Bug#674449: Installation mostly successfully on Desktop-PC with AMD Llano
Package: installation-reports
Boot method: CD
Image version: Self-made boot-CD with wheezy-installer Alpha1
Date: 2012-05-24
Machine: Self-made Desktop PC
Processor: AMD A6-3650 APU with Radeon(tm) HD Graphics @ 4x2,6GHz
Memory: 4GB
Partitions:
> Dateisystem Typ 1K-Blöcke Benutzt Verfügbar Verw% Eingehängt auf
> rootfs rootfs 10415144 5623064 4269688 57% /
> udev devtmpfs 1893664 0 1893664 0% /dev
> tmpfs tmpfs 380044 344 379700 1% /run
> /dev/disk/by-uuid/37d3ac7f-a422-4eee-8f1b-a08b4d5dd886 ext4 10415144 5623064 4269688 57% /
> tmpfs tmpfs 5120 0 5120 0% /run/lock
> tmpfs tmpfs 760084 4 760080 1% /tmp
> tmpfs tmpfs 760084 8 760076 1% /run/shm
> /dev/sda7 ext4 255235680 3927844 238531236 2% /home
Output of lspci -knn:
> 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h Processor Root Complex [1022:1705]
> Subsystem: Advanced Micro Devices [AMD] Family 12h Processor Root Complex [1022:1705]
> 00:01.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6530D] [1002:964a]
> Subsystem: Giga-byte Technology Device [1458:d000]
> Kernel driver in use: radeon
> 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Family 12h Processor Root Port [1022:1709]
> Kernel driver in use: pcieport
> 00:10.0 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB XHCI Controller [1022:7812] (rev 03)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: xhci_hcd
> 00:10.1 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB XHCI Controller [1022:7812] (rev 03)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: xhci_hcd
> 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] Hudson SATA Controller [AHCI mode] [1022:7801] (rev 40)
> Subsystem: Giga-byte Technology Device [1458:b002]
> Kernel driver in use: ahci
> 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB OHCI Controller [1022:7807] (rev 11)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: ohci_hcd
> 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB EHCI Controller [1022:7808] (rev 11)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: ehci_hcd
> 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB OHCI Controller [1022:7807] (rev 11)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: ohci_hcd
> 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB EHCI Controller [1022:7808] (rev 11)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: ehci_hcd
> 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] Hudson SMBus Controller [1022:780b] (rev 13)
> Subsystem: Giga-byte Technology Device [1458:4385]
> Kernel driver in use: piix4_smbus
> 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Hudson Azalia Controller [1022:780d] (rev 01)
> Subsystem: Giga-byte Technology Device [1458:a132]
> Kernel driver in use: snd_hda_intel
> 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] Hudson LPC Bridge [1022:780e] (rev 11)
> Subsystem: Advanced Micro Devices [AMD] nee ATI Device [1002:439d]
> 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] Hudson PCI Bridge [1022:780f] (rev 40)
> 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] Hudson USB OHCI Controller [1022:7809] (rev 11)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Kernel driver in use: ohci_hcd
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43)
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 [1022:1701]
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 [1022:1702]
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 [1022:1703]
> Kernel driver in use: k10temp
> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 [1022:1704]
> 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 [1022:1718]
> 00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 [1022:1716]
> 00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 [1022:1719]
> 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
> Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard [1458:e000]
> Kernel driver in use: r8169
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [O]
Comments/Problems:
Boot-loader was installed successfully.
But, my Windows 7 was not detected after installation.
After the first reboot, Windows 7 was not listed in the Grub boot menu.
This is not really a problem.
I installed the package "os-prober" and executed "update-grub" as root.
This is described in errata sheet of the installer (Bug #666750).
Now, Windows 7 is detected and listed in boot menu.
I investigated the syslog of the installer and found the following:
> May 24 14:39:36 os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda1
> May 24 14:39:36 50mounted-tests: debug: mounted using GRUB ntfs filesystem driver
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10freedos
> May 24 14:39:36 10freedos: debug: /dev/sda1 is not a FAT partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10qnx
> May 24 14:39:36 10qnx: debug: /dev/sda1 is not a QNX4 partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20macosx
> May 24 14:39:36 macosx-prober: debug: /dev/sda1 is not an HFS+ partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20microsoft
> May 24 14:39:36 20microsoft: debug: /dev/sda1 is a NTFS partition
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/30utility
> May 24 14:39:36 30utility: debug: /dev/sda1 is not a FAT partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/40lsb
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/70hurd
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/80minix
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/83haiku
> May 24 14:39:36 83haiku: debug: /dev/sda1 is not a BeFS partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/90linux-distro
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/90solaris
> May 24 14:39:36 50mounted-tests: warning: failed to umount /var/lib/os-prober/mount
> May 24 14:39:36 os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda2
> May 24 14:39:36 50mounted-tests: debug: mounted using GRUB ntfs filesystem driver
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10freedos
> May 24 14:39:36 10freedos: debug: /dev/sda2 is not a FAT partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10qnx
> May 24 14:39:36 10qnx: debug: /dev/sda2 is not a QNX4 partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20macosx
> May 24 14:39:36 macosx-prober: debug: /dev/sda2 is not an HFS+ partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20microsoft
> May 24 14:39:36 20microsoft: debug: /dev/sda2 is a NTFS partition
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/30utility
> May 24 14:39:36 30utility: debug: /dev/sda2 is not a FAT partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/40lsb
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/70hurd
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/80minix
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/83haiku
> May 24 14:39:36 83haiku: debug: /dev/sda2 is not a BeFS partition: exiting
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/90linux-distro
> May 24 14:39:36 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/90solaris
> May 24 14:39:36 50mounted-tests: warning: failed to umount /var/lib/os-prober/mount
The partitions sda1 and sda2, where Windows 7 is installed, were
correctly detected as NTFS partitions.
But it was not detected as a Windows 7 installation.
Please also have a look at the last message:
"failed to umount /var/lib/os-prober/mount".
This behaviour is a known issue.
To prevent duplicate bug reports, please close this bug report.
If you need further informations, please let me know.
Thank you.
Best regards
Bernhard
Reply to: