Bug#736195: Installation-Report
Package: installation-reports
Wheezy_amd64: Linux debian 3.2.0-4-amd64
Boot method: <How did you boot the installer? CD? floppy? network?> network-CD I tried all versions inclusive jessie_amd64
Image version: <Full URL to image you downloaded is best> no matter: all versions with 3.x.x kernels
Date: <Date and time of the install> 30.05.2013
Machine: <Description of machine (eg, IBM Thinkpad R32)> Mainboard GIGABYTE 990 XA-UD3
Processor: AMD64 FX(tmp)-6300 Six-Core Prozessor, BIOS: GIGABYTE UEFI Dual BIOS, Version FB
Memory: RAM 8 Gbyte
Partitions: <df -Tl will do; the raw partition table is preferred>
Output of lspci -knn (or lspci -nn):
for output dmesg, lsmod, lspci, lsusb:http://nopaste.debianforum.de/37181
or look appendix 37181.txt
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [0] no USB 2.0 Devixces
Partition hard drives: [O]
Install base system: [E]
Clock/timezone setup: [O]
User/password setup: [0]
Install tasks: [E] none Network
Install boot loader: [E]
Overall install: [E]
Comments/Problems:
Hello very revered Installer team,
I've failed when installing Debian Wheezy_amd64 and I have long been
trying to find himself a solution. In Debian forum I have described
as "Rainer50" my problem, download the installer can not install a network and all USB 2.0
devices are not working!
All 3.xxx kernel of different distributions could not be installed,
no "live-system" too.
The version of Squeeze_amd64 and Wheezy_amd32 I was able to install the other hand
By chance I discovered the solution:
In the bios I had to "IOMMU" to enabled set!
For questions I am happy to Have.
My first Debian was "Potato" and I appreciate your work very much.
Unfortunately, I can barely English, so I use an automatic
translation.
All Details about the failed installation are in the last link (http://nopaste...)
Links:
http://debianforum.de/forum/viewtopic.php?f=12&t=143379&hilit=amd64+Wheezy#p940849
http://debianforum.de/forum/viewtopic.php?f=12&t=142731
Output: dmesg, lsmod, lspci, lsusb für kernel 3.2.0-4-amd64:
http://nopaste.debianforum.de/37181
Sincerely yours
Rainer
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=5ab4dd43-dbba-402a-8f28-cf2795424ae7 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000beb80000 (usable)
[ 0.000000] BIOS-e820: 00000000beb80000 - 00000000bf13e000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf13e000 - 00000000bf537000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf537000 - 00000000bf857000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf857000 - 00000000bf858000 (usable)
[ 0.000000] BIOS-e820: 00000000bf858000 - 00000000bfa5e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfa5e000 - 00000000bff00000 (usable)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100001000 - 000000023f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990XA-UD3, BIOS FB 12/07/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BFF00000 mask FFFFFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd850] fd850
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bff00000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bff00000 page 4k
[ 0.000000] kernel direct mapping tables up to bff00000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100001000-000000023f000000
[ 0.000000] 0100001000 - 0100200000 page 4k
[ 0.000000] 0100200000 - 0140000000 page 2M
[ 0.000000] 0140000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 023f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 23f000000 @ bfefc000-bff00000
[ 0.000000] RAMDISK: 36c74000 - 37632000
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000bf51a070 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000bf520810 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 00000000bf51a170 0669D (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf531f80 00040
[ 0.000000] ACPI: APIC 00000000bf520908 0008E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000bf520998 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000bf5209e0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 00000000bf520a20 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 00000000bf520a58 01158 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: MATS 00000000bf521bb0 00034 (v02 ALASKA A M I 00000002 w?x2 00000000)
[ 0.000000] ACPI: BGRT 00000000bf521be8 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000023f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000023f000000
[ 0.000000] NODE_DATA [000000023effb000 - 000000023effffff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880236600000-ffff88023d5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0023f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000beb80
[ 0.000000] 0: 0x000bf857 -> 0x000bf858
[ 0.000000] 0: 0x000bfa5e -> 0x000bff00
[ 0.000000] 0: 0x00100001 -> 0x0023f000
[ 0.000000] On node 0 totalpages: 2088880
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 763995 pages, LIFO batch:31
[ 0.000000] Normal zone: 17864 pages used for memmap
[ 0.000000] Normal zone: 1288759 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000beb80000 - 00000000bf13e000
[ 0.000000] PM: Registered nosave memory: 00000000bf13e000 - 00000000bf537000
[ 0.000000] PM: Registered nosave memory: 00000000bf537000 - 00000000bf857000
[ 0.000000] PM: Registered nosave memory: 00000000bf858000 - 00000000bfa5e000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
[ 0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
[ 0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
[ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
[ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:38100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023ec00000 s82944 r8192 d23552 u262144
[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2056675
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=5ab4dd43-dbba-402a-8f28-cf2795424ae7 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ f8000000 size 64 MB
[ 0.000000] Memory: 8155596k/9420800k available (3420k kernel code, 1065280k absent, 199924k reserved, 3318k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:1272 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3516.048 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7032.09 BogoMIPS (lpj=14064192)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004035] Security Framework initialized
[ 0.004038] AppArmor: AppArmor disabled by boot time parameter
[ 0.004483] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006408] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007245] Mount-cache hash table entries: 256
[ 0.007326] Initializing cgroup subsys cpuacct
[ 0.007329] Initializing cgroup subsys memory
[ 0.007338] Initializing cgroup subsys devices
[ 0.007341] Initializing cgroup subsys freezer
[ 0.007342] Initializing cgroup subsys net_cls
[ 0.007344] Initializing cgroup subsys blkio
[ 0.007348] Initializing cgroup subsys perf_event
[ 0.007369] tseg: 00bff00000
[ 0.007370] CPU: Physical Processor ID: 0
[ 0.007371] CPU: Processor Core ID: 0
[ 0.007372] mce: CPU supports 7 MCE banks
[ 0.007631] ACPI: Core revision 20110623
[ 0.012375] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.055214] CPU0: AMD FX(tm)-6300 Six-Core Processor stepping 00
[ 0.056003] Performance Events: AMD Family 15h PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 48
[ 0.056003] ... generic registers: 6
[ 0.056003] ... value mask: 0000ffffffffffff
[ 0.056003] ... max period: 00007fffffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000000003f
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Booting Node 0, Processors #1
[ 0.056003] smpboot cpu 1: start_ip = 99000
[ 0.144029] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144125] #2
[ 0.144127] smpboot cpu 2: start_ip = 99000
[ 0.236026] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.236096] #3
[ 0.236097] smpboot cpu 3: start_ip = 99000
[ 0.328030] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.328094] #4
[ 0.328095] smpboot cpu 4: start_ip = 99000
[ 0.420036] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.420108] #5 Ok.
[ 0.420109] smpboot cpu 5: start_ip = 99000
[ 0.512041] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.512054] Brought up 6 CPUs
[ 0.512056] Total of 6 processors activated (42191.62 BogoMIPS).
[ 0.516175] devtmpfs: initialized
[ 0.521733] PM: Registering ACPI NVS region at bf13e000 (4165632 bytes)
[ 0.521733] PM: Registering ACPI NVS region at bf858000 (2121728 bytes)
[ 0.521733] print_constraints: dummy:
[ 0.521733] NET: Registered protocol family 16
[ 0.521733] Extended Config Space enabled on 1 nodes
[ 0.521733] ACPI: bus type pci registered
[ 0.521733] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.521733] PCI: not using MMCONFIG
[ 0.521733] PCI: Using configuration type 1 for base access
[ 0.521733] PCI: Using configuration type 1 for extended access
[ 0.521733] bio: create slab <bio-0> at 0
[ 0.521733] ACPI: Added _OSI(Module Device)
[ 0.521733] ACPI: Added _OSI(Processor Device)
[ 0.521733] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.521733] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.521733] ACPI: EC: Look up EC in DSDT
[ 0.524439] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.536451] ACPI: Interpreter enabled
[ 0.536456] ACPI: (supports S0 S3 S4 S5)
[ 0.536470] ACPI: Using IOAPIC for interrupt routing
[ 0.536585] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.536618] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.574166] ACPI: No dock devices found.
[ 0.574168] HEST: Table not found.
[ 0.574171] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.574312] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.574532] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
[ 0.574534] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
[ 0.574536] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
[ 0.574538] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.574539] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.574541] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.574543] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
[ 0.574557] pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600
[ 0.574614] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
[ 0.574645] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.574661] pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604
[ 0.574690] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.574707] pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604
[ 0.574736] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.574749] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604
[ 0.574778] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.574800] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.574815] pci 0000:00:11.0: reg 10: [io 0xf090-0xf097]
[ 0.574822] pci 0000:00:11.0: reg 14: [io 0xf080-0xf083]
[ 0.574829] pci 0000:00:11.0: reg 18: [io 0xf070-0xf077]
[ 0.574837] pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063]
[ 0.574844] pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f]
[ 0.574851] pci 0000:00:11.0: reg 24: [mem 0xfe40b000-0xfe40b3ff]
[ 0.574896] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.574906] pci 0000:00:12.0: reg 10: [mem 0xfe40a000-0xfe40afff]
[ 0.574959] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.574975] pci 0000:00:12.2: reg 10: [mem 0xfe409000-0xfe4090ff]
[ 0.575036] pci 0000:00:12.2: supports D1 D2
[ 0.575038] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.575056] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.575066] pci 0000:00:13.0: reg 10: [mem 0xfe408000-0xfe408fff]
[ 0.575125] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.575138] pci 0000:00:13.2: reg 10: [mem 0xfe407000-0xfe4070ff]
[ 0.575198] pci 0000:00:13.2: supports D1 D2
[ 0.575199] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.575218] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.575271] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.575281] pci 0000:00:14.1: reg 10: [io 0xf040-0xf047]
[ 0.575288] pci 0000:00:14.1: reg 14: [io 0xf030-0xf033]
[ 0.575295] pci 0000:00:14.1: reg 18: [io 0xf020-0xf027]
[ 0.575302] pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013]
[ 0.575309] pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f]
[ 0.575337] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.575353] pci 0000:00:14.2: reg 10: [mem 0xfe400000-0xfe403fff 64bit]
[ 0.575400] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.575412] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.575468] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.575499] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.575509] pci 0000:00:14.5: reg 10: [mem 0xfe406000-0xfe406fff]
[ 0.575559] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.575569] pci 0000:00:16.0: reg 10: [mem 0xfe405000-0xfe405fff]
[ 0.575621] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.575634] pci 0000:00:16.2: reg 10: [mem 0xfe404000-0xfe4040ff]
[ 0.575694] pci 0000:00:16.2: supports D1 D2
[ 0.575695] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.575712] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
[ 0.575729] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
[ 0.575742] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
[ 0.575755] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
[ 0.575772] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
[ 0.575784] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
[ 0.575830] pci 0000:01:00.0: [10de:0f00] type 0 class 0x000300
[ 0.575838] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.575847] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.575855] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.575861] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.575867] pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.575915] pci 0000:01:00.1: [10de:0bea] type 0 class 0x000403
[ 0.575923] pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff]
[ 0.580052] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.580055] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.580058] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.580061] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.580095] pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03
[ 0.580109] pci 0000:02:00.0: reg 10: [mem 0xfe300000-0xfe307fff 64bit]
[ 0.580173] pci 0000:02:00.0: supports D1 D2
[ 0.580174] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.588047] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.588051] pci 0000:00:04.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.588088] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.588100] pci 0000:03:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.588118] pci 0000:03:00.0: reg 18: [mem 0xd8004000-0xd8004fff 64bit pref]
[ 0.588130] pci 0000:03:00.0: reg 20: [mem 0xd8000000-0xd8003fff 64bit pref]
[ 0.588180] pci 0000:03:00.0: supports D1 D2
[ 0.588181] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.596047] pci 0000:00:09.0: PCI bridge to [bus 03-03]
[ 0.596051] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.596054] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.596089] pci 0000:04:00.0: [1b6f:7023] type 0 class 0x000c03
[ 0.596103] pci 0000:04:00.0: reg 10: [mem 0xfe200000-0xfe207fff 64bit]
[ 0.596167] pci 0000:04:00.0: supports D1 D2
[ 0.596168] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.604047] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[ 0.604051] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.604085] pci 0000:05:06.0: [4444:0803] type 0 class 0x000400
[ 0.604103] pci 0000:05:06.0: reg 10: [mem 0xd4000000-0xd7ffffff pref]
[ 0.604208] pci 0000:05:0e.0: [1106:3044] type 0 class 0x000c00
[ 0.604226] pci 0000:05:0e.0: reg 10: [mem 0xfe100000-0xfe1007ff]
[ 0.604236] pci 0000:05:0e.0: reg 14: [io 0xc000-0xc07f]
[ 0.604310] pci 0000:05:0e.0: supports D2
[ 0.604311] pci 0000:05:0e.0: PME# supported from D2 D3hot D3cold
[ 0.604340] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.604343] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.604346] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.604349] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd7ffffff pref]
[ 0.604351] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.604353] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.604355] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.604357] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.604358] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.604360] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.604362] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.604375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.604483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.604555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
[ 0.604580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
[ 0.604607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT]
[ 0.604633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT]
[ 0.604662] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.604665] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.604666] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.610078] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.610125] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.610174] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.610222] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.610260] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.610289] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.610317] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.610346] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.610407] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.610407] vgaarb: loaded
[ 0.610407] vgaarb: bridge control possible 0000:01:00.0
[ 0.610407] PCI: Using ACPI for IRQ routing
[ 0.616587] PCI: pci_cache_line_size set to 64 bytes
[ 0.616660] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.616662] reserve RAM buffer: 00000000beb80000 - 00000000bfffffff
[ 0.616664] reserve RAM buffer: 00000000bf858000 - 00000000bfffffff
[ 0.616665] reserve RAM buffer: 00000000bff00000 - 00000000bfffffff
[ 0.616667] reserve RAM buffer: 000000023f000000 - 000000023fffffff
[ 0.616743] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.616746] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.618781] Switching to clocksource hpet
[ 0.618790] pnp: PnP ACPI init
[ 0.618790] ACPI: bus type pnp registered
[ 0.618790] pnp 00:00: [bus 00-ff]
[ 0.618790] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.618790] pnp 00:00: [io 0x0000-0x03af window]
[ 0.618790] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 0.618790] pnp 00:00: [io 0x03b0-0x03df window]
[ 0.618790] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.618790] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.618790] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.618790] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[ 0.618790] pnp 00:00: [mem 0x00000000 window]
[ 0.618790] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.618790] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.618790] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.618790] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.618790] pnp 00:02: [io 0x040b]
[ 0.618790] pnp 00:02: [io 0x04d6]
[ 0.618790] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.618790] pnp 00:02: [io 0x0c14]
[ 0.618790] pnp 00:02: [io 0x0c50-0x0c51]
[ 0.618790] pnp 00:02: [io 0x0c52]
[ 0.618790] pnp 00:02: [io 0x0c6c]
[ 0.618790] pnp 00:02: [io 0x0c6f]
[ 0.618790] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.618790] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.618790] pnp 00:02: [io 0x0cd4-0x0cd5]
[ 0.618790] pnp 00:02: [io 0x0cd6-0x0cd7]
[ 0.618790] pnp 00:02: [io 0x0cd8-0x0cdf]
[ 0.618790] pnp 00:02: [io 0x0800-0x089f]
[ 0.618790] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.618790] pnp 00:02: [io 0x0000-0x000f]
[ 0.618790] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.618790] pnp 00:02: [io 0x0900-0x090f]
[ 0.618790] pnp 00:02: [io 0x0910-0x091f]
[ 0.618790] pnp 00:02: [io 0xfe00-0xfefe]
[ 0.618790] pnp 00:02: [io 0x0060-0x005f disabled]
[ 0.618790] pnp 00:02: [io 0x0064-0x0063 disabled]
[ 0.618790] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.618790] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 0.618790] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[ 0.618790] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[ 0.618790] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[ 0.618790] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[ 0.618790] pnp 00:02: [mem 0xffc00000-0xffffffff]
[ 0.618790] system 00:02: [io 0x040b] has been reserved
[ 0.618790] system 00:02: [io 0x04d6] has been reserved
[ 0.618790] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.618790] system 00:02: [io 0x0c14] has been reserved
[ 0.618790] system 00:02: [io 0x0c50-0x0c51] has been reserved
[ 0.618790] system 00:02: [io 0x0c52] has been reserved
[ 0.618790] system 00:02: [io 0x0c6c] has been reserved
[ 0.618790] system 00:02: [io 0x0c6f] has been reserved
[ 0.618790] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.618790] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.618790] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[ 0.618790] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[ 0.618790] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[ 0.618790] system 00:02: [io 0x0800-0x089f] has been reserved
[ 0.618790] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.618790] system 00:02: [io 0x0900-0x090f] has been reserved
[ 0.618790] system 00:02: [io 0x0910-0x091f] has been reserved
[ 0.618790] system 00:02: [io 0xfe00-0xfefe] has been reserved
[ 0.618790] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.618790] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.618790] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.618790] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.618790] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.618790] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.618790] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.618790] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.618790] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.618790] pnp 00:03: [io 0x0220-0x0227]
[ 0.618790] pnp 00:03: [io 0x0228-0x0237]
[ 0.618790] pnp 00:03: [io 0x0a20-0x0a2f]
[ 0.618790] system 00:03: [io 0x0220-0x0227] has been reserved
[ 0.618790] system 00:03: [io 0x0228-0x0237] has been reserved
[ 0.618790] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 0.618790] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.618790] pnp 00:04: [io 0x03f8-0x03ff]
[ 0.618790] pnp 00:04: [irq 4]
[ 0.618790] pnp 00:04: [dma 0 disabled]
[ 0.618790] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.618790] pnp 00:05: [dma 4]
[ 0.618790] pnp 00:05: [io 0x0000-0x000f]
[ 0.618790] pnp 00:05: [io 0x0081-0x0083]
[ 0.618790] pnp 00:05: [io 0x0087]
[ 0.618790] pnp 00:05: [io 0x0089-0x008b]
[ 0.618790] pnp 00:05: [io 0x008f]
[ 0.618790] pnp 00:05: [io 0x00c0-0x00df]
[ 0.618790] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.618790] pnp 00:06: [io 0x0070-0x0071]
[ 0.618790] pnp 00:06: [irq 8]
[ 0.618790] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.618790] pnp 00:07: [io 0x0061]
[ 0.618790] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.618790] pnp 00:08: [io 0x0010-0x001f]
[ 0.618790] pnp 00:08: [io 0x0022-0x003f]
[ 0.618790] pnp 00:08: [io 0x0044-0x005f]
[ 0.618790] pnp 00:08: [io 0x0062-0x0063]
[ 0.618790] pnp 00:08: [io 0x0065-0x006f]
[ 0.618790] pnp 00:08: [io 0x0072-0x007f]
[ 0.618790] pnp 00:08: [io 0x0080]
[ 0.618790] pnp 00:08: [io 0x0084-0x0086]
[ 0.618790] pnp 00:08: [io 0x0088]
[ 0.618790] pnp 00:08: [io 0x008c-0x008e]
[ 0.618790] pnp 00:08: [io 0x0090-0x009f]
[ 0.618790] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.618790] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.618790] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.618790] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.618790] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.618790] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.618790] pnp 00:09: [irq 13]
[ 0.618790] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.618790] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.618790] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.618790] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.618790] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.618790] pnp 00:0c: [mem 0xfec20000-0xfec200ff]
[ 0.618791] system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.618793] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.618886] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 0.618913] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.618915] pnp: PnP ACPI: found 14 devices
[ 0.618916] ACPI: ACPI bus type pnp unregistered
[ 0.625368] PCI: max bus depth: 1 pci_try_num: 2
[ 0.625385] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.625388] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.625390] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.625393] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.625396] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.625398] pci 0000:00:04.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.625402] pci 0000:00:09.0: PCI bridge to [bus 03-03]
[ 0.625404] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.625407] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.625410] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[ 0.625412] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.625416] pci 0000:00:14.4: PCI bridge to [bus 05-05]
[ 0.625418] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.625422] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.625425] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd7ffffff pref]
[ 0.625437] pci 0000:00:02.0: setting latency timer to 64
[ 0.625441] pci 0000:00:04.0: setting latency timer to 64
[ 0.625447] pci 0000:00:09.0: setting latency timer to 64
[ 0.625452] pci 0000:00:0a.0: setting latency timer to 64
[ 0.625458] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.625459] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.625461] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.625463] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.625464] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.625466] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.625467] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.625469] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.625471] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[ 0.625472] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.625474] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff]
[ 0.625475] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.625477] pci_bus 0000:03: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.625479] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe2fffff]
[ 0.625480] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.625482] pci_bus 0000:05: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.625483] pci_bus 0000:05: resource 2 [mem 0xd4000000-0xd7ffffff pref]
[ 0.625485] pci_bus 0000:05: resource 4 [io 0x0000-0x03af]
[ 0.625486] pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7]
[ 0.625487] pci_bus 0000:05: resource 6 [io 0x03b0-0x03df]
[ 0.625489] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff]
[ 0.625490] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.625492] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.625493] pci_bus 0000:05: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.625594] NET: Registered protocol family 2
[ 0.625767] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.626680] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.628214] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.628405] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.628406] TCP reno registered
[ 0.628416] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.628450] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.628578] NET: Registered protocol family 1
[ 0.956106] pci 0000:01:00.0: Boot video device
[ 0.956187] PCI: CLS 64 bytes, default 64
[ 0.956224] Unpacking initramfs...
[ 1.116403] Freeing initrd memory: 9976k freed
[ 1.118591] PCI-DMA: Disabling AGP.
[ 1.118660] PCI-DMA: aperture base @ f8000000 size 65536 KB
[ 1.118661] init_memory_mapping: 00000000f8000000-00000000fc000000
[ 1.118664] 00f8000000 - 00fc000000 page 2M
[ 1.118668] PCI-DMA: using GART IOMMU.
[ 1.118670] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.122828] perf: AMD IBS detected (0x000000ff)
[ 1.122991] audit: initializing netlink socket (disabled)
[ 1.123003] type=2000 audit(1369866823.116:1): initialized
[ 1.132950] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.133924] VFS: Disk quotas dquot_6.5.2
[ 1.133953] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.134007] msgmni has been set to 16077
[ 1.134175] alg: No test for stdrng (krng)
[ 1.134207] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.134209] io scheduler noop registered
[ 1.134210] io scheduler deadline registered
[ 1.134239] io scheduler cfq registered (default)
[ 1.134394] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.134407] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.134409] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.134656] ERST: Table is not found!
[ 1.134658] GHES: HEST is not enabled!
[ 1.134704] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.155038] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.352516] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.376245] Linux agpgart interface v0.103
[ 1.376336] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.376691] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.376697] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.376793] mousedev: PS/2 mouse device common for all mice
[ 1.376832] rtc_cmos 00:06: RTC can wake from S4
[ 1.376909] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.376929] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.376938] cpuidle: using governor ladder
[ 1.376939] cpuidle: using governor menu
[ 1.377087] TCP cubic registered
[ 1.377173] NET: Registered protocol family 10
[ 1.377525] Mobile IPv6
[ 1.377526] NET: Registered protocol family 17
[ 1.377529] Registering the dns_resolver key type
[ 1.377626] PM: Hibernation image not present or could not be loaded.
[ 1.377632] registered taskstats version 1
[ 1.378240] rtc_cmos 00:06: setting system clock to 2013-05-29 22:33:44 UTC (1369866824)
[ 1.378284] Initializing network drop monitor service
[ 1.379138] Freeing unused kernel memory: 576k freed
[ 1.379239] Write protecting the kernel read-only data: 6144k
[ 1.381062] Freeing unused kernel memory: 660k freed
[ 1.382976] Freeing unused kernel memory: 680k freed
[ 1.391382] udevd[66]: starting version 175
[ 1.401826] usbcore: registered new interface driver usbfs
[ 1.401850] usbcore: registered new interface driver hub
[ 1.405370] SCSI subsystem initialized
[ 1.405533] usbcore: registered new device driver usb
[ 1.406147] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 1.406151] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.406178] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 1.406266] xhci_hcd 0000:02:00.0: irq 44, io mem 0xfe300000
[ 1.406314] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[ 1.406364] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.406367] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.406369] usb usb1: Product: xHCI Host Controller
[ 1.406372] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.406374] usb usb1: SerialNumber: 0000:02:00.0
[ 1.407524] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.407554] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.408540] xHCI xhci_add_endpoint called for root hub
[ 1.408542] xHCI xhci_check_bandwidth called for root hub
[ 1.408573] hub 1-0:1.0: USB hub found
[ 1.408580] hub 1-0:1.0: 2 ports detected
[ 1.408649] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.408655] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.408672] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.408675] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.408677] usb usb2: Product: xHCI Host Controller
[ 1.408678] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.408680] usb usb2: SerialNumber: 0000:02:00.0
[ 1.409535] xHCI xhci_add_endpoint called for root hub
[ 1.409537] xHCI xhci_check_bandwidth called for root hub
[ 1.409564] hub 2-0:1.0: USB hub found
[ 1.409570] hub 2-0:1.0: 2 ports detected
[ 1.409623] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 1.409630] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.409651] QUIRK: Enable AMD PLL fix
[ 1.409660] ehci_hcd 0000:00:12.2: debug port 1
[ 1.409682] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe409000
[ 1.409843] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.409897] r8169 0000:03:00.0: setting latency timer to 64
[ 1.409954] r8169 0000:03:00.0: irq 73 for MSI/MSI-X
[ 1.410410] r8169 0000:03:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c6a000, 94:de:80:21:2a:5c, XID 0c900800 IRQ 73
[ 1.410413] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.413014] libata version 3.00 loaded.
[ 1.420056] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.420087] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.420090] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.420092] usb usb3: Product: EHCI Host Controller
[ 1.420094] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.420096] usb usb3: SerialNumber: 0000:00:12.2
[ 1.420240] hub 3-0:1.0: USB hub found
[ 1.420244] hub 3-0:1.0: 5 ports detected
[ 1.420359] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.420367] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.420373] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.420393] ehci_hcd 0000:00:13.2: debug port 1
[ 1.420405] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe407000
[ 1.424489] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.424509] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 1.424512] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.424521] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
[ 1.424603] xhci_hcd 0000:04:00.0: irq 47, io mem 0xfe200000
[ 1.424653] xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X
[ 1.424693] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.424696] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.424698] usb usb5: Product: xHCI Host Controller
[ 1.424699] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.424701] usb usb5: SerialNumber: 0000:04:00.0
[ 1.424853] xHCI xhci_add_endpoint called for root hub
[ 1.424855] xHCI xhci_check_bandwidth called for root hub
[ 1.424877] hub 5-0:1.0: USB hub found
[ 1.424882] hub 5-0:1.0: 2 ports detected
[ 1.425034] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.425039] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
[ 1.425055] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.425057] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.425059] usb usb6: Product: xHCI Host Controller
[ 1.425060] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.425062] usb usb6: SerialNumber: 0000:04:00.0
[ 1.425163] xHCI xhci_add_endpoint called for root hub
[ 1.425165] xHCI xhci_check_bandwidth called for root hub
[ 1.425203] hub 6-0:1.0: USB hub found
[ 1.425208] hub 6-0:1.0: 2 ports detected
[ 1.432053] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.432083] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.432086] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.432089] usb usb4: Product: EHCI Host Controller
[ 1.432090] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.432092] usb usb4: SerialNumber: 0000:00:13.2
[ 1.432176] hub 4-0:1.0: USB hub found
[ 1.432179] hub 4-0:1.0: 5 ports detected
[ 1.432271] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.432278] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 7
[ 1.432284] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.432303] ehci_hcd 0000:00:16.2: debug port 1
[ 1.432315] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe404000
[ 1.444065] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.444089] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.444096] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.444102] usb usb7: Product: EHCI Host Controller
[ 1.444104] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.444106] usb usb7: SerialNumber: 0000:00:16.2
[ 1.444202] hub 7-0:1.0: USB hub found
[ 1.444206] hub 7-0:1.0: 4 ports detected
[ 1.444294] ahci 0000:00:11.0: version 3.0
[ 1.444414] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.444418] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.445319] scsi0 : ahci
[ 1.446004] scsi1 : ahci
[ 1.446095] scsi2 : ahci
[ 1.446164] scsi3 : ahci
[ 1.446369] ata1: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19
[ 1.446372] ata2: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
[ 1.446375] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19
[ 1.446377] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
[ 1.446647] scsi4 : pata_atiixp
[ 1.446704] scsi5 : pata_atiixp
[ 1.447176] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.447178] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.447222] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.447232] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 8
[ 1.447254] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe40a000
[ 1.476096] firewire_ohci: Added fw-ohci device 0000:05:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 1.504043] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.504045] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.504047] usb usb8: Product: OHCI Host Controller
[ 1.504048] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 1.504049] usb usb8: SerialNumber: 0000:00:12.0
[ 1.504134] hub 8-0:1.0: USB hub found
[ 1.504139] hub 8-0:1.0: 5 ports detected
[ 1.504214] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.504221] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 9
[ 1.504233] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe408000
[ 1.564054] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.564057] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.564059] usb usb9: Product: OHCI Host Controller
[ 1.564060] usb usb9: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 1.564061] usb usb9: SerialNumber: 0000:00:13.0
[ 1.564145] hub 9-0:1.0: USB hub found
[ 1.564149] hub 9-0:1.0: 5 ports detected
[ 1.564212] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.564217] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 10
[ 1.564230] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe406000
[ 1.624036] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.624038] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.624040] usb usb10: Product: OHCI Host Controller
[ 1.624041] usb usb10: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 1.624043] usb usb10: SerialNumber: 0000:00:14.5
[ 1.624134] hub 10-0:1.0: USB hub found
[ 1.624139] hub 10-0:1.0: 2 ports detected
[ 1.624206] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.624211] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 11
[ 1.624225] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe405000
[ 1.684042] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.684044] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.684046] usb usb11: Product: OHCI Host Controller
[ 1.684047] usb usb11: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 1.684048] usb usb11: SerialNumber: 0000:00:16.0
[ 1.684133] hub 11-0:1.0: USB hub found
[ 1.684138] hub 11-0:1.0: 4 ports detected
[ 1.720056] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 1.764095] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.764119] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.770892] usb 1-1: New USB device found, idVendor=046d, idProduct=c31c
[ 1.770895] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.770897] usb 1-1: Product: USB Keyboard
[ 1.770898] usb 1-1: Manufacturer: Logitech
[ 1.770966] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.770969] usb 1-1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 1.820037] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-1/1-1:1.0/input/input0
[ 1.820084] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:02:00.0-1/input0
[ 1.855932] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-1/1-1:1.1/input/input1
[ 1.855980] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:02:00.0-1/input1
[ 1.855992] usbcore: registered new interface driver usbhid
[ 1.855994] usbhid: USB HID core driver
[ 1.900047] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[ 1.936022] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.936042] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.936675] ata1.00: ATA-8: ST2000DM001-1CH164, CC24, max UDMA/133
[ 1.936678] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.937269] ata1.00: configured for UDMA/133
[ 1.937388] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[ 1.939054] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[ 1.942875] ata2.00: configured for UDMA/100
[ 1.948858] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1.948860] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.948862] usb 1-2: Product: USB Optical Mouse
[ 1.948863] usb 1-2: Manufacturer: Logitech
[ 1.948930] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.951463] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5
[ 1.957478] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.957480] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.957559] sd 0:0:0:0: [sda] Write Protect is off
[ 1.957562] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.957594] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.961996] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input2
[ 1.962071] generic-usb 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 1.966383] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.966386] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.966489] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.976105] firewire_core: created device fw0: GUID 0049e55073f30a00, S400
[ 1.994368] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 1.994830] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.996294] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.996329] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.076063] usb 3-4: new high-speed USB device number 2 using ehci_hcd
[ 2.120046] Refined TSC clocksource calibration: 3516.062 MHz.
[ 2.120050] Switching to clocksource tsc
[ 2.188012] usb 3-4: device descriptor read/64, error -32
[ 2.404046] usb 3-4: device descriptor read/64, error -32
[ 2.620048] usb 3-4: new high-speed USB device number 3 using ehci_hcd
[ 2.732042] usb 3-4: device descriptor read/64, error -32
[ 2.948046] usb 3-4: device descriptor read/64, error -32
[ 3.164039] usb 3-4: new high-speed USB device number 4 using ehci_hcd
[ 3.311853] PM: Starting manual resume from disk
[ 3.311856] PM: Hibernation image partition 8:3 present
[ 3.311857] PM: Looking for hibernation image.
[ 3.312167] PM: Image not found (code -22)
[ 3.312169] PM: Hibernation image not present or could not be loaded.
[ 3.317623] EXT4-fs (sda8): INFO: recovery required on readonly filesystem
[ 3.317625] EXT4-fs (sda8): write access will be enabled during recovery
[ 3.366348] EXT4-fs (sda8): recovery complete
[ 3.366706] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 3.572039] usb 3-4: device not accepting address 4, error -32
[ 3.684043] usb 3-4: new high-speed USB device number 5 using ehci_hcd
[ 4.092041] usb 3-4: device not accepting address 5, error -32
[ 4.092101] hub 3-0:1.0: unable to enumerate USB device on port 4
[ 4.216049] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[ 4.239046] usb 5-2: New USB device found, idVendor=14f7, idProduct=0500
[ 4.239049] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.239050] usb 5-2: Product: TechniSat USB device
[ 4.239052] usb 5-2: Manufacturer: TechniSat Digital
[ 4.239053] usb 5-2: SerialNumber: 0008C9F0B0FC
[ 4.406772] udevd[415]: starting version 175
[ 4.494110] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 4.494115] ACPI: Power Button [PWRB]
[ 4.494152] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.494154] ACPI: Power Button [PWRF]
[ 4.589155] wmi: Mapper loaded
[ 4.612047] usb 9-3: new full-speed USB device number 2 using ohci_hcd
[ 4.622897] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.631596] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.639591] ACPI: acpi_idle registered with cpuidle
[ 4.657463] EDAC MC: Ver: 2.1.0
[ 4.660956] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.661195] SP5100 TCO timer: mmio address 0xbafe00 already in use
[ 4.663688] MCE: In-kernel MCE decoding enabled.
[ 4.664377] AMD64 EDAC driver v3.4.0
[ 4.664397] EDAC amd64: DRAM ECC disabled.
[ 4.664406] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.664407] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.664408] (Note that use of the override may cause unknown side effects.)
[ 4.711786] [drm] Initialized drm 1.1.0 20060810
[ 4.733351] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 4.762789] powernow-k8: Found 1 AMD FX(tm)-6300 Six-Core Processor (6 cpu cores) (version 2.20.00)
[ 4.762799] powernow-k8: Core Performance Boosting: on.
[ 4.762842] powernow-k8: 0 : pstate 0 (3500 MHz)
[ 4.762844] powernow-k8: 1 : pstate 1 (3000 MHz)
[ 4.762845] powernow-k8: 2 : pstate 2 (2500 MHz)
[ 4.762846] powernow-k8: 3 : pstate 3 (2000 MHz)
[ 4.762847] powernow-k8: 4 : pstate 4 (1400 MHz)
[ 4.772728] Linux media interface: v0.10
[ 4.950404] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.967863] Linux video capture interface: v2.00
[ 5.090983] ivtv: Start initialization, version 1.4.3
[ 5.091059] ivtv0: Initializing card 0
[ 5.091064] ivtv0: Autodetected Hauppauge card (cx23415 based)
[ 5.091195] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 5.105426] MXM: GUID detected in BIOS
[ 5.105893] nouveau 0000:01:00.0: setting latency timer to 64
[ 5.105928] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c1000a1)
[ 5.112728] hda_codec: ALC889: BIOS auto-probing.
[ 5.117494] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 5.122817] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 5.154114] tveeprom 1-0050: Hauppauge model 48134, rev J347, serial# 7110216
[ 5.154121] tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28)
[ 5.154127] tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
[ 5.154132] tveeprom 1-0050: audio processor is MSP4418 (idx 25)
[ 5.154136] tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
[ 5.154140] tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
[ 5.154144] ivtv0: Autodetected Hauppauge WinTV PVR-350
[ 5.185387] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 5.185393] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[ 5.185400] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 5.185405] [drm] nouveau 0000:01:00.0: Bios version 70.08.b6.00
[ 5.185411] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 5.185895] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 5.185902] [drm] nouveau 0000:01:00.0: DCB version 4.0
[ 5.185908] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000302 00020030
[ 5.185913] [drm] nouveau 0000:01:00.0: DCB outp 01: 02000300 00000000
[ 5.185918] [drm] nouveau 0000:01:00.0: DCB outp 02: 08011392 00020020
[ 5.185922] [drm] nouveau 0000:01:00.0: DCB outp 03: 04022310 00000000
[ 5.185926] [drm] nouveau 0000:01:00.0: DCB conn 00: 00001030
[ 5.185931] [drm] nouveau 0000:01:00.0: DCB conn 01: 00002161
[ 5.185935] [drm] nouveau 0000:01:00.0: DCB conn 02: 00000200
[ 5.185943] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x6BC7
[ 5.205972] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7223
[ 5.213016] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x84B8
[ 5.213021] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x84BC
[ 5.213074] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x85C3
[ 5.213079] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x8628
[ 5.232930] [drm] nouveau 0000:01:00.0: 0x6B2C: Condition still not met after 20ms, skipping following opcodes
[ 5.236138] [TTM] Zone kernel: Available graphics memory: 4116720 kiB
[ 5.236143] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 5.236147] [TTM] Initializing pool allocator
[ 5.236158] [TTM] Initializing DMA pool allocator
[ 5.236179] [drm] nouveau 0000:01:00.0: Detected 2048MiB VRAM (DDR3)
[ 5.256445] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 5.261189] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.261194] [drm] No driver support for vblank timestamp query.
[ 5.495833] saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
[ 5.580222] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 5.580226] [drm] nouveau 0000:01:00.0: 0: core 50MHz shader 101MHz memory 108MHz voltage 880mV
[ 5.580229] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 270MHz voltage 900mV
[ 5.580231] [drm] nouveau 0000:01:00.0: 3: core 810MHz shader 1620MHz memory 400MHz voltage 1100mV
[ 5.580234] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 324MHz voltage 900mV fanspeed 25%
[ 5.635409] saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
[ 5.685641] i2c-core: driver [msp3400] using legacy suspend method
[ 5.685650] i2c-core: driver [msp3400] using legacy resume method
[ 5.697662] msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
[ 5.697668] msp3400 1-0040: msp3400 supports nicam and radio, mode is autodetect and autoselect
[ 5.700413] i2c-core: driver [tuner] using legacy suspend method
[ 5.700418] i2c-core: driver [tuner] using legacy resume method
[ 5.705081] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[ 5.711445] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x1a0000, bo ffff880232789800
[ 5.711612] fbcon: nouveaufb (fb0) is primary device
[ 5.734620] tuner-simple 1-0061: creating new instance
[ 5.734626] tuner-simple 1-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
[ 5.740961] Console: switching to colour frame buffer device 240x67
[ 5.743519] fb0: nouveaufb frame buffer device
[ 5.743520] drm: registered panic notifier
[ 5.743524] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 5.743628] hda_intel: Disabling MSI
[ 5.743709] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 5.749194] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 5.749258] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 5.749321] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 5.749386] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 5.749448] ivtv0: Registered device radio0 for encoder radio
[ 5.749510] ivtv0: Registered device video16 for decoder MPG (1024 kB)
[ 5.749570] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
[ 5.749630] ivtv0: Registered device vbi16 for decoder VOUT
[ 5.749693] ivtv0: Registered device video48 for decoder YUV (1024 kB)
[ 5.749697] ivtv0: Initialized card: Hauppauge WinTV PVR-350
[ 5.749722] ivtv: End initialization
[ 6.401508] ivtv 0000:05:06.0: firmware: agent aborted loading v4l-cx2341x-enc.fw (not found?)
[ 6.401656] ivtv0: Retry loading firmware
[ 6.556085] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 6.588142] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 6.620142] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 6.652142] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 6.668282] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
[ 6.668443] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
[ 6.668580] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
[ 6.668718] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 7.027671] ivtv 0000:05:06.0: firmware: agent aborted loading v4l-cx2341x-enc.fw (not found?)
[ 7.027810] ivtv0: Failed to initialize on device video0
[ 7.027844] ivtv0: Failed to initialize on device video16
[ 7.027880] ivtv0: Failed to initialize on device vbi0
[ 7.027906] ivtv0: Failed to initialize on device video24
[ 7.027939] ivtv0: Failed to initialize on device vbi8
[ 7.027983] ivtv0: Failed to initialize on device vbi16
[ 7.028016] ivtv0: Failed to initialize on device radio0
[ 7.028167] ivtv0: Failed to initialize on device video48
[ 7.030891] ivtv0: Failed to initialize on device video32
[ 19.748157] usb 9-3: device descriptor read/64, error -110
[ 34.988164] usb 9-3: device descriptor read/64, error -110
[ 35.228120] usb 9-3: new full-speed USB device number 3 using ohci_hcd
[ 50.364100] usb 9-3: device descriptor read/64, error -110
[ 65.604156] usb 9-3: device descriptor read/64, error -110
[ 65.844161] usb 9-3: new full-speed USB device number 4 using ohci_hcd
[ 76.252146] usb 9-3: device not accepting address 4, error -110
[ 76.388128] usb 9-3: new full-speed USB device number 5 using ohci_hcd
[ 86.796144] usb 9-3: device not accepting address 5, error -110
[ 86.796176] hub 9-0:1.0: unable to enumerate USB device on port 3
[ 87.060109] usb 8-4: new full-speed USB device number 2 using ohci_hcd
[ 87.200035] usb 8-4: device descriptor read/64, error -32
[ 87.428204] Adding 7812084k swap on /dev/sda3. Priority:-1 extents:1 across:7812084k
[ 87.444043] usb 8-4: device descriptor read/64, error -32
[ 87.452488] EXT4-fs (sda8): re-mounted. Opts: (null)
[ 87.684097] usb 8-4: new full-speed USB device number 3 using ohci_hcd
[ 87.824065] usb 8-4: device descriptor read/64, error -32
[ 87.841586] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[ 87.931570] loop: module loaded
[ 88.068049] usb 8-4: device descriptor read/64, error -32
[ 88.308030] usb 8-4: new full-speed USB device number 4 using ohci_hcd
[ 88.716101] usb 8-4: device not accepting address 4, error -32
[ 88.852104] usb 8-4: new full-speed USB device number 5 using ohci_hcd
[ 89.260095] usb 8-4: device not accepting address 5, error -32
[ 89.260143] hub 8-0:1.0: unable to enumerate USB device on port 4
[ 89.260195] usb 1-2: USB disconnect, device number 3
[ 89.612163] usb 1-2: new low-speed USB device number 4 using xhci_hcd
[ 89.661139] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 89.661146] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 89.661151] usb 1-2: Product: USB Optical Mouse
[ 89.661155] usb 1-2: Manufacturer: Logitech
[ 89.661312] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 89.674410] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input11
[ 89.674655] generic-usb 0003:046D:C05A.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 90.404410] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 90.461260] kjournald starting. Commit interval 5 seconds
[ 90.461518] EXT3-fs (sda1): using internal journal
[ 90.461526] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 90.487721] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 90.557877] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 91.321383] r8169 0000:03:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory
[ 91.409227] r8169 0000:03:00.0: eth0: link down
[ 91.409274] r8169 0000:03:00.0: eth0: link down
[ 91.411074] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 92.964573] r8169 0000:03:00.0: eth0: link up
[ 92.966344] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 103.688083] eth0: no IPv6 routers present
[ 151.664547] usb 1-2: USB disconnect, device number 4
[ 153.164162] usb 1-2: new low-speed USB device number 5 using xhci_hcd
[ 153.212561] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 153.212569] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 153.212574] usb 1-2: Product: USB Optical Mouse
[ 153.212577] usb 1-2: Manufacturer: Logitech
[ 153.212802] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 153.225836] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input12
[ 153.226157] generic-usb 0003:046D:C05A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 213.391984] usb 1-2: USB disconnect, device number 5
[ 214.896162] usb 1-2: new low-speed USB device number 6 using xhci_hcd
[ 214.944994] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 214.945001] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 214.945006] usb 1-2: Product: USB Optical Mouse
[ 214.945010] usb 1-2: Manufacturer: Logitech
[ 214.945231] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 214.958264] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input13
[ 214.958559] generic-usb 0003:046D:C05A.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 275.111397] usb 1-2: USB disconnect, device number 6
[ 276.616161] usb 1-2: new low-speed USB device number 7 using xhci_hcd
[ 276.665417] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 276.665424] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 276.665429] usb 1-2: Product: USB Optical Mouse
[ 276.665433] usb 1-2: Manufacturer: Logitech
[ 276.665645] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 276.678684] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input14
[ 276.678979] generic-usb 0003:046D:C05A.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 336.830816] usb 1-2: USB disconnect, device number 7
[ 338.332161] usb 1-2: new low-speed USB device number 8 using xhci_hcd
[ 338.380836] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 338.380843] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 338.380848] usb 1-2: Product: USB Optical Mouse
[ 338.380852] usb 1-2: Manufacturer: Logitech
[ 338.381059] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 338.394101] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input15
[ 338.394340] generic-usb 0003:046D:C05A.0008: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 378.011917] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 665097
[ 378.012097] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 662975
[ 378.012224] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 662279
[ 378.012305] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 30
[ 378.012349] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 27
[ 378.012364] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 26
[ 378.012377] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 25
[ 378.012391] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 24
[ 378.012405] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 23
[ 378.012417] EXT4-fs (sda4): 9 orphan inodes deleted
[ 378.012421] EXT4-fs (sda4): recovery complete
[ 378.176763] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 398.422241] usb 1-2: USB disconnect, device number 8
[ 399.920160] usb 1-2: new low-speed USB device number 9 using xhci_hcd
[ 399.969250] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 399.969257] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 399.969262] usb 1-2: Product: USB Optical Mouse
[ 399.969266] usb 1-2: Manufacturer: Logitech
[ 399.969476] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 399.982524] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input16
[ 399.982767] generic-usb 0003:046D:C05A.0009: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 459.989647] usb 1-2: USB disconnect, device number 9
[ 461.488161] usb 1-2: new low-speed USB device number 10 using xhci_hcd
[ 461.536662] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 461.536670] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 461.536675] usb 1-2: Product: USB Optical Mouse
[ 461.536678] usb 1-2: Manufacturer: Logitech
[ 461.536896] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 461.549925] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input17
[ 461.550225] generic-usb 0003:046D:C05A.000A: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 521.693050] usb 1-2: USB disconnect, device number 10
[ 523.200160] usb 1-2: new low-speed USB device number 11 using xhci_hcd
[ 523.249069] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 523.249076] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 523.249081] usb 1-2: Product: USB Optical Mouse
[ 523.249085] usb 1-2: Manufacturer: Logitech
[ 523.249249] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 523.262337] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input18
[ 523.262634] generic-usb 0003:046D:C05A.000B: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 583.412463] usb 1-2: USB disconnect, device number 11
[ 584.912161] usb 1-2: new low-speed USB device number 12 using xhci_hcd
[ 584.961474] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 584.961481] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 584.961486] usb 1-2: Product: USB Optical Mouse
[ 584.961490] usb 1-2: Manufacturer: Logitech
[ 584.961693] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 584.974747] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input19
[ 584.975044] generic-usb 0003:046D:C05A.000C: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 645.131863] usb 1-2: USB disconnect, device number 12
[ 646.632161] usb 1-2: new low-speed USB device number 13 using xhci_hcd
[ 646.680877] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 646.680885] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 646.680890] usb 1-2: Product: USB Optical Mouse
[ 646.680893] usb 1-2: Manufacturer: Logitech
[ 646.681115] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 646.694141] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input20
[ 646.694416] generic-usb 0003:046D:C05A.000D: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 706.851265] usb 1-2: USB disconnect, device number 13
[ 708.352161] usb 1-2: new low-speed USB device number 14 using xhci_hcd
[ 708.401279] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 708.401287] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 708.401292] usb 1-2: Product: USB Optical Mouse
[ 708.401295] usb 1-2: Manufacturer: Logitech
[ 708.401520] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 708.414538] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input21
[ 708.414852] generic-usb 0003:046D:C05A.000E: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 768.546668] usb 1-2: USB disconnect, device number 14
[ 770.052162] usb 1-2: new low-speed USB device number 15 using xhci_hcd
[ 770.100681] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 770.100688] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 770.100694] usb 1-2: Product: USB Optical Mouse
[ 770.100697] usb 1-2: Manufacturer: Logitech
[ 770.100900] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 770.113982] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input22
[ 770.114305] generic-usb 0003:046D:C05A.000F: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 830.242070] usb 1-2: USB disconnect, device number 15
[ 831.740159] usb 1-2: new low-speed USB device number 16 using xhci_hcd
[ 831.789081] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 831.789088] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 831.789093] usb 1-2: Product: USB Optical Mouse
[ 831.789097] usb 1-2: Manufacturer: Logitech
[ 831.789314] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 831.802353] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input23
[ 831.802652] generic-usb 0003:046D:C05A.0010: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 891.921464] usb 1-2: USB disconnect, device number 16
[ 893.420160] usb 1-2: new low-speed USB device number 17 using xhci_hcd
[ 893.469481] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 893.469488] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 893.469493] usb 1-2: Product: USB Optical Mouse
[ 893.469496] usb 1-2: Manufacturer: Logitech
[ 893.469716] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 893.482748] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input24
[ 893.483059] generic-usb 0003:046D:C05A.0011: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 953.632866] usb 1-2: USB disconnect, device number 17
[ 955.132160] usb 1-2: new low-speed USB device number 18 using xhci_hcd
[ 955.180881] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 955.180888] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 955.180894] usb 1-2: Product: USB Optical Mouse
[ 955.180897] usb 1-2: Manufacturer: Logitech
[ 955.181102] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 955.194149] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input25
[ 955.194443] generic-usb 0003:046D:C05A.0012: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 1015.352253] usb 1-2: USB disconnect, device number 18
[ 1016.852161] usb 1-2: new low-speed USB device number 19 using xhci_hcd
[ 1016.901281] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1016.901288] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1016.901293] usb 1-2: Product: USB Optical Mouse
[ 1016.901296] usb 1-2: Manufacturer: Logitech
[ 1016.901454] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1016.914550] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input26
[ 1016.914848] generic-usb 0003:046D:C05A.0013: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 1077.071665] usb 1-2: USB disconnect, device number 19
[ 1078.572161] usb 1-2: new low-speed USB device number 20 using xhci_hcd
[ 1078.620679] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1078.620687] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1078.620692] usb 1-2: Product: USB Optical Mouse
[ 1078.620695] usb 1-2: Manufacturer: Logitech
[ 1078.620898] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1078.633943] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input27
[ 1078.634213] generic-usb 0003:046D:C05A.0014: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 1138.655062] usb 1-2: USB disconnect, device number 20
[ 1140.160160] usb 1-2: new low-speed USB device number 21 using xhci_hcd
[ 1140.209079] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1140.209086] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1140.209091] usb 1-2: Product: USB Optical Mouse
[ 1140.209095] usb 1-2: Manufacturer: Logitech
[ 1140.209303] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1140.222346] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input28
[ 1140.222652] generic-usb 0003:046D:C05A.0015: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 1200.374461] usb 1-2: USB disconnect, device number 21
[ 1201.876161] usb 1-2: new low-speed USB device number 22 using xhci_hcd
[ 1201.925477] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1201.925484] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1201.925489] usb 1-2: Product: USB Optical Mouse
[ 1201.925493] usb 1-2: Manufacturer: Logitech
[ 1201.925652] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1201.938736] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input29
[ 1201.939056] generic-usb 0003:046D:C05A.0016: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[ 1261.965859] usb 1-2: USB disconnect, device number 22
[ 1263.464166] usb 1-2: new low-speed USB device number 23 using xhci_hcd
[ 1263.512878] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1263.512885] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1263.512890] usb 1-2: Product: USB Optical Mouse
[ 1263.512894] usb 1-2: Manufacturer: Logitech
[ 1263.513059] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1263.526132] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input30
[ 1263.526433] generic-usb 0003:046D:C05A.0017: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
lsmod:
Module Size Used by
ext3 161867 1
jbd 56902 1 ext3
loop 22641 0
snd_hda_codec_hdmi 30824 4
tuner_simple 17175 1
tuner_types 16409 1 tuner_simple
tuner 17497 1
msp3400 30314 1
saa7127 13197 1
saa7115 17667 1
snd_hda_codec_realtek 188858 1
nouveau 587481 1
ivtv 129010 0
snd_hda_intel 26259 0
snd_hda_codec 78031 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
cx2341x 21461 1 ivtv
tveeprom 20593 1 ivtv
v4l2_common 13222 6 cx2341x,ivtv,saa7115,saa7127,msp3400,tuner
videodev 70889 7 v4l2_common,cx2341x,ivtv,saa7115,saa7127,msp3400,tuner
snd_hwdep 13186 1 snd_hda_codec
snd_pcm 68083 3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
snd_page_alloc 13003 2 snd_pcm,snd_hda_intel
snd_timer 22917 1 snd_pcm
v4l2_compat_ioctl32 16655 1 videodev
video 17683 1 nouveau
ttm 53664 1 nouveau
snd 52889 7 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
media 18148 1 videodev
powernow_k8 17618 0
mperf 12453 1 powernow_k8
crc32c_intel 12747 0
ghash_clmulni_intel 13173 0
aesni_intel 50667 0
drm_kms_helper 31370 1 nouveau
aes_x86_64 16843 1 aesni_intel
drm 183952 3 drm_kms_helper,ttm,nouveau
mxm_wmi 12515 1 nouveau
power_supply 13475 1 nouveau
edac_mce_amd 17103 0
sp5100_tco 12900 0
edac_core 35258 0
psmouse 64497 0
i2c_algo_bit 12841 2 ivtv,nouveau
evdev 17562 9
soundcore 13065 1 snd
processor 28157 7 powernow_k8
k10temp 12611 0
fam15h_power 12677 0
i2c_piix4 12536 0
i2c_core 23876 14 i2c_piix4,i2c_algo_bit,drm,drm_kms_helper,videodev,v4l2_common,tveeprom,ivtv,nouveau,saa7115,saa7127,msp3400,tuner,tuner_simple
joydev 17266 0
serio_raw 12931 0
pcspkr 12579 0
wmi 13243 2 mxm_wmi,nouveau
aes_generic 33026 2 aes_x86_64,aesni_intel
thermal_sys 18040 2 processor,video
button 12937 1 nouveau
cryptd 14517 2 aesni_intel,ghash_clmulni_intel
ext4 350602 5
crc16 12343 1 ext4
jbd2 62065 1 ext4
mbcache 13114 2 ext4,ext3
sg 25874 0
sr_mod 21899 0
cdrom 35401 1 sr_mod
sd_mod 36136 8
crc_t10dif 12348 1 sd_mod
ata_generic 12479 0
usbhid 36418 0
hid 81328 1 usbhid
ohci_hcd 26563 0
pata_atiixp 12736 0
firewire_ohci 35772 0
ahci 24997 7
libahci 22860 1 ahci
firewire_core 48449 1 firewire_ohci
crc_itu_t 12347 1 firewire_core
r8169 46972 0
mii 12675 1 r8169
ehci_hcd 40215 0
libata 140630 4 libahci,ahci,pata_atiixp,ata_generic
xhci_hcd 73434 0
scsi_mod 162269 4 libata,sd_mod,sr_mod,sg
usbcore 128741 5 xhci_hcd,ehci_hcd,ohci_hcd,usbhid
usb_common 12354 1 usbcore
lspci:
00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port B)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port D)
00:09.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port H)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx1 port A)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT 630] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
04:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
05:06.0 Multimedia video controller: Internext Compression Inc iTVC15 (CX23415) Video Decoder (rev 01)
05:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business
Bus 001 Device 023: ID 046d:c05a Logitech, Inc. Optical Mouse M90
Bus 005 Device 002: ID 14f7:0500 TechniSat Digital GmbH DVB-PC TV Star HD
Reply to: