[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#737683: Package: installation-reports




Package: installation-reports

Boot method: cd
Image version:
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/,
last updated 2014-02-03, 05:12
Date: 2014-02-03, 12.00


Processor: AMD Athlon(tm) XP 2000+
Memory: MemTotal:        1032544 kB
Partitions:

System plików  Typ      1K-blocks   użyte dostępne %uż. zamont. na
/dev/sda6      ext4      19092180 2184336 15914976  13% /
udev           devtmpfs     10240       0    10240   0% /dev
tmpfs          tmpfs       103256     228   103028   1% /run
tmpfs          tmpfs         5120       0     5120   0% /run/lock
tmpfs          tmpfs       401680       0   401680   0% /run/shm
/dev/sda7      ext4      46993784 3683300 40900296   9% /home


Output of lspci -knn (or lspci -nn):

00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333] [1106:3099]
	Subsystem: ASRock Incorporation K7VT2 motherboard [1849:3099]
	Kernel driver in use: agpgart-via
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] [1106:b099]
00:0d.0 Communication controller [0780]: Conexant Systems, Inc. HSF 56k
HSFi Modem [14f1:2f00] (rev 01)
	Subsystem: Conexant Systems, Inc. Dynalink 56PMi [14f1:2004]
00:10.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 80)
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
	Kernel driver in use: uhci_hcd
00:10.1 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 80)
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
	Kernel driver in use: uhci_hcd
00:10.2 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 80)
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
	Kernel driver in use: uhci_hcd
00:10.3 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104]
(rev 82)
	Subsystem: VIA Technologies, Inc. USB 2.0 Controller [1106:3104]
	Kernel driver in use: ehci-pci
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge
[1106:3177]
	Subsystem: ASRock Incorporation K7VT series Motherboards [1849:3177]
00:11.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev
06)
	Subsystem: ASRock Incorporation K7VT series Motherboards [1849:0571]
	Kernel driver in use: pata_via
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50)
	Subsystem: VIA Technologies, Inc. K7VT2 motherboard [1106:4161]
	Kernel driver in use: snd_via82xx
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102
[Rhine-II] [1106:3065] (rev 74)
	Subsystem: ASRock Incorporation K7VT series Motherboards [1849:3065]
	Kernel driver in use: via-rhine
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV17
[GeForce4 MX 440] [10de:0171] (rev a3)
	Kernel driver in use: nouveau


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [E]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [E]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:

When trying to use "graphical install" I kept getting "gtk-warning: cannot
open display", no matter which environment I chose. I switched to regular
install, it went fine until the "install tasks" step, it did not get
completed - I retried but got the same result and just skipped this step.
The base system installed fine, I installed components of choice manually
from the command line, the system (and the graphical environment) seems to
be running just fine.


Reply to: