Bug#700637: Installer fails to detect/install TP-Link TL-WDN4800 PCIe Atheros AR9380 Chipset
Package: installation-reports
Version: 2.11.3-4
I installed from a commercially purchased Debian 6.0.6 Installation
DVD i386 from LinuxCollections.com. Installation was successful,
although I have no Internet access to this machine as my only access
is via an iPhone 4 as a WiFi Hotspot. The installation did not
install 'wireless-tools' package, so I could only use 'ifconfig' to
check for any wireless activity. The 'lspci -knn' is included and the
following is it's output.
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:0150] (rev 09)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7752]
00:02.0 VGA compatible controller [0300]: Intel Corporation Device
[8086:0152] (rev 09)
Subsystem: Micro-Star International Co., Ltd. Device [1462:2111]
00:14.0 USB Controller [0c03]: Intel Corporation Device [8086:1e31] (rev 04)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7752]
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation Device
[8086:1e3a] (rev 04)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7752]
00:1a.0 USB Controller [0c03]: Intel Corporation Device [8086:1e2d] (rev 04)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7752]
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation Device [8086:1e20] (rev 04)
Subsystem: Micro-Star International Co., Ltd. Device [1462:d752]
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:1e10] (rev c4)
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation Device [8086:1e12] (rev c4)
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation Device [8086:1e16] (rev c4)
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation Device [8086:1e26] (rev 04)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7752]
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:1e44] (rev 04)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7752]
00:1f.2 SATA controller [0106]: Intel Corporation Device [8086:1e02] (rev 04)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7752]
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Device [8086:1e22] (rev 04)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7752]
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
06)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7752]
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Atheros Communications Inc. AR9300
Wireless LAN adaptor [168c:0030] (rev 01)
Subsystem: Atheros Communications Inc. Device [168c:3112]
The last entry is the network Wireless card that is not working. This
is a new install, when I tried previously, I attempted to load the
ath9k.ko module by hand as it was not loaded by the machine at
install. It still would not operate. I will append the 'dmesg'
output at the end as it is longer and I don't know what I'm looking
for. Following is the output of modprobe -l | grep ath
kernel/drivers/net/wireless/ath/ath5k/ath5k.ko
kernel/drivers/net/wireless/ath/ath9k/ath9k.ko
kernel/drivers/net/wireless/ath/ar9170/ar9170usb.ko
kernel/drivers/net/wireless/ath/ath.ko
kernel/drivers/md/multipath.ko
kernel/drivers/md/dm-multipath.ko
kernel/drivers/infiniband/hw/ipath/ib_ipath.ko
I do not understand why this module is loaded as the first 3 times I
installed off this disk it was not loaded. I suspect some other type
of bug may also be involved.
Below is the output of ifconfig
eth0 Link encap:Ethernet HWaddr d4:3d:7e:4d:e1:aa
inet addr:192.168.0.104 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::d63d:7eff:fe4d:e1aa/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:57 errors:0 dropped:0 overruns:0 frame:0
TX packets:61 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7069 (6.9 KiB) TX bytes:9516 (9.2 KiB)
Interrupt:27 Base address:0xe000
eth1 Link encap:Ethernet HWaddr 1a:9e:fc:89:fa:07
inet6 addr: fe80::189e:fcff:fe89:fa07/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:21 errors:21 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:4174 (4.0 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:560 (560.0 B) TX bytes:560 (560.0 B)
As you can see the WiFi card is not shown. I further attempted to
contact the TP-Link people for support on this card, knowing they
would have little to add. But recieved this reply, the second part is
my query. So I'm confident this is the chipset.
Re: TL-WDN4800: basic drivers from SupportWeb
WiFi
x
wireless
x
Grace Yang <grace.yang@tp-link.com>
Jan 9
to me, tracy.gan, calvin.zhong, denise.lei, douglas.zou, howard.he
Dear Jack,
Thank you very much for your email requesting information about our product.
This is Grace from TP-LINK technical support department.
Sorry that we have on driver for Linux operating system currently.
But the model is truly compatible with linux.
I can tell you the Chipset of this device, you may download a public
driver form internet to install it manually.
The Chipset is Atheros AR9380.
The driver is available at: http://linuxwireless.org/en/users/Drivers.
If you need any further help, please feel free to let me know.
To get technical support more quickly, please go to
http://www.tp-link.com/en/support/faq/
Best Regards
Grace Yang
Technical Support Engineer
TP-LINK TECHNOLOGIES CO.,LTD.
E-mail: grace.yang@tp-link.com
Website: http://www.tp-link.com/support/support.asp
From: jkwilborn
Date: 2013-01-09 22:41
To: support.usa
Subject: TL-WDN4800: basic drivers from SupportWeb
TP-LINK Customer Email Support Information
Your Name: Jack
E-mail Address: jkwilborn@gmail.com
Location (ISP): United States (English) (iPhone)
Product Category: Wireless
Model No: TL-WDN4800
Problem Category: Installation & Connecting Device
Operating System: Linux
Hardware Version: all
Firmware Version: cant locate
Phone No.: (623) 201-0220
Detailed Description of the Problem:
I purchased you TL-WDN4800 wireless PCI e card to use with my Debian
6.0.6 running on an Intel i5-3450 CPU as a way to connect to my iPhone
hot spot. I was assured that there were others that stated that they
installed this card and it came up with Linux, which is why I
purchased it. Do you have any information about Linux drivers for this
card?
Thanks for any help you can give me, as I am getting very frustrated.
Jack K. Wilborn
Supported Time: 1/9/2013 6:41:16 AM
Supported IP: 166.137.209.44
The hardware on my computer is 32 G of memory, an i5-3450 Intel CPU,
320 G Drive (Window 8), 500 G Drive (Debian Linux), there is also a
CD-ROM drive and another HD that has the reminisce of my Apple Mac G5
with OS X files on it. Internal card reader for items like SD and CF
cards which is connected internally to an unused USB port.
Externally there is an Apple iPhone 4, which give errors on boot
because it is connected to the USB port and Linux attempts to use it
with ipheth or something like that, but it has an unhandled condition
and also does not function properly, my next bug report, if I do this
one properly. A Logitec Keyboard and mouse along with an 8 G USB
memory card. I forgot to mention I have a USB connected JTAG that is
connected to a DreamPlug Plug Computer that is not powered up.
The following is the output of dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-46)
(dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun
Sep 23 11:00:33 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64
root=/dev/mapper/Debian-root ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000d8b70000 (usable)
[ 0.000000] BIOS-e820: 00000000d8b70000 - 00000000d926f000 (reserved)
[ 0.000000] BIOS-e820: 00000000d926f000 - 00000000d92fa000 (usable)
[ 0.000000] BIOS-e820: 00000000d92fa000 - 00000000d9398000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d9398000 - 00000000da5cc000 (reserved)
[ 0.000000] BIOS-e820: 00000000da5cc000 - 00000000da5cd000 (usable)
[ 0.000000] BIOS-e820: 00000000da5cd000 - 00000000da610000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da610000 - 00000000daa33000 (usable)
[ 0.000000] BIOS-e820: 00000000daa33000 - 00000000daff4000 (reserved)
[ 0.000000] BIOS-e820: 00000000daff4000 - 00000000db000000 (usable)
[ 0.000000] BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000081f600000 (usable)
[ 0.000000] DMI 2.7 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0x81f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 800000000 write-back
[ 0.000000] 1 base 800000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 5 base 81F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 81F600000 mask FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000db800000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000db000000
[ 0.000000] 0000000000 - 00db000000 page 2M
[ 0.000000] kernel direct mapping tables up to db000000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-000000081f600000
[ 0.000000] 0100000000 - 081f600000 page 2M
[ 0.000000] kernel direct mapping tables up to 81f600000 @ 13000-35000
[ 0.000000] RAMDISK: 176f1000 - 1803fe95
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000d9388078 0006C (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000d9391fb8 0010C (v05 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0
version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288)
[ 0.000000] ACPI: DSDT 00000000d9388178 09E3A (v02 ALASKA A M I
00000022 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000d9396080 00040
[ 0.000000] ACPI: APIC 00000000d93920c8 00072 (v03 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000d9392140 00044 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000d9392188 0003C (v01 ALASKA A M I
01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000d93921c8 007CA (v01 Intel_ AoacTabl
00001000 INTL 20091112)
[ 0.000000] ACPI: HPET 00000000d9392998 00038 (v01 ALASKA A M I
01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000d93929d0 0036D (v01 SataRe SataTabl
00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000d9392d40 009AA (v01 PmRef Cpu0Ist
00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000d93936f0 00A92 (v01 PmRef CpuPm
00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000081f600000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000081f600000
[ 0.000000] NODE_DATA [0000000000030000 - 0000000000037fff]
[ 0.000000] bootmap [0000000000100000 - 0000000000203ebf] pages 104
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 081f600000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00016d5584] TEXT DATA BSS ==>
[0001000000 - 00016d5584]
[ 0.000000] #3 [00176f1000 - 001803fe95] RAMDISK ==>
[00176f1000 - 001803fe95]
[ 0.000000] #4 [000009d800 - 0000100000] BIOS reserved ==>
[000009d800 - 0000100000]
[ 0.000000] #5 [00016d6000 - 00016d61ee] BRK ==>
[00016d6000 - 00016d61ee]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==>
[0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 0000030000] PGTABLE ==>
[0000013000 - 0000030000]
[ 0.000000] found SMP MP-table at [ffff8800000fd770] fd770
[ 0.000000] [ffffea0000000000-ffffea00163fffff] PMD ->
[ffff880001800000-ffff8800175fffff] on node 0
[ 0.000000] [ffffea0016400000-ffffea001c7fffff] PMD ->
[ffff880018200000-ffff88001e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0081f600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[9] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000d8b70
[ 0.000000] 0: 0x000d926f -> 0x000d92fa
[ 0.000000] 0: 0x000da5cc -> 0x000da5cd
[ 0.000000] 0: 0x000da610 -> 0x000daa33
[ 0.000000] 0: 0x000daff4 -> 0x000db000
[ 0.000000] 0: 0x00100000 -> 0x0081f600
[ 0.000000] On node 0 totalpages: 8356791
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 133 pages reserved
[ 0.000000] DMA zone: 3792 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 869986 pages, LIFO batch:31
[ 0.000000] Normal zone: 102109 pages used for memmap
[ 0.000000] Normal zone: 7366435 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000d8b70000 - 00000000d926f000
[ 0.000000] PM: Registered nosave memory: 00000000d92fa000 - 00000000d9398000
[ 0.000000] PM: Registered nosave memory: 00000000d9398000 - 00000000da5cc000
[ 0.000000] PM: Registered nosave memory: 00000000da5cd000 - 00000000da610000
[ 0.000000] PM: Registered nosave memory: 00000000daa33000 - 00000000daff4000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
[ 0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dfa00000 (gap:
dfa00000:18600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88001e800000 s90328
r8192 d24360 u524288
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 8240213
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64
root=/dev/mapper/Debian-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020200000 -
ffff880024200000
[ 0.000000] software IO TLB at phys 0x20200000 - 0x24200000
[ 0.000000] Memory: 32882840k/34068480k available (3068k kernel
code, 641316k absent, 544324k reserved, 2047k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3100.206 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated
using timer frequency.. 6200.41 BogoMIPS (lpj=12400824)
[ 0.000012] Security Framework initialized
[ 0.000015] SELinux: Disabled at boot.
[ 0.001538] Dentry cache hash table entries: 4194304 (order: 13,
33554432 bytes)
[ 0.007887] Inode-cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[ 0.010687] Mount-cache hash table entries: 256
[ 0.010761] Initializing cgroup subsys ns
[ 0.010763] Initializing cgroup subsys cpuacct
[ 0.010765] Initializing cgroup subsys devices
[ 0.010766] Initializing cgroup subsys freezer
[ 0.010767] Initializing cgroup subsys net_cls
[ 0.010781] CPU: Physical Processor ID: 0
[ 0.010782] CPU: Processor Core ID: 0
[ 0.010784] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010786] CPU: L2 cache: 256K
[ 0.010786] CPU: L3 cache: 6144K
[ 0.010788] CPU 0/0x0 -> Node 0
[ 0.010790] mce: CPU supports 9 MCE banks
[ 0.010800] CPU0: Thermal monitoring enabled (TM1)
[ 0.010801] CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.010808] using mwait in idle threads.
[ 0.010809] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.010812] ... version: 3
[ 0.010813] ... bit width: 48
[ 0.010814] ... generic registers: 8
[ 0.010815] ... value mask: 0000ffffffffffff
[ 0.010816] ... max period: 000000007fffffff
[ 0.010817] ... fixed-purpose events: 3
[ 0.010817] ... event mask: 00000007000000ff
[ 0.011505] ACPI: Core revision 20090903
[ 0.031099] Setting APIC routing to flat
[ 0.031427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071074] CPU0: Intel(R) Core(TM) i5-3450 CPU @ 3.10GHz stepping 09
[ 0.176285] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.186651] Initializing CPU#1
[ 0.264130] CPU: Physical Processor ID: 0
[ 0.264131] CPU: Processor Core ID: 1
[ 0.264133] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.264134] CPU: L2 cache: 256K
[ 0.264134] CPU: L3 cache: 6144K
[ 0.264136] CPU 1/0x2 -> Node 0
[ 0.264147] CPU1: Thermal monitoring enabled (TM1)
[ 0.264148] CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.264234] CPU1: Intel(R) Core(TM) i5-3450 CPU @ 3.10GHz stepping 09
[ 0.264239] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.284278] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.294499] Initializing CPU#2
[ 0.372020] CPU: Physical Processor ID: 0
[ 0.372021] CPU: Processor Core ID: 2
[ 0.372023] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.372024] CPU: L2 cache: 256K
[ 0.372025] CPU: L3 cache: 6144K
[ 0.372027] CPU 2/0x4 -> Node 0
[ 0.372038] CPU2: Thermal monitoring enabled (TM1)
[ 0.372039] CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.372127] CPU2: Intel(R) Core(TM) i5-3450 CPU @ 3.10GHz stepping 09
[ 0.372132] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.392172] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.402393] Initializing CPU#3
[ 0.479910] CPU: Physical Processor ID: 0
[ 0.479911] CPU: Processor Core ID: 3
[ 0.479913] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.479914] CPU: L2 cache: 256K
[ 0.479915] CPU: L3 cache: 6144K
[ 0.479916] CPU 3/0x6 -> Node 0
[ 0.479927] CPU3: Thermal monitoring enabled (TM1)
[ 0.479929] CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.480021] CPU3: Intel(R) Core(TM) i5-3450 CPU @ 3.10GHz stepping 09
[ 0.480026] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.500020] Brought up 4 CPUs
[ 0.500022] Total of 4 processors activated (24799.80 BogoMIPS).
[ 0.501626] CPU0 attaching sched-domain:
[ 0.501629] domain 0: span 0-3 level MC
[ 0.501630] groups: group ffff88001e80fbf0 cpus 0 group
ffff88001e88fbf0 cpus 1 group ffff88001e90fbf0 cpus 2 group
ffff88001e98fbf0 cpus 3
[ 0.501637] CPU1 attaching sched-domain:
[ 0.501638] domain 0: span 0-3 level MC
[ 0.501639] groups: group ffff88001e88fbf0 cpus 1 group
ffff88001e90fbf0 cpus 2 group ffff88001e98fbf0 cpus 3 group
ffff88001e80fbf0 cpus 0
[ 0.501643] CPU2 attaching sched-domain:
[ 0.501644] domain 0: span 0-3 level MC
[ 0.501645] groups: group ffff88001e90fbf0 cpus 2 group
ffff88001e98fbf0 cpus 3 group ffff88001e80fbf0 cpus 0 group
ffff88001e88fbf0 cpus 1
[ 0.501649] CPU3 attaching sched-domain:
[ 0.501650] domain 0: span 0-3 level MC
[ 0.501651] groups: group ffff88001e98fbf0 cpus 3 group
ffff88001e80fbf0 cpus 0 group ffff88001e88fbf0 cpus 1 group
ffff88001e90fbf0 cpus 2
[ 0.501777] devtmpfs: initialized
[ 0.504663] regulator: core version 0.5
[ 0.504689] NET: Registered protocol family 16
[ 0.504738] ACPI FADT declares the system doesn't support PCIe
ASPM, so disable it
[ 0.504739] ACPI: bus type pci registered
[ 0.504782] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.504783] PCI: MCFG area at f8000000 reserved in E820
[ 0.506513] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.506514] PCI: Using configuration type 1 for base access
[ 0.507635] bio: create slab <bio-0> at 0
[ 0.508261] ACPI: EC: Look up EC in DSDT
[ 0.509848] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.515424] ACPI: Interpreter enabled
[ 0.515426] ACPI: (supports S0 S3 S4 S5)
[ 0.515442] ACPI: Using IOAPIC for interrupt routing
[ 0.522537] ACPI: Power Resource [FN00] (off)
[ 0.522573] ACPI: Power Resource [FN01] (off)
[ 0.522608] ACPI: Power Resource [FN02] (off)
[ 0.522644] ACPI: Power Resource [FN03] (off)
[ 0.522679] ACPI: Power Resource [FN04] (off)
[ 0.522902] ACPI: No dock devices found.
[ 0.523452] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.523506] pci 0000:00:02.0: reg 10 64bit mmio: [0xf7800000-0xf7bfffff]
[ 0.523510] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.523513] pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f]
[ 0.523572] pci 0000:00:14.0: reg 10 64bit mmio: [0xf7e00000-0xf7e0ffff]
[ 0.523622] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.523625] pci 0000:00:14.0: PME# disabled
[ 0.523665] pci 0000:00:16.0: reg 10 64bit mmio: [0xf7e19000-0xf7e1900f]
[ 0.523720] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.523723] pci 0000:00:16.0: PME# disabled
[ 0.523771] pci 0000:00:1a.0: reg 10 32bit mmio: [0xf7e17000-0xf7e173ff]
[ 0.523835] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.523838] pci 0000:00:1a.0: PME# disabled
[ 0.523875] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7e10000-0xf7e13fff]
[ 0.523922] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.523925] pci 0000:00:1b.0: PME# disabled
[ 0.524000] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.524003] pci 0000:00:1c.0: PME# disabled
[ 0.524081] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.524084] pci 0000:00:1c.1: PME# disabled
[ 0.524162] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.524164] pci 0000:00:1c.3: PME# disabled
[ 0.524214] pci 0000:00:1d.0: reg 10 32bit mmio: [0xf7e16000-0xf7e163ff]
[ 0.524277] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.524281] pci 0000:00:1d.0: PME# disabled
[ 0.524410] pci 0000:00:1f.2: reg 10 io port: [0xf0b0-0xf0b7]
[ 0.524414] pci 0000:00:1f.2: reg 14 io port: [0xf0a0-0xf0a3]
[ 0.524418] pci 0000:00:1f.2: reg 18 io port: [0xf090-0xf097]
[ 0.524423] pci 0000:00:1f.2: reg 1c io port: [0xf080-0xf083]
[ 0.524427] pci 0000:00:1f.2: reg 20 io port: [0xf060-0xf07f]
[ 0.524431] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7e15000-0xf7e157ff]
[ 0.524468] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.524470] pci 0000:00:1f.2: PME# disabled
[ 0.524493] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7e14000-0xf7e140ff]
[ 0.524504] pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f]
[ 0.524608] pci 0000:02:00.0: reg 10 io port: [0xe000-0xe0ff]
[ 0.524630] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xf7d04000-0xf7d04fff]
[ 0.524645] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xf7d00000-0xf7d03fff]
[ 0.524727] pci 0000:02:00.0: supports D1 D2
[ 0.524728] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.524732] pci 0000:02:00.0: PME# disabled
[ 0.524802] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 0.524805] pci 0000:00:1c.1: bridge 32bit mmio: [0xf7d00000-0xf7dfffff]
[ 0.524864] pci 0000:03:00.0: reg 10 64bit mmio: [0xf7c00000-0xf7c1ffff]
[ 0.524899] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xf7c20000-0xf7c2ffff]
[ 0.524961] pci 0000:03:00.0: supports D1
[ 0.524962] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.524967] pci 0000:03:00.0: PME# disabled
[ 0.525032] pci 0000:00:1c.3: bridge 32bit mmio: [0xf7c00000-0xf7cfffff]
[ 0.525052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.525203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.525277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.525352] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.531697] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.531803] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.531911] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.532016] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.532120] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.532225] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.532330] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.532433] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.532495] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.532499] vgaarb: loaded
[ 0.532523] PCI: Using ACPI for IRQ routing
[ 0.532616] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.532620] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.534628] Switching to clocksource tsc
[ 0.535244] pnp: PnP ACPI init
[ 0.535249] ACPI: bus type pnp registered
[ 0.537477] pnp: PnP ACPI: found 14 devices
[ 0.537478] ACPI: ACPI bus type pnp unregistered
[ 0.537484] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.537488] system 00:05: ioport range 0x680-0x69f has been reserved
[ 0.537489] system 00:05: ioport range 0x1000-0x100f has been reserved
[ 0.537491] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 0.537492] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 0.537494] system 00:05: ioport range 0x400-0x453 has been reserved
[ 0.537495] system 00:05: ioport range 0x458-0x47f has been reserved
[ 0.537497] system 00:05: ioport range 0x500-0x57f has been reserved
[ 0.537498] system 00:05: ioport range 0x164e-0x164f has been reserved
[ 0.537501] system 00:07: ioport range 0x454-0x457 has been reserved
[ 0.537504] system 00:08: ioport range 0xa00-0xa0f has been reserved
[ 0.537507] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.537510] system 00:0c: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.537511] system 00:0c: iomem range 0xfed10000-0xfed17fff has been reserved
[ 0.537513] system 00:0c: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.537514] system 00:0c: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.537516] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.537518] system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.537519] system 00:0c: iomem range 0xfed90000-0xfed93fff has been reserved
[ 0.537521] system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.537522] system 00:0c: iomem range 0xff000000-0xffffffff has been reserved
[ 0.537524] system 00:0c: iomem range 0xfee00000-0xfeefffff could
not be reserved
[ 0.537527] system 00:0d: iomem range 0x20000000-0x201fffff has been reserved
[ 0.537528] system 00:0d: iomem range 0x40004000-0x40004fff has been reserved
[ 0.542120] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.542121] pci 0000:00:1c.0: IO window: disabled
[ 0.542125] pci 0000:00:1c.0: MEM window: disabled
[ 0.542128] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.542133] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.542135] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.542139] pci 0000:00:1c.1: MEM window: 0xf7d00000-0xf7dfffff
[ 0.542142] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.542147] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 0.542148] pci 0000:00:1c.3: IO window: disabled
[ 0.542152] pci 0000:00:1c.3: MEM window: 0xf7c00000-0xf7cfffff
[ 0.542155] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.542166] alloc irq_desc for 16 on node -1
[ 0.542167] alloc kstat_irqs on node -1
[ 0.542170] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.542174] pci 0000:00:1c.0: setting latency timer to 64
[ 0.542180] alloc irq_desc for 17 on node -1
[ 0.542181] alloc kstat_irqs on node -1
[ 0.542184] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.542187] pci 0000:00:1c.1: setting latency timer to 64
[ 0.542193] alloc irq_desc for 19 on node -1
[ 0.542194] alloc kstat_irqs on node -1
[ 0.542196] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.542199] pci 0000:00:1c.3: setting latency timer to 64
[ 0.542201] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.542203] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.542204] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.542206] pci_bus 0000:02: resource 1 mem: [0xf7d00000-0xf7dfffff]
[ 0.542207] pci_bus 0000:03: resource 1 mem: [0xf7c00000-0xf7cfffff]
[ 0.542222] NET: Registered protocol family 2
[ 0.542452] IP route cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.543107] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.544093] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.544208] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.544209] TCP reno registered
[ 0.544253] NET: Registered protocol family 1
[ 0.544264] pci 0000:00:02.0: Boot video device
[ 0.544273] pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.544300] pci 0000:00:14.0: PCI INT A disabled
[ 0.544308] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.544324] pci 0000:00:1a.0: PCI INT A disabled
[ 0.544334] alloc irq_desc for 23 on node -1
[ 0.544335] alloc kstat_irqs on node -1
[ 0.544339] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.544352] pci 0000:00:1d.0: PCI INT A disabled
[ 0.544382] Unpacking initramfs...
[ 0.675712] Freeing initrd memory: 9531k freed
[ 0.676722] audit: initializing netlink socket (disabled)
[ 0.676729] type=2000 audit(1360913665.517:1): initialized
[ 0.679741] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.680410] VFS: Disk quotas dquot_6.5.2
[ 0.680438] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.680482] msgmni has been set to 32768
[ 0.680590] alg: No test for stdrng (krng)
[ 0.680613] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.680615] io scheduler noop registered
[ 0.680616] io scheduler anticipatory registered
[ 0.680617] io scheduler deadline registered
[ 0.680643] io scheduler cfq registered (default)
[ 0.680718] alloc irq_desc for 24 on node -1
[ 0.680719] alloc kstat_irqs on node -1
[ 0.680728] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.680735] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.680821] alloc irq_desc for 25 on node -1
[ 0.680822] alloc kstat_irqs on node -1
[ 0.680827] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.680834] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.680918] alloc irq_desc for 26 on node -1
[ 0.680919] alloc kstat_irqs on node -1
[ 0.680924] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 0.680931] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.681699] Linux agpgart interface v0.103
[ 0.681718] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.681804] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.682019] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.682096] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 0.682128] PNP: No PS/2 controller found. Probing ports directly.
[ 0.682452] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.682455] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.682496] mice: PS/2 mouse device common for all mice
[ 0.682518] rtc_cmos 00:06: RTC can wake from S4
[ 0.682535] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.682560] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.682566] cpuidle: using governor ladder
[ 0.682567] cpuidle: using governor menu
[ 0.682569] No iBFT detected.
[ 0.682719] TCP cubic registered
[ 0.682771] NET: Registered protocol family 10
[ 0.683107] Mobile IPv6
[ 0.683109] NET: Registered protocol family 17
[ 0.683148] PM: Resume from disk failed.
[ 0.683153] registered taskstats version 1
[ 0.683434] rtc_cmos 00:06: setting system clock to 2013-02-15
07:34:26 UTC (1360913666)
[ 0.683477] Initalizing network drop monitor service
[ 0.683492] Freeing unused kernel memory: 592k freed
[ 0.683551] Write protecting the kernel read-only data: 4224k
[ 0.691553] udev[76]: starting version 164
[ 0.721204] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.721222] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.721269] r8169 0000:02:00.0: setting latency timer to 64
[ 0.721275] r8169 0000:02:00.0: (unregistered net_device): unknown
MAC, using family default
[ 0.721345] alloc irq_desc for 27 on node -1
[ 0.721346] alloc kstat_irqs on node -1
[ 0.721359] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[ 0.721650] r8169 0000:02:00.0: eth0: RTL8168b/8111b at
0xffffc9000307e000, d4:3d:7e:4d:e1:aa, XID 0c900800 IRQ 27
[ 0.728269] SCSI subsystem initialized
[ 0.729158] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.729163] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.729535] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.729539] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.731865] usbcore: registered new interface driver usbfs
[ 0.731878] usbcore: registered new interface driver hub
[ 0.734148] usbcore: registered new device driver usb
[ 0.735261] libata version 3.00 loaded.
[ 0.735690] xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.735710] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.735713] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.735726] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 1
[ 0.735816] xhci_hcd 0000:00:14.0: cache line size of 32 is not supported
[ 0.735828] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7e00000
[ 0.735851] usb usb1: config 1 interface 0 altsetting 0 endpoint
0x81 has no SuperSpeed companion descriptor
[ 0.735857] usb usb1: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.735858] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.735860] usb usb1: Product: xHCI Host Controller
[ 0.735861] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
[ 0.735862] usb usb1: SerialNumber: 0000:00:14.0
[ 0.735917] usb usb1: configuration #1 chosen from 1 choice
[ 0.735919] xHCI xhci_add_endpoint called for root hub
[ 0.735920] xHCI xhci_check_bandwidth called for root hub
[ 0.735950] hub 1-0:1.0: USB hub found
[ 0.735953] hub 1-0:1.0: 8 ports detected
[ 0.737199] ahci 0000:00:1f.2: version 3.0
[ 0.737208] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.737235] alloc irq_desc for 28 on node -1
[ 0.737237] alloc kstat_irqs on node -1
[ 0.737243] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 0.738052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.738447] fan PNP0C0B:00: registered as cooling_device0
[ 0.738451] ACPI: Fan [FAN0] (off)
[ 0.738526] fan PNP0C0B:01: registered as cooling_device1
[ 0.738529] ACPI: Fan [FAN1] (off)
[ 0.738606] fan PNP0C0B:02: registered as cooling_device2
[ 0.738608] ACPI: Fan [FAN2] (off)
[ 0.738683] fan PNP0C0B:03: registered as cooling_device3
[ 0.738685] ACPI: Fan [FAN3] (off)
[ 0.738758] fan PNP0C0B:04: registered as cooling_device4
[ 0.738761] ACPI: Fan [FAN4] (off)
[ 0.751783] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6
Gbps 0x27 impl SATA mode
[ 0.751786] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum
part ems apst
[ 0.751789] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.775764] scsi0 : ahci
[ 0.775823] scsi1 : ahci
[ 0.775852] scsi2 : ahci
[ 0.775878] scsi3 : ahci
[ 0.775905] scsi4 : ahci
[ 0.775932] scsi5 : ahci
[ 0.776148] ata1: SATA max UDMA/133 abar m2048@0xf7e15000 port
0xf7e15100 irq 28
[ 0.776150] ata2: SATA max UDMA/133 abar m2048@0xf7e15000 port
0xf7e15180 irq 28
[ 0.776152] ata3: SATA max UDMA/133 abar m2048@0xf7e15000 port
0xf7e15200 irq 28
[ 0.776153] ata4: DUMMY
[ 0.776154] ata5: DUMMY
[ 0.776156] ata6: SATA max UDMA/133 abar m2048@0xf7e15000 port
0xf7e15380 irq 28
[ 0.776173] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.776190] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.776192] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.776199] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 2
[ 0.776222] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.780089] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 0.780093] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7e17000
[ 0.795588] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.795604] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.795605] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.795607] usb usb2: Product: EHCI Host Controller
[ 0.795608] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.795609] usb usb2: SerialNumber: 0000:00:1a.0
[ 0.795645] usb usb2: configuration #1 chosen from 1 choice
[ 0.795662] hub 2-0:1.0: USB hub found
[ 0.795665] hub 2-0:1.0: 2 ports detected
[ 0.795690] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.795700] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.795702] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.795706] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 3
[ 0.795724] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.799601] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 0.799610] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7e16000
[ 0.811572] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.811586] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.811588] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.811589] usb usb3: Product: EHCI Host Controller
[ 0.811590] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.811591] usb usb3: SerialNumber: 0000:00:1d.0
[ 0.811621] usb usb3: configuration #1 chosen from 1 choice
[ 0.811634] hub 3-0:1.0: USB hub found
[ 0.811637] hub 3-0:1.0: 2 ports detected
[ 1.095419] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.098059] ata3.00: ACPI _SDD failed (AE 0x5)
[ 1.099415] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.101901] ata6.00: ACPI _SDD failed (AE 0x5)
[ 1.103410] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.103417] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.104195] ata2.00: ACPI _SDD failed (AE 0x5)
[ 1.104402] ata1.00: ACPI _SDD failed (AE 0x5)
[ 1.107398] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.242419] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.242421] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.242450] usb 2-1: configuration #1 chosen from 1 choice
[ 1.242557] hub 2-1:1.0: USB hub found
[ 1.242668] hub 2-1:1.0: 6 ports detected
[ 1.353926] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 1.486179] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.486181] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.486208] usb 3-1: configuration #1 chosen from 1 choice
[ 1.486326] hub 3-1:1.0: USB hub found
[ 1.486430] hub 3-1:1.0: 8 ports detected
[ 1.561859] usb 2-1.2: new low speed USB device using ehci_hcd and address 3
[ 1.658764] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c408
[ 1.658765] usb 2-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.658767] usb 2-1.2: Product: USB Trackball
[ 1.658768] usb 2-1.2: Manufacturer: Logitech
[ 1.658795] usb 2-1.2: configuration #1 chosen from 1 choice
[ 1.729697] usb 2-1.4: new high speed USB device using ehci_hcd and address 4
[ 1.823602] usb 2-1.4: New USB device found, idVendor=058f, idProduct=6366
[ 1.823603] usb 2-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.823604] usb 2-1.4: Product: Mass Storage Device
[ 1.823605] usb 2-1.4: Manufacturer: Generic
[ 1.823606] usb 2-1.4: SerialNumber: 058F0O1111B1
[ 1.823634] usb 2-1.4: configuration #1 chosen from 1 choice
[ 1.893535] usb 3-1.3: new full speed USB device using ehci_hcd and address 3
[ 1.992311] usb 3-1.3: New USB device found, idVendor=9e88, idProduct=9e8f
[ 1.992312] usb 3-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.992313] usb 3-1.3: Product: SheevaPlug JTAGKey FT2232D B
[ 1.992315] usb 3-1.3: Manufacturer: FTDI
[ 1.992316] usb 3-1.3: SerialNumber: FTVTU2CE
[ 1.992342] usb 3-1.3: configuration #1 chosen from 1 choice
[ 2.069364] usb 3-1.4: new high speed USB device using ehci_hcd and address 4
[ 2.163019] usb 3-1.4: New USB device found, idVendor=05ac, idProduct=1297
[ 2.163021] usb 3-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.163022] usb 3-1.4: Product: iPhone
[ 2.163023] usb 3-1.4: Manufacturer: Apple Inc.
[ 2.163024] usb 3-1.4: SerialNumber: 7cf54b4a981c9fbd45dde40f858c037c5c3389ca
[ 2.163058] usb 3-1.4: configuration #1 chosen from 4 choices
[ 2.237200] usb 3-1.5: new high speed USB device using ehci_hcd and address 5
[ 2.326359] usb 3-1.5: New USB device found, idVendor=154b, idProduct=005d
[ 2.326361] usb 3-1.5: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.326362] usb 3-1.5: Product: USB 2.0 FD
[ 2.326363] usb 3-1.5: Manufacturer: PNY
[ 2.326364] usb 3-1.5: SerialNumber: 7071BCF2201BACC0F2CF01A0
[ 2.326397] usb 3-1.5: configuration #1 chosen from 1 choice
[ 2.329615] Initializing USB Mass Storage driver...
[ 2.329662] scsi6 : SCSI emulation for USB Mass Storage devices
[ 2.329696] usb-storage: device found at 4
[ 2.329697] usb-storage: waiting for device to settle before scanning
[ 2.329728] scsi7 : SCSI emulation for USB Mass Storage devices
[ 2.329758] usb-storage: device found at 5
[ 2.329759] usb-storage: waiting for device to settle before scanning
[ 2.329764] usbcore: registered new interface driver usb-storage
[ 2.329765] USB Mass Storage support registered.
[ 2.397044] usb 3-1.6: new low speed USB device using ehci_hcd and address 6
[ 2.495569] usb 3-1.6: New USB device found, idVendor=046d, idProduct=c315
[ 2.495571] usb 3-1.6: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.495572] usb 3-1.6: Product: Logitech USB Keyboard
[ 2.495573] usb 3-1.6: Manufacturer: Logitech
[ 2.495602] usb 3-1.6: configuration #1 chosen from 1 choice
[ 6.413322] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.415975] ata3.00: ACPI _SDD failed (AE 0x5)
[ 6.415976] ata3.00: ACPI: failed the second time, disabled
[ 6.416142] ata3.00: ATA-6: ST3160023AS, 3.05, max UDMA/133
[ 6.416143] ata3.00: 312581808 sectors, multi 16: LBA48
[ 6.417318] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.419218] ata3.00: configured for UDMA/133
[ 6.419786] ata6.00: ACPI _SDD failed (AE 0x5)
[ 6.419787] ata6.00: ACPI: failed the second time, disabled
[ 6.419788] ata6.00: ATAPI: ATAPI DVD A DH24ABS, AX13, max UDMA/100
[ 6.420605] ata6.00: configured for UDMA/100
[ 6.429306] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.429318] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.430063] ata2.00: ACPI _SDD failed (AE 0x5)
[ 6.430064] ata2.00: ACPI: failed the second time, disabled
[ 6.430285] ata1.00: ACPI _SDD failed (AE 0x5)
[ 6.430286] ata1.00: ACPI: failed the second time, disabled
[ 6.430542] ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[ 6.430543] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 6.432066] ata1.00: configured for UDMA/133
[ 6.445347] scsi 0:0:0:0: Direct-Access ATA
ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[ 6.488439] ata2.00: ATA-7: ST3320820SCE, 3.ACE, max UDMA/133
[ 6.488441] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 6.546696] ata2.00: configured for UDMA/133
[ 6.561224] scsi 1:0:0:0: Direct-Access ATA ST3320820SCE
3.AC PQ: 0 ANSI: 5
[ 6.561311] scsi 2:0:0:0: Direct-Access ATA ST3160023AS
3.05 PQ: 0 ANSI: 5
[ 6.564760] scsi 5:0:0:0: CD-ROM ATAPI DVD A DH24ABS
AX13 PQ: 0 ANSI: 5
[ 6.566233] usbcore: registered new interface driver hiddev
[ 6.568345] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks:
(320 GB/298 GiB)
[ 6.568347] sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks:
(160 GB/149 GiB)
[ 6.568356] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks:
(500 GB/465 GiB)
[ 6.568357] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 6.568372] sd 2:0:0:0: [sdc] Write Protect is off
[ 6.568374] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.568384] sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.568446] sdc:
[ 6.568458] sd 0:0:0:0: [sda] Write Protect is off
[ 6.568460] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.568465] sd 1:0:0:0: [sdb] Write Protect is off
[ 6.568467] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.568481] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.568512] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.568588] sdb:
[ 6.568612] sda:
[ 6.569044] input: Logitech USB Trackball as
/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1
[ 6.569075] generic-usb 0003:046D:C408.0001: input,hidraw0: USB HID
v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1a.0-1.2/input0
[ 6.571114] [mac] sdc1 sdc2 sdc3
[ 6.571280] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 6.571917] input: Logitech Logitech USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input2
[ 6.571945] generic-usb 0003:046D:C315.0002: input,hidraw1: USB HID
v1.10 Keyboard [Logitech Logitech USB Keyboard] on
usb-0000:00:1d.0-1.6/input0
[ 6.571955] usbcore: registered new interface driver usbhid
[ 6.571956] usbhid: v2.6:USB HID core driver
[ 6.572828] sda1 sda2 <sr0: scsi3-mmc drive: 48x/48x writer
dvd-ram cd/rw xa/form2 cdda tray
[ 6.575368] Uniform CD-ROM driver Revision: 3.20
[ 6.575406] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 6.577151] sda5 >
[ 6.577312] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.602670] sdb1 sdb2
[ 6.602806] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 6.604664] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.604679] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.604698] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6.604711] sr 5:0:0:0: Attached scsi generic sg3 type 5
[ 6.958229] device-mapper: uevent: version 1.0.3
[ 6.958285] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@redhat.com
[ 7.203905] PM: Starting manual resume from disk
[ 7.203907] PM: Resume from partition 254:1
[ 7.203908] PM: Checking hibernation image.
[ 7.204056] PM: Error -22 checking image file
[ 7.204057] PM: Resume from disk failed.
[ 7.244107] kjournald starting. Commit interval 5 seconds
[ 7.244110] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.326237] usb-storage: device scan complete
[ 7.326244] usb-storage: device scan complete
[ 7.326860] scsi 6:0:0:0: Direct-Access Multi Flash Reader
1.00 PQ: 0 ANSI: 0
[ 7.327073] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 7.328473] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 7.330852] scsi 7:0:0:0: Direct-Access pny USB 2.0 FD
1.00 PQ: 0 ANSI: 4
[ 7.331048] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 7.332846] sd 7:0:0:0: [sde] 15667200 512-byte logical blocks:
(8.02 GB/7.47 GiB)
[ 7.334716] sd 7:0:0:0: [sde] Write Protect is off
[ 7.334718] sd 7:0:0:0: [sde] Mode Sense: 2f 00 00 00
[ 7.334719] sd 7:0:0:0: [sde] Assuming drive cache: write through
[ 7.339336] sd 7:0:0:0: [sde] Assuming drive cache: write through
[ 7.339377] sde: sde1
[ 7.344082] sd 7:0:0:0: [sde] Assuming drive cache: write through
[ 7.344123] sd 7:0:0:0: [sde] Attached SCSI removable disk
[ 8.372549] udev[581]: starting version 164
[ 8.964045] ACPI: SSDT 00000000d921c018 0083B (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 8.964290] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 8.964297] ACPI: Power Button [PWRB]
[ 8.964458] Monitor-Mwait will be used to enter C-1 state
[ 8.964472] Monitor-Mwait will be used to enter C-3 state
[ 8.964516] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.964520] processor LNXCPU:00: registered as cooling_device5
[ 8.964556] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 8.964559] ACPI: Power Button [PWRF]
[ 8.966332] usbcore: registered new interface driver usbserial
[ 8.966339] USB Serial support registered for generic
[ 8.966361] usbcore: registered new interface driver usbserial_generic
[ 8.966362] usbserial: USB Serial Driver core
[ 8.966920] ACPI: SSDT 00000000d921da98 00303 (v01 PmRef ApIst
00003000 INTL 20051117)
[ 8.967221] ACPI: SSDT 00000000d921ec18 00119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 8.967646] processor LNXCPU:01: registered as cooling_device6
[ 8.968191] processor LNXCPU:02: registered as cooling_device7
[ 8.968724] processor LNXCPU:03: registered as cooling_device8
[ 9.139671] ACPI: WMI: Mapper loaded
[ 9.646471] USB Serial support registered for FTDI USB Serial Device
[ 9.646521] usb 3-1.3: Ignoring serial port reserved for JTAG
[ 9.646541] ftdi_sio 3-1.3:1.1: FTDI USB Serial Device converter detected
[ 9.646556] usb 3-1.3: Detected FT2232C
[ 9.646557] usb 3-1.3: Number of endpoints 2
[ 9.646558] usb 3-1.3: Endpoint 1 MaxPacketSize 64
[ 9.646559] usb 3-1.3: Endpoint 2 MaxPacketSize 64
[ 9.646560] usb 3-1.3: Setting MaxPacketSize 64
[ 9.646736] usb 3-1.3: FTDI USB Serial Device converter now
attached to ttyUSB0
[ 9.646765] usbcore: registered new interface driver ftdi_sio
[ 9.646766] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 10.008572] ipheth 3-1.4:4.2: Apple iPhone USB Ethernet device attached
[ 10.008583] usbcore: registered new interface driver ipheth
[ 10.936799] EXT3 FS on dm-0, internal journal
[ 11.115138] loop: module loaded
[ 11.434220] Adding 6877176k swap on /dev/mapper/Debian-swap_1.
Priority:-1 extents:1 across:6877176k
[ 12.616204] fuse init (API version 7.13)
[ 15.217931] r8169 0000:02:00.0: eth0: link down
[ 15.217939] r8169 0000:02:00.0: eth0: link down
[ 15.219494] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.495056] lp: driver loaded but no devices found
[ 16.503195] ppdev: user-space parallel port driver
[ 16.565326] Bluetooth: Core ver 2.15
[ 16.565393] NET: Registered protocol family 31
[ 16.565395] Bluetooth: HCI device and connection manager initialized
[ 16.565398] Bluetooth: HCI socket layer initialized
[ 16.614722] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[ 16.614753] parport0: irq 7 detected
[ 16.646336] Bluetooth: L2CAP ver 2.14
[ 16.646338] Bluetooth: L2CAP socket layer initialized
[ 16.673446] Bluetooth: RFCOMM TTY layer initialized
[ 16.673450] Bluetooth: RFCOMM socket layer initialized
[ 16.673452] Bluetooth: RFCOMM ver 1.11
[ 16.708602] lp0: using parport0 (polling).
[ 16.754440] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.754444] Bluetooth: BNEP filters: protocol multicast
[ 16.802812] Bridge firewalling registered
[ 17.112830] r8169 0000:02:00.0: eth0: link up
[ 17.114390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.154266] Bluetooth: SCO (Voice Link) ver 0.6
[ 17.154269] Bluetooth: SCO socket layer initialized
[ 20.956069] ------------[ cut here ]------------
[ 20.956076] WARNING: at
/build/buildd-linux-2.6_2.6.32-46-i386-7ZiQaK/linux-2.6-2.6.32/debian/build/source_i386_none/net/sched/sch_generic.c:261
dev_watchdog+0xd2/0x16f()
[ 20.956078] Hardware name: MS-7752
[ 20.956079] NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out
[ 20.956080] Modules linked in: sco bridge stp bnep rfcomm l2cap
crc16 parport_pc bluetooth ppdev rfkill lp parport acpi_cpufreq
cpufreq_userspace cpufreq_powersave cpufreq_conservative cpufreq_stats
binfmt_misc fuse ext2 loop ipheth video output ftdi_sio wmi evdev
psmouse usbserial pcspkr button processor serio_raw ext3 jbd mbcache
dm_mod sg sr_mod sd_mod crc_t10dif cdrom usbhid hid usb_storage fan
ehci_hcd ahci xhci libata thermal scsi_mod thermal_sys r8169 mii
usbcore nls_base [last unloaded: scsi_wait_scan]
[ 20.956105] Pid: 2079, comm: gnome-settings- Not tainted 2.6.32-5-amd64 #1
[ 20.956106] Call Trace:
[ 20.956107] <IRQ> [<ffffffff812607bb>] ? dev_watchdog+0xd2/0x16f
[ 20.956111] [<ffffffff812607bb>] ? dev_watchdog+0xd2/0x16f
[ 20.956114] [<ffffffff8104de34>] ? warn_slowpath_common+0x77/0xa3
[ 20.956116] [<ffffffff812606e9>] ? dev_watchdog+0x0/0x16f
[ 20.956118] [<ffffffff8104debc>] ? warn_slowpath_fmt+0x51/0x59
[ 20.956121] [<ffffffff81064d97>] ? autoremove_wake_function+0x9/0x2e
[ 20.956123] [<ffffffff812606bd>] ? netif_tx_lock+0x3d/0x69
[ 20.956126] [<ffffffff8124b614>] ? netdev_drivername+0x3b/0x40
[ 20.956127] [<ffffffff812607bb>] ? dev_watchdog+0xd2/0x16f
[ 20.956130] [<ffffffff8103f985>] ? __wake_up+0x30/0x44
[ 20.956132] [<ffffffff81061d6c>] ? __queue_work+0x22/0x32
[ 20.956135] [<ffffffff8105a4c7>] ? run_timer_softirq+0x1c9/0x268
[ 20.956137] [<ffffffff81053c4b>] ? __do_softirq+0xdd/0x1a6
[ 20.956140] [<ffffffff8102455a>] ? lapic_next_event+0x18/0x1d
[ 20.956143] [<ffffffff81011cac>] ? call_softirq+0x1c/0x30
[ 20.956145] [<ffffffff8101322b>] ? do_softirq+0x3f/0x7c
[ 20.956146] [<ffffffff81053abb>] ? irq_exit+0x36/0x76
[ 20.956148] [<ffffffff81025028>] ? smp_apic_timer_interrupt+0x87/0x95
[ 20.956150] [<ffffffff81011673>] ? apic_timer_interrupt+0x13/0x20
[ 20.956151] <EOI> [<ffffffff810cb55a>] ? unmap_vmas+0x618/0x931
[ 20.956156] [<ffffffff810cb557>] ? unmap_vmas+0x615/0x931
[ 20.956159] [<ffffffff810bba83>] ? release_pages+0x17b/0x18d
[ 20.956161] [<ffffffff810d01ab>] ? __vma_link+0x5f/0x68
[ 20.956163] [<ffffffff810cfabe>] ? unmap_region+0xb2/0x132
[ 20.956164] [<ffffffff810d0c6d>] ? do_munmap+0x2bb/0x329
[ 20.956166] [<ffffffff810d0d1b>] ? sys_munmap+0x40/0x5a
[ 20.956169] [<ffffffff81037160>] ? sysenter_dispatch+0x7/0x2e
[ 20.956170] ---[ end trace e292f07f3b0f1319 ]---
[ 20.956172] ipheth: ipheth_tx_timeout: TX timeout
[ 26.019459] eth1: no IPv6 routers present
[ 30.946979] ipheth: ipheth_tx_timeout: TX timeout
[ 40.068378] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 40.937879] ipheth: ipheth_tx_timeout: TX timeout
[ 50.928774] ipheth: ipheth_tx_timeout: TX timeout
[ 60.919681] ipheth: ipheth_tx_timeout: TX timeout
[ 70.910584] ipheth: ipheth_tx_timeout: TX timeout
[ 80.901481] ipheth: ipheth_tx_timeout: TX timeout
[ 90.892386] ipheth: ipheth_tx_timeout: TX timeout
[ 100.883286] ipheth: ipheth_tx_timeout: TX timeout
[ 110.874186] ipheth: ipheth_tx_timeout: TX timeout
[ 120.865088] ipheth: ipheth_tx_timeout: TX timeout
[ 130.855988] ipheth: ipheth_tx_timeout: TX timeout
[ 140.846889] ipheth: ipheth_tx_timeout: TX timeout
[ 150.837790] ipheth: ipheth_tx_timeout: TX timeout
[ 160.828691] ipheth: ipheth_tx_timeout: TX timeout
[ 170.819594] ipheth: ipheth_tx_timeout: TX timeout
[ 180.810491] ipheth: ipheth_tx_timeout: TX timeout
[ 190.801395] ipheth: ipheth_tx_timeout: TX timeout
[ 200.796292] ipheth: ipheth_tx_timeout: TX timeout
[ 210.783197] ipheth: ipheth_tx_timeout: TX timeout
[ 220.774100] ipheth: ipheth_tx_timeout: TX timeout
I have found, what I consider conflicting information about this card.
On the Debian site for ath9k drivers
(http://linuxwireless.org/en/users/Drivers/ath9k) they state there is
some way to "Enabling ath9k", which I don't understand and seems that
it includes building the kernel on your machine. They also mention
using the supplied kernel to do something like it, using the 'proc'
command. I find this in man, but it's not on my machine. I have also
found this at another page in Debian stating that the chipset is
support, as Grace from TP-Link stated. The sam page as the driver
above, about half way down under 'supported chipsets' and AR9003 the
AR9380 is there, but I'm confused as to the terminology. I am running
(via uname -r) 2.6.32-5-amd64, they specify something like >= 2.6.36?
Thanks for all the help and looking over this stuff. I understand the
time you must spend and hope there is something you can do for me. My
contact info is
Jack Wilborn
jkwilborn@gmail.com
Thanks
Jack
Reply to: