[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#692051: marked as done (installation-reports)



Your message dated Thu, 1 Nov 2012 18:43:12 +0100
with message-id <20121101184312.c02d3061.linux@wansing-online.de>
and subject line Re: Bug#692051: installation-reports
has caused the Debian Bug report #692051,
regarding installation-reports
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
692051: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=692051
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports

Boot method: usb key
Image version: debian-wheezy-DI-b3-amd64-netinst
Date: 2012-10-30

Machine: custom core i5 desktop
Linux i5 3.2.0-3-amd64 #1 SMP Mon Jul 23 02:45:17 UTC 2012 x86_64 GNU/Linux
Processor: intel core i5
Memory: 8 Go DDR3
Partitions: 
cyrille@i5:~$ df -Tl
Sys. fich.                                             Type     1K-blocks     Util. Disponible Uti% Monté sur
rootfs                                                 rootfs   146277780   9260444  129693176   7% /
udev                                                   devtmpfs     10240         0      10240   0% /dev
tmpfs                                                  tmpfs       818924       776     818148   1% /run
/dev/disk/by-uuid/4853458d-11d9-4f2d-bb62-5f8a2536d48b ext4     146277780   9260444  129693176   7% /
tmpfs                                                  tmpfs         5120         0       5120   0% /run/lock
tmpfs                                                  tmpfs      3852940       228    3852712   1% /run/shm

Résultat de lspci -knn (ou lspci -nn) :
cyrille@i5:~$ lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] (rev 11)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11)
	Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)
	Subsystem: Device [0043:0083]
00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)
	Subsystem: Device [0043:0083]
00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)
	Subsystem: Device [0043:0083]
00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)
00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)
00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
	Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
	Subsystem: ASUSTeK Computer Inc. Device [1043:83e4]
	Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06)
	Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06)
	Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 06)
	Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 [8086:3b4e] (rev 06)
	Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 8 [8086:3b50] (rev 06)
	Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a6)
00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b02] (rev 06)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b22] (rev 06)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
	Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Cypress [Radeon HD 5800 Series] [1002:6899]
	Subsystem: PC Partner Limited Device [174b:e140]
	Kernel driver in use: fglrx_pci
01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Cypress HDMI Audio [Radeon HD 5800 Series] [1002:aa50]
	Subsystem: PC Partner Limited Device [174b:aa50]
	Kernel driver in use: snd_hda_intel
02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03)
	Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
	Kernel driver in use: ahci
02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03)
	Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
	Kernel driver in use: pata_jmicron
03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03)
	Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
	Kernel driver in use: ahci
03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03)
	Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
	Kernel driver in use: pata_jmicron
07:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0)
	Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
	Kernel driver in use: firewire_ohci
07:04.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10)
	Subsystem: ASUSTeK Computer Inc. Device [1043:820d]
	Kernel driver in use: r8169
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers [8086:2c51] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2c81] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2c90] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
	Kernel driver in use: i7core_edac
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2c91] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:03.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller [8086:2c98] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:03.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder [8086:2c99] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:03.4 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Test Registers [8086:2c9c] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:04.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers [8086:2ca0] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:04.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers [8086:2ca1] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:04.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers [8086:2ca2] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:04.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2ca3] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:05.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers [8086:2ca8] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:05.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers [8086:2ca9] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:05.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers [8086:2caa] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:05.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2cab] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:


Everything seemed fine to me. Only my graphic card was not fully supported since it is an ATI with non-free driver. so, i've added it once installation finished.
Perhaps, it should be great to be able to select the kind of source: main, non-free, contrib we want to use at install step.
Anyway, thanks for your great work to all.

Best regards.
Cyrille
--
M. Cyrille Mescam
46, avenue de l'Amiral Lemonnier
78160 Marly-le-Roi, France
+33 662 454 252

--- End Message ---
--- Begin Message ---
Hi,

Cyrille Mescam <cmescam@gmail.com> wrote:
> Comments/Problems:
> 
> 
> Everything seemed fine to me. Only my graphic card was not fully supported
> since it is an ATI with non-free driver. so, i've added it once installation
> finished.
> Perhaps, it should be great to be able to select the kind of source: main,
> non-free, contrib we want to use at install step.

When you use 'expert install' at the initial screen (under 'Advanced
options') you are indeed provided with a dialog asking if you want non-free
or contrib included (main is always included).

Anyway, thanks for your report!
I will close it, as it was a complete success.

Holger

-- 
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Created with Sylpheed 3.0.2
    under  D e b i a n   G N U / L I N U X   6.0  ( S q u e e z e )
        Registered LinuxUser #311290 - http://counter.li.org/
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

--- End Message ---

Reply to: