
/dev/hda6 /usr/share ext3 defaults 0 2
/dev/hda11 /var ext3 defaults 0 2
/dev/hda10 /var/account ext3 defaults 0 2
/dev/hda9 /var/log ext3 defaults 0 2
/dev/hda8 /var/tmp ext3 defaults 0 2
/dev/hda14 none swap sw 0 0
/dev/hda15 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/hda1 never ntfs argh
h
h
h (they didn't let me remove ruindows (ruin = badly done)
Output of lspci and lspci -n:
mob:/# lspci
pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 Host bridge: ATI Technologies Inc AGP Bridge [IGP 320M] (rev 13)
0000:00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 320M] (rev 01)
0000:00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
0000:00:08.0 Modem: ALi Corporation Intel 537 [M5457 AC-Link Modem]
0000:00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
0000:00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
0000:00:11.0 Bridge: ALi Corporation M7101 PMU
0000:00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
0000:01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1
mob:/#
mob:/# lspci -n
pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 Class 0600: 1002:cab0 (rev 13)
0000:00:01.0 Class 0604: 1002:700f (rev 01)
0000:00:02.0 Class 0c03: 10b9:5237 (rev 03)
0000:00:06.0 Class 0401: 10b9:5451 (rev 02)
0000:00:07.0 Class 0601: 10b9:1533
0000:00:08.0 Class 0703: 10b9:5457
0000:00:0a.0 Class 0607: 1217:6972
0000:00:10.0 Class 0101: 10b9:5229 (rev c4)
0000:00:11.0 Class 0680: 10b9:7101
0000:00:12.0 Class 0200: 100b:0020
0000:01:05.0 Class 0300: 1002:4336
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
- Configure /etc/network/inerfaces and you are online;
- Detect the wrong vga card (apm instead of ati);
- Detect the wrong sound card (trident instead of ali5451);
- The alsa package is kernel 2.4.25 and the installed kernel is 2.4.26;
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Well, you did not say if I should attach those logs...
I guess I should not (almost 1 MB) =]
--- End Message ---
--- Begin Message ---
Hello,
In this very old bug (2004) you reported the following:
> 1) i still get proposed a macintosh keyboard by default. i need an pc105
> one. Maybe it would be possible to check the subarch, if it is a pmac, then
> propose macintosh, if not, then propose pcXXX stuff.
>
> 2) it proposed me the us keyboard. Maybe this could be taken from the chosen
> language used for the console and found in the debconf database ?
I believe now console-setup does all this so I can close the bug.
Anton Zinoviev
--- End Message ---
Reply to: