[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#692475: (no subject)

Hi,

I forgot some information.
It is inserted in the correct place.
The system was correctly installed with the beta3 d-i (regression confirmation?) 

Best regards,
Florent
On Tue, Nov 6, 2012 at 4:38 PM, Florent Bories <florent.bories@gmail.com> wrote: 
Package: installation-reports

Boot method: The installator was boot from a USB stick
Image version: Weekly amd64 build CD
Date: 5 november 2012 - 15h30 GMT+2

Machine: Dell Precision T1650
Processor: Intel Xeon
Memory: 16 GB RAM, 2*1TB SATA Disk
Partitions: Installation didn't finish

Résultat de lspci -knn (ou lspci -nn) :


00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/Ivy
Bridge DRAM Controller [8086:0158] (rev 09)
    Subsystem: Dell Device [1028:053a]
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen
Core processor PCI Express Root Port [8086:0151] (rev 09)
    Kernel driver in use: pcieport
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
    Subsystem: Dell Device [1028:053a]
    Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7
Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev
04)
    Subsystem: Dell Device [1028:053a]
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit
Network Connection [8086:1502] (rev 04)
    Subsystem: Dell Device [1028:053a]
    Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
    Subsystem: Dell Device [1028:053a]
    Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series
Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
    Subsystem: Dell Device [1028:053a]
    Kernel driver in use: snd_hda_intel
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
    Subsystem: Dell Device [1028:053a]
    Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev a4)
00:1f.0 ISA bridge [0601]: Intel Corporation C216 Series Chipset LPC
Controller [8086:1e53] (rev 04)
    Subsystem: Dell Device [1028:053a]
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA
Controller [RAID mode] [8086:2822] (rev 04)
    Subsystem: Dell Device [1028:053a]
    Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset
Family SMBus Controller [8086:1e22] (rev 04)
    Subsystem: Dell Device [1028:053a]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218
[Quadro NVS 300] [10de:10d8] (rev a2)
    Subsystem: NVIDIA Corporation Device [10de:0862]
    Kernel driver in use: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio
Controller [10de:0be3] (rev a1)
    Subsystem: NVIDIA Corporation Device [10de:0862]
    Kernel driver in use: snd_hda_intel



Installation du système de base :
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [0]
Detect network card:    [E]
The card was not detected at all. It didn't work out on this computer
newly bought but as well as another one with debian already installed
on it and without any network card related problem. It seems to me as
a regression not found in the beta3 installer
Configure network:      [ ]
Detect CD:              [O]
Load installer modules: [ ]
Detect hard drives:     [O]
Partition hard drives:  [ ]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [O]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [E]

Comments/Problems:


It seems that a regression occurs between the beta 3 installation
(going on as now without any problem apparently. At least a lot less)
for at least the network.
As I tested with this CD, RAID installs seems to be not possible (it
does not recognize new hardware, that work with beta3 install) but I
did not tested the installation very far. It should tested again to be
sure.


Best regards and thank you for the good work !
Florent
Reply to: