Bug#674449: marked as done (Installation mostly successfully on Desktop-PC with AMD Llano)
Your message dated Thu, 24 May 2012 22:33:37 +0100
with message-id <4FBEA931.6080807@debianpt.org>
and subject line Re: Bug#674449: Installation mostly successfully on Desktop-PC with AMD Llano
has caused the Debian Bug report #674449,
regarding Installation mostly successfully on Desktop-PC with AMD Llano
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)
--
674449: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=674449
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Boot method: CD
Image version: Self-made boot-CD with wheezy-installer Alpha1
Date: 2012-05-24
Machine: Self-made Desktop PC
Processor: AMD A6-3650 APU with Radeon(tm) HD Graphics @ 4x2,6GHz
Memory: 4GB
Partitions:
> Dateisystem Typ 1K-Blöcke Benutzt Verfügbar Verw% Eingehängt auf
> rootfs rootfs 10415144 5623064 4269688 57% /
> udev devtmpfs 1893664 0 1893664 0% /dev
> tmpfs tmpfs 380044 344 379700 1% /run
> /dev/disk/by-uuid/37d3ac7f-a422-4eee-8f1b-a08b4d5dd886 ext4 10415144 5623064 4269688 57% /
> tmpfs tmpfs 5120 0 5120 0% /run/lock
> tmpfs tmpfs 760084 4 760080 1% /tmp
> tmpfs tmpfs 760084 8 760076 1% /run/shm
> /dev/sda7 ext4 255235680 3927844 238531236 2% /home
Output of lspci -knn:
> 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h Processor Root Complex [1022:1705]
> Subsystem: Advanced Micro Devices [AMD] Family 12h Processor Root Complex [1022:1705]
> 00:01.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6530D] [1002:964a]
> Subsystem: Giga-byte Technology Device [1458:d000]
> Kernel driver in use: radeon
> 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Family 12h Processor Root Port [1022:1709]
> Kernel driver in use: pcieport
> 00:10.0 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB XHCI Controller [1022:7812] (rev 03)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: xhci_hcd
> 00:10.1 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB XHCI Controller [1022:7812] (rev 03)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: xhci_hcd
> 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] Hudson SATA Controller [AHCI mode] [1022:7801] (rev 40)
> Subsystem: Giga-byte Technology Device [1458:b002]
> Kernel driver in use: ahci
> 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB OHCI Controller [1022:7807] (rev 11)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: ohci_hcd
> 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB EHCI Controller [1022:7808] (rev 11)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: ehci_hcd
> 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB OHCI Controller [1022:7807] (rev 11)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: ohci_hcd
> 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB EHCI Controller [1022:7808] (rev 11)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: ehci_hcd
> 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] Hudson SMBus Controller [1022:780b] (rev 13)
> Subsystem: Giga-byte Technology Device [1458:4385]
> Kernel driver in use: piix4_smbus
> 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Hudson Azalia Controller [1022:780d] (rev 01)
> Subsystem: Giga-byte Technology Device [1458:a132]
> Kernel driver in use: snd_hda_intel
> 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] Hudson LPC Bridge [1022:780e] (rev 11)
> Subsystem: Advanced Micro Devices [AMD] nee ATI Device [1002:439d]
> 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] Hudson PCI Bridge [1022:780f] (rev 40)
> 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB OHCI Controller [1022:7809] (rev 11)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: ohci_hcd
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43)
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 [1022:1701]
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 [1022:1702]
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 [1022:1703]
> Kernel driver in use: k10temp
> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 [1022:1704]
> 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 [1022:1718]
> 00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 [1022:1716]
> 00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 [1022:1719]
> 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
> Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard [1458:e000]
> Kernel driver in use: r8169
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [O]
Comments/Problems:
Boot-loader was installed successfully.
But, my Windows 7 was not detected after installation.
After the first reboot, Windows 7 was not listed in the Grub boot menu.
This is not really a problem.
I installed the package "os-prober" and executed "update-grub" as root.
This is described in errata sheet of the installer (Bug #666750).
Now, Windows 7 is detected and listed in boot menu.
I investigated the syslog of the installer and found the following:
> May 24 14:39:36 os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda1
> May 24 14:39:36 50mounted-tests: debug: mounted using GRUB ntfs filesystem driver
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10freedos
> May 24 14:39:36 10freedos: debug: /dev/sda1 is not a FAT partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10qnx
> May 24 14:39:36 10qnx: debug: /dev/sda1 is not a QNX4 partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20macosx
> May 24 14:39:36 macosx-prober: debug: /dev/sda1 is not an HFS+ partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20microsoft
> May 24 14:39:36 20microsoft: debug: /dev/sda1 is a NTFS partition
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/30utility
> May 24 14:39:36 30utility: debug: /dev/sda1 is not a FAT partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/40lsb
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/70hurd
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/80minix
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/83haiku
> May 24 14:39:36 83haiku: debug: /dev/sda1 is not a BeFS partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/90linux-distro
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/90solaris
> May 24 14:39:36 50mounted-tests: warning: failed to umount /var/lib/os-prober/mount
> May 24 14:39:36 os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda2
> May 24 14:39:36 50mounted-tests: debug: mounted using GRUB ntfs filesystem driver
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10freedos
> May 24 14:39:36 10freedos: debug: /dev/sda2 is not a FAT partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10qnx
> May 24 14:39:36 10qnx: debug: /dev/sda2 is not a QNX4 partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20macosx
> May 24 14:39:36 macosx-prober: debug: /dev/sda2 is not an HFS+ partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20microsoft
> May 24 14:39:36 20microsoft: debug: /dev/sda2 is a NTFS partition
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/30utility
> May 24 14:39:36 30utility: debug: /dev/sda2 is not a FAT partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/40lsb
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/70hurd
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/80minix
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/83haiku
> May 24 14:39:36 83haiku: debug: /dev/sda2 is not a BeFS partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/90linux-distro
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/90solaris
> May 24 14:39:36 50mounted-tests: warning: failed to umount /var/lib/os-prober/mount
The partitions sda1 and sda2, where Windows 7 is installed, were
correctly detected as NTFS partitions.
But it was not detected as a Windows 7 installation.
Please also have a look at the last message:
"failed to umount /var/lib/os-prober/mount".
This behaviour is a known issue.
To prevent duplicate bug reports, please close this bug report.
If you need further informations, please let me know.
Thank you.
Best regards
Bernhard
--- End Message ---
--- Begin Message ---
Hi,
thanks for giving feedback on your installation.
From what I recall this is the first report of an installation on an
AMD Llano.
Closing the installation report, as you suggested, and the (minor) issue
is already addressed on another BR.
--
Melhores cumprimentos/Best regards,
Miguel Figueiredo
--- End Message ---
Reply to: