[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#809932: installation-reports: Successful install of Debian Stretch on Sheevaplug



Package: installation-reports
Severity: normal

Dear Maintainer,

First, I upgraded U-boot on the machine to version "2014.10+dfsg1-5"
Second, I downloaded uImage and uInitrd from
    https://d-i.debian.org/daily-images/armel/daily/kirkwood/netboot/marvell/sheevaplug/
and put them on a USB stick (8GB) prepared with an ext2 filesystem.
Then I connected to the serial port (using "screen -L /dev/ttyUSB0 115200")
and followed the instructions on Martin's website
    http://www.cyrius.com/debian/kirkwood/sheevaplug/install/
to boot the installer.
At the first installer screen, I hit "back" a couple of times till I got to the main menu
where I could get a screen that allowed me to change the installer priority
to "low" (i.e. to make it an "expert" install)
Then I followed the normal installation procedure til it got to the screen asking which
non-standard udebs I wanted to install.  I chose the network-console so I could log in
via ssh with a larger screen than 24x80.

After that, it was just answering questions as usual, taking defaults whenever I could.
When it got to tasksel, I chose a basic installation with only the ssh server enabled,
but nothing else.

After the reboot (and some more u-boot magic from Martin's web page) I used tasksel
to install the print-server task.  No problems were encountered.
I also moved /tmp to tmpfs

-- Package-specific info:

Boot method: I followed the instructions from Martin Michlmayer's web page,
Image version: I got the uI* files from
    https://d-i.debian.org/daily-images/armel/daily/kirkwood/netboot/
Date: 2015/01/03 about 23:30 UTC

Machine: Stock Sheevaplug without SATA
Partitions: <df -Tl will do; the raw partition table is preferred>
Disk /dev/sda: 7.2 GiB, 7748222976 bytes, 15133248 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x74cb16e8

Device     Boot   Start      End  Sectors  Size Id Type
/dev/sda1  *       2048   499711   497664  243M 83 Linux
/dev/sda2        499712  4829183  4329472  2.1G 83 Linux
/dev/sda3       4831230 15132671 10301442  4.9G  5 Extended
/dev/sda5       4831232  5294079   462848  226M 82 Linux swap / Solaris
/dev/sda6       5296128 15132671  9836544  4.7G 83 Linux

Filesystem     Type     1K-blocks    Used Available Use% Mounted on
udev           devtmpfs     10240       0     10240   0% /dev
tmpfs          tmpfs       102788     348    102440   1% /run
/dev/sda2      ext4       2065152 1878636     61896  97% /
tmpfs          tmpfs       256964       0    256964   0% /dev/shm
tmpfs          tmpfs         5120       0      5120   0% /run/lock
tmpfs          tmpfs       256964       0    256964   0% /sys/fs/cgroup
tmpfs          tmpfs       102400      20    102380   1% /tmp
/dev/sda6      ext4       4709920    9736   4437888   1% /home
/dev/sda1      ext2        240972   44594    183937  20% /boot
tmpfs          tmpfs        51396       0     51396   0% /run/user/1000


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [o]
Detect network card:    [o]
Configure network:      [o]
Detect CD:              [ ]
Load installer modules: [o]
Clock/timezone setup:   [o]
User/password setup:    [o]
Detect hard drives:     [o]
Partition hard drives:  [o] see note 1
Install base system:    [o]
Install tasks:          [o]
Install boot loader:    [ ]
Overall install:        [o]

Comments/Problems:

    note 1: As you can see from the partition table shown above, It took
almost 5GB of the 8GB USB stick I gave it for /home.  This leaves root
and swap perilously little space for anything but a very basic install.

If I ran the world, I'd make sure that the root ("everything but /home and swap)
partition got at least 4GB; and swap got at least 4 times the size of system RAM.


-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.

Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="9 (stretch) - installer build 20160104-00:05"
X_INSTALLATION_MEDIUM=netboot

==============================================
Installer hardware-summary:
==============================================
uname -a: Linux sheeva 4.3.0-1-kirkwood #1 Debian 4.3.3-4 (2016-01-03) armv5tel GNU/Linux
usb-list: 
usb-list: Bus 01 Device 01: EHCI Host Controller [1d6b:0002]
usb-list:    Level 00 Parent 00 Port 00  Class 09(hub  ) Subclass 00 Protocol 01
usb-list:    Manufacturer: Linux 4.3.0-1-kirkwood ehci_hcd
usb-list:    Interface 00: Class 09(hub  ) Subclass 00 Protocol 00 Driver hub
usb-list: 
usb-list: Bus 01 Device 02: USB DISK 2.0 [13fe:4100]
usb-list:    Level 01 Parent 01 Port 00  Class 00(>ifc ) Subclass 00 Protocol 00
usb-list:    Manufacturer:         
usb-list:    Interface 00: Class 08(mstor) Subclass 06 Protocol 50 Driver usb-storage
lsmod: Module                  Size  Used by
lsmod: dm_mod                 86182  0
lsmod: md_mod                107660  0
lsmod: jfs                   156468  0
lsmod: crc32c_generic          1593  1
lsmod: btrfs                 997092  0
lsmod: xor                     4321  1 btrfs
lsmod: raid6_pq               87146  1 btrfs
lsmod: vfat                    8653  0
lsmod: fat                    49558  1 vfat
lsmod: ext4                  485959  3
lsmod: crc16                   1261  1 ext4
lsmod: mbcache                 5650  1 ext4
lsmod: jbd2                   80618  1 ext4
lsmod: sd_mod                 28714  5
lsmod: usb_storage            42982  4
lsmod: scsi_mod              174053  2 usb_storage,sd_mod
lsmod: mmc_block              24550  0
lsmod: ehci_orion              3050  0
lsmod: ehci_hcd               50287  1 ehci_orion
lsmod: mvsdio                  9166  0
lsmod: mmc_core              105819  2 mmc_block,mvsdio
lsmod: mvmdio                  3100  0
lsmod: mv643xx_eth            26611  0
lsmod: usbcore               142576  3 usb_storage,ehci_hcd,ehci_orion
lsmod: of_mdio                 2709  3 mvmdio,mv643xx_eth
lsmod: libphy                 23500  3 mvmdio,of_mdio,mv643xx_eth
lsmod: usb_common              3026  1 usbcore
df: Filesystem           1K-blocks      Used Available Use% Mounted on
df: none                     51396        64     51332   0% /run
df: devtmpfs                253472         0    253472   0% /dev
df: /dev/sda2              2065152    586144   1354388  30% /target
df: /dev/sda1               240972     29441    199090  13% /target/boot
df: /dev/sda6              4709920      9640   4437984   0% /target/home
df: /dev/sda2              2065152    586144   1354388  30% /dev/.static/dev
df: devtmpfs                253472         0    253472   0% /target/dev
free:              total         used         free       shared      buffers
free: Mem:        513932       404520       109412        47696        35908
free: -/+ buffers:             368612       145320
free: Swap:       231420        11008       220412
/proc/cmdline: console=ttyS0,115200n8 base-installer/initramfs-tools/driver-policy=most
/proc/cpuinfo: processor	: 0
/proc/cpuinfo: model name	: Feroceon 88FR131 rev 1 (v5l)
/proc/cpuinfo: BogoMIPS	: 1185.79
/proc/cpuinfo: Features	: swp half thumb fastmult edsp 
/proc/cpuinfo: CPU implementer	: 0x56
/proc/cpuinfo: CPU architecture: 5TE
/proc/cpuinfo: CPU variant	: 0x2
/proc/cpuinfo: CPU part	: 0x131
/proc/cpuinfo: CPU revision	: 1
/proc/cpuinfo: 
/proc/cpuinfo: Hardware	: Marvell Kirkwood (Flattened Device Tree)
/proc/cpuinfo: Revision	: 0000
/proc/cpuinfo: Serial		: 0000000000000000
/proc/device-tree/model: Globalscale Technologies SheevaPlug/proc/iomem: 00000000-1fffffff : System RAM
/proc/iomem:   00008000-0050438b : Kernel code
/proc/iomem:   00548000-005e312b : Kernel data
/proc/iomem: f1001418-f100141b : kirkwood_cpuidle
/proc/iomem:   f1001418-f100141b : kirkwood_cpuidle
/proc/iomem: f1010000-f101001f : /ocp@f1000000/pin-controller@10000
/proc/iomem: f1010100-f101013f : /ocp@f1000000/gpio@10100
/proc/iomem: f1010140-f101017f : /ocp@f1000000/gpio@10140
/proc/iomem: f1010300-f101031f : /ocp@f1000000/rtc@10300
/proc/iomem: f1012000-f10120ff : serial
/proc/iomem: f1020104-f1020107 : kirkwood-cpufreq
/proc/iomem:   f1020104-f1020107 : kirkwood-cpufreq
/proc/iomem: f1020110-f1020117 : bridge-interrupt-ctrl
/proc/iomem: f1020200-f102020f : main-interrupt-ctrl
/proc/iomem: f1020210-f102021f : main-interrupt-ctrl
/proc/iomem: f1050000-f1050fff : /ocp@f1000000/ehci@50000
/proc/iomem: f1082000-f1082333 : /ocp@f1000000/sata-phy@82000
/proc/iomem: f1084000-f1084333 : /ocp@f1000000/sata-phy@84000
/proc/iomem: f1090000-f10901ff : /ocp@f1000000/mvsdio@90000
/proc/iomem: f4000000-f40003ff : /mbus/nand@012f
/proc/interrupts:            CPU0       
/proc/interrupts:  17:     469514  bridge-interrupt-ctrl   2 Edge      orion_event
/proc/interrupts:  26:       4051  main-interrupt-ctrl  33 Edge      serial
/proc/interrupts:  29:     280988  main-interrupt-ctrl  19 Edge      ehci_hcd:usb1
/proc/interrupts:  30:      57816  main-interrupt-ctrl  46 Edge      f1072004.mdio-bus
/proc/interrupts:  31:          1  main-interrupt-ctrl  53 Edge      f1010300.rtc
/proc/interrupts:  32:      10031  main-interrupt-ctrl  28 Edge      mvsdio
/proc/interrupts:  83:          2  main-interrupt-ctrl   5 Edge      f1060800.xor
/proc/interrupts:  84:          2  main-interrupt-ctrl   7 Edge      f1060900.xor
/proc/interrupts:  85:     135572  main-interrupt-ctrl  11 Edge      eth0
/proc/interrupts: Err:          0
/proc/meminfo: MemTotal:         513932 kB
/proc/meminfo: MemFree:          109412 kB
/proc/meminfo: MemAvailable:     380800 kB
/proc/meminfo: Buffers:           35908 kB
/proc/meminfo: Cached:           266156 kB
/proc/meminfo: SwapCached:         2924 kB
/proc/meminfo: Active:           144332 kB
/proc/meminfo: Inactive:         218020 kB
/proc/meminfo: Active(anon):      13608 kB
/proc/meminfo: Inactive(anon):    94376 kB
/proc/meminfo: Active(file):     130724 kB
/proc/meminfo: Inactive(file):   123644 kB
/proc/meminfo: Unevictable:           0 kB
/proc/meminfo: Mlocked:               0 kB
/proc/meminfo: HighTotal:             0 kB
/proc/meminfo: HighFree:              0 kB
/proc/meminfo: LowTotal:         513932 kB
/proc/meminfo: LowFree:          109412 kB
/proc/meminfo: SwapTotal:        231420 kB
/proc/meminfo: SwapFree:         220412 kB
/proc/meminfo: Dirty:               636 kB
/proc/meminfo: Writeback:             0 kB
/proc/meminfo: AnonPages:         57408 kB
/proc/meminfo: Mapped:             4824 kB
/proc/meminfo: Shmem:             47696 kB
/proc/meminfo: Slab:              32488 kB
/proc/meminfo: SReclaimable:      28528 kB
/proc/meminfo: SUnreclaim:         3960 kB
/proc/meminfo: KernelStack:         688 kB
/proc/meminfo: PageTables:          864 kB
/proc/meminfo: NFS_Unstable:          0 kB
/proc/meminfo: Bounce:                0 kB
/proc/meminfo: WritebackTmp:          0 kB
/proc/meminfo: CommitLimit:      488384 kB
/proc/meminfo: Committed_AS:     126444 kB
/proc/meminfo: VmallocTotal:     499712 kB
/proc/meminfo: VmallocUsed:        6000 kB
/proc/meminfo: VmallocChunk:     487428 kB

-- System Information:
Debian Release: stretch/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing')
Architecture: armel (armv5tel)

Kernel: Linux 4.3.0-1-kirkwood
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)


Reply to: