--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-reports: Install report for Etch 4.0r3 on self built computer
- From: Nathaniel Homier <nathaniel.homier@bresnan.net>
- Date: Mon, 24 Mar 2008 22:45:53 -0600
- Message-id: <20080325044553.22433.66836.reportbug@localhost>
Package: installation-reports
Severity: wishlist
-- Package-specific info:
Boot method: DVD
Image version: http://debian.osuosl.org/debian-cdimage/current/i386/iso-dvd/debian-40r3-i386-DVD-1.iso
Date: February 17 2008, 11:42
Machine: Intel D865PERL Motherboard
Partitions: Disk /dev/hda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 12 96358+ 83 Linux
/dev/hda2 13 2565 20506972+ 83 Linux
/dev/hda3 2566 19457 135684990 5 Extended
/dev/hda5 2566 19457 135684958+ 8e Linux LVM
Disk /dev/sda: 400.0 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 243 1951866 82 Linux swap /
Solaris
/dev/sda2 244 48641 388756935 5 Extended
/dev/sda5 244 48641 388756903+ 8e Linux LVM
Disk /dev/dm-0: 537.0 GB, 537026101248 bytes
255 heads, 63 sectors/track, 65289 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/dm-0 doesn't contain a valid partition table
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [0]
Detect network card: [0]
Configure network: [0]
Detect CD: [0]
Load installer modules: [0]
Detect hard drives: [0]
Partition hard drives: [0]
Install base system: [0]
Clock/timezone setup: [0]
User/password setup: [0]
Install tasks: [0]
Install boot loader: [0]
Overall install: [0]
Comments/Problems:
Upon rebooting the computer into the Debian DVD install disc and
arriving at the initial screen the red swirl was missing and in it's
place was simply a large field of white. Basically the screen was just
fine except for the missing swirl. I hit enter and proceeded to install
Debian 4.0 rev3. The install went perfectly and presented no problems.
I had been using a version of the debian-installer on another os before
called alternate-install so I felt right at home.
No problem here.
Rebooting into the GDM screen presented a very pleasing login screen. I
immediately noticed that my monitor was properly detected and this gave
quite a bit of confidence right off the bat with Debian. Logging in
presented no problems and the desktop was very pleasing to the eyes.
However I immediately noticed the network-manager applet had a red x or
something on it. The network-manager applet was telling me that I had
no network. This was not true as I had a fully working wired network.
During the install I had hit cancel during the DHCP configuration and
set my network up manually. I have a wired static network. Since the
network was working I just went ahead and ignored it for the moment.
Later on while I was poking around in gnome-system-monitor I noticed the
network-manager applet used 12 MB of memory. I was not pleased with the
memory usage so I immediately went to the session manager in
"Desktop>Preferences" and selected disable for the applet. Problem
solved and the applet wound up being removed at the same time from the
panel.
I went to synaptic to poke around and in the menu for the repositories I
noticed that only the DVD and security were enabled. This makes sense
to me for server setups, so I had no problem with it. I proceded to add
the regular Etch repository but it was labeled testing and it defaulted
to Sarge and Sarge was labled stable. This was confusing for a few
minutes untill I verified my disc. I think this might be somewhat
confusing for novice users and I would like to suggest that this be put
in the release-notes to give a heads up. Ultimately it does not
matter too much to me as I have found myself using aptitude anyway.
Moving on to check out the gnome-system-log. This presented itself with
being unable to see any logs. I fixed this by adding myself to the
appropiate group. This makes sense as a default. But I would say that
any competent administrator would be using a central installation server
along with preseeding to roll out the install in the network, so I
consider it highly likely that someone using the DVD-ROM is probably a
home user. So basicaly it would be nice if the debian-installer noticed
that the install was DVD based and that the user selected desktop in
tasksel and would automatically add the regular user to the appropriate
group for monitoring logs. Another way to do this would be for the
tasksel after the task selection screen to ask if the user would like to
be added to the proper group for monitoring logs. All in all just a
minor inconvenience.
Like I always do with any fresh install of any brand of OS, I proceeded
to http://www.grc.com and took the "ShieldsUP!" test. Of particular
concern was my router which I had selected my lan ip for DMZ because the
Linksys befsr41 router version I am using is broken in several ways such
that I am always stealthed no matter what and trace route is severly
broken. The only solution where I do not have problems with this router
is in DMZ to my lan ip. So anyway I am at the shields-up page and it
shows port 111 is open. Well I don't like that so I turned off the DMZ
for now. I don't know the reason for that port being open but I am sure
the developers had a good reason. Eventually I will get around to
asking on the Debian users mailing list if it's okay to have that port
open on the internet.
All in all I am pretty happy with Etch. I was using a Debian based
distro which had a 6 month release cycle and after a couple of years of
upgrading twice a year, I just got sick of it. Plus that distro was
fairly buggy. I am sooo ready for upgrade cycles of 1.5 to 2 years.
Using Debian stable will mean less antacid. I originally started with
Debian just a bit before Sarge was released and now I am back again. I
am already aware of Lenny coming down the line but I have made myself a
plan to always wait until the second or third rev of any stable release
before I upgrade.
Thank you Debian developers and volunteers for a great Etch release!
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308etch2)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux debian 2.6.18-6-486 #1 Sat Jan 26 08:50:43 UTC 2008 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
lspci -nn: 00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller [8086:2571] (rev 02)
lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02)
lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02)
lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02)
lspci -nn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02)
lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02)
lspci -nn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02)
lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
lspci -nn: 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] [10de:00f1] (rev a2)
lspci -nn: 02:01.0 Ethernet controller [0200]: D-Link System Inc RTL8139 Ethernet [1186:1300] (rev 10)
lspci -nn: 02:02.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
lspci -nn: 02:02.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
lspci -nn: 02:02.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63)
lspci -nn: 02:04.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004] (rev 04)
lspci -nn: 02:04.1 Input device controller [0980]: Creative Labs SB Audigy Game Port [1102:7003] (rev 04)
lspci -nn: 02:04.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port [1102:4001] (rev 04)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
lspci -vnn: Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Memory at f0000000 (32-bit, prefetchable) [size=128M]
lspci -vnn: Capabilities: [e4] Vendor Specific Information
lspci -vnn: Capabilities: [a0] AGP version 3.0
lspci -vnn:
lspci -vnn: 00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller [8086:2571] (rev 02)
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 32
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
lspci -vnn: Memory behind bridge: fb000000-fdffffff
lspci -vnn: Prefetchable memory behind bridge: e0000000-efffffff
lspci -vnn:
lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02)
lspci -vnn: Subsystem: Intel Corporation Unknown device [8086:524c]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -vnn: I/O ports at cc00 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02)
lspci -vnn: Subsystem: Intel Corporation Unknown device [8086:524c]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 177
lspci -vnn: I/O ports at d000 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02)
lspci -vnn: Subsystem: Intel Corporation Unknown device [8086:524c]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 185
lspci -vnn: I/O ports at d400 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02)
lspci -vnn: Subsystem: Intel Corporation Unknown device [8086:524c]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -vnn: I/O ports at d800 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20)
lspci -vnn: Subsystem: Intel Corporation Unknown device [8086:524c]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 201
lspci -vnn: Memory at fe100000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Debug port
lspci -vnn:
lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
lspci -vnn: I/O behind bridge: 0000a000-0000bfff
lspci -vnn: Memory behind bridge: fe000000-fe0fffff
lspci -vnn:
lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn:
lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
lspci -vnn: Subsystem: Intel Corporation Unknown device [8086:524c]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 185
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at ffa0 [size=16]
lspci -vnn: Memory at 88000000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn:
lspci -vnn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
lspci -vnn: Subsystem: Intel Corporation Unknown device [8086:524c]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 185
lspci -vnn: I/O ports at ec00 [size=8]
lspci -vnn: I/O ports at e800 [size=4]
lspci -vnn: I/O ports at e400 [size=8]
lspci -vnn: I/O ports at e000 [size=4]
lspci -vnn: I/O ports at dc00 [size=16]
lspci -vnn:
lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
lspci -vnn: Subsystem: Intel Corporation Unknown device [8086:524c]
lspci -vnn: Flags: medium devsel, IRQ 12
lspci -vnn: I/O ports at c800 [size=32]
lspci -vnn:
lspci -vnn: 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] [10de:00f1] (rev a2)
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
lspci -vnn: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: Memory at e0000000 (32-bit, prefetchable) [size=256M]
lspci -vnn: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: Expansion ROM at fd000000 [disabled] [size=128K]
lspci -vnn: Capabilities: [60] Power Management version 2
lspci -vnn: Capabilities: [44] AGP version 3.0
lspci -vnn:
lspci -vnn: 02:01.0 Ethernet controller [0200]: D-Link System Inc RTL8139 Ethernet [1186:1300] (rev 10)
lspci -vnn: Subsystem: D-Link System Inc Unknown device [1186:1301]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 209
lspci -vnn: I/O ports at b800 [size=256]
lspci -vnn: Memory at fe004800 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn:
lspci -vnn: 02:02.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
lspci -vnn: Subsystem: AFAVLAB Technology Inc Unknown device [14db:3038]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 193
lspci -vnn: I/O ports at b000 [size=32]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 02:02.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
lspci -vnn: Subsystem: AFAVLAB Technology Inc Unknown device [14db:3038]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 185
lspci -vnn: I/O ports at b400 [size=32]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 02:02.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) (prog-if 20)
lspci -vnn: Subsystem: AFAVLAB Technology Inc Unknown device [14db:3104]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 177
lspci -vnn: Memory at fe004c00 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 02:04.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004] (rev 04)
lspci -vnn: Subsystem: Creative Labs Unknown device [1102:2002]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 10
lspci -vnn: I/O ports at ac00 [size=64]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 02:04.1 Input device controller [0980]: Creative Labs SB Audigy Game Port [1102:7003] (rev 04)
lspci -vnn: Subsystem: Creative Labs Unknown device [1102:0040]
lspci -vnn: Flags: bus master, medium devsel, latency 32
lspci -vnn: I/O ports at bc00 [size=8]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 02:04.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port [1102:4001] (rev 04) (prog-if 10)
lspci -vnn: Subsystem: Creative Labs Unknown device [1102:0010]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 201
lspci -vnn: Memory at fe004000 (32-bit, non-prefetchable) [size=2K]
lspci -vnn: Memory at fe000000 (32-bit, non-prefetchable) [size=16K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
modulemap: 8086:24d2 uhci_hcd
modulemap: 8086:24d4 uhci_hcd
modulemap: 8086:24d7 uhci_hcd
modulemap: 8086:24de uhci_hcd
modulemap: 8086:24dd ehci_hcd
modulemap: 8086:24db piix
modulemap: 8086:24d1 ata_piix
modulemap: 1186:1300 8139too
modulemap: 1106:3038 uhci_hcd
modulemap: 1106:3038 uhci_hcd
modulemap: 1106:3104 ehci_hcd
modulemap: 1102:4001 ohci1394
lsmod: Module Size Used by
lsmod: qnx4 10612 0
lsmod: ntfs 184084 0
lsmod: dm_mod 48952 3
lsmod: xfs 464756 0
lsmod: reiserfs 210432 0
lsmod: jfs 156380 0
lsmod: ext3 116488 2
lsmod: jbd 47272 1 ext3
lsmod: vfat 11392 0
lsmod: fat 45596 1 vfat
lsmod: 8139too 24192 0
lsmod: mii 5376 1 8139too
lsmod: eth1394 17540 0
lsmod: nls_iso8859_1 4096 0
lsmod: rsrc_nonstatic 11648 0
lsmod: pcmcia_core 35856 1 rsrc_nonstatic
lsmod: sbp2 20232 0
lsmod: isofs 31544 0
lsmod: ide_generic 1280 0 [permanent]
lsmod: pdc202xx_new 7808 0 [permanent]
lsmod: sc1200 6528 0 [permanent]
lsmod: sis5513 12296 0 [permanent]
lsmod: opti621 3972 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: pdc202xx_old 9344 0 [permanent]
lsmod: it821x 7684 0 [permanent]
lsmod: siimage 10880 0 [permanent]
lsmod: atiixp 5776 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: trm290 3972 0 [permanent]
lsmod: alim15x3 11020 0 [permanent]
lsmod: via82cxxx 8324 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: ns87415 4168 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: jmicron 4096 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: slc90e66 4992 0 [permanent]
lsmod: aec62xx 6656 0 [permanent]
lsmod: cmd64x 9884 0 [permanent]
lsmod: usb_storage 70976 0
lsmod: vga16fb 11148 2
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28136 0
lsmod: usbkbd 6656 0
lsmod: thermal 13320 0
lsmod: processor 23212 1 thermal
lsmod: fan 4740 0
lsmod: sd_mod 18832 3
lsmod: ide_cd 35360 0
lsmod: cdrom 32160 1 ide_cd
lsmod: ide_disk 14720 4
lsmod: usbhid 35552 0
lsmod: piix 9092 0 [permanent]
lsmod: ohci1394 29744 0
lsmod: ieee1394 84408 3 eth1394,sbp2,ohci1394
lsmod: ata_piix 13704 2
lsmod: ehci_hcd 26888 0
lsmod: libata 87316 1 ata_piix
lsmod: scsi_mod 121352 4 sbp2,usb_storage,sd_mod,libata
lsmod: generic 4740 0 [permanent]
lsmod: ide_core 107248 31 ide_generic,pdc202xx_new,sc1200,sis5513,opti621,amd74xx,pdc202xx_old,it821x,siimage,atiixp,cy82c693,trm290,alim15x3,via82cxxx,hpt34x,ns87415,rz1000,cs5520,serverworks,cs5535,jmicron,cs5530,triflex,slc90e66,aec62xx,cmd64x,usb_storage,ide_cd,ide_disk,piix,generic
lsmod: uhci_hcd 19980 0
lsmod: usbcore 108676 7 usb_storage,usbserial,usbkbd,usbhid,ehci_hcd,uhci_hcd
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 453396 424 452972 0% /dev
df: tmpfs 453396 424 452972 0% /dev
df: tmpfs 453396 424 452972 0% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part2 20184676 1917244 17242084 10% /target
df: /dev/ide/host0/bus0/target0/lun0/part1 90297 12390 73090 14% /target/boot
df: /dev/mapper/ngroup1-nhome1 516209064 202672 489784416 0% /target/home
free: total used free shared buffers
free: Mem: 906792 836992 69800 0 54064
free: Swap: 1951856 420 1951436
free: Total: 2858648 837412 2021236
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 3
/proc/cpuinfo: model name : Intel(R) Pentium(R) 4 CPU 3.20GHz
/proc/cpuinfo: stepping : 4
/proc/cpuinfo: cpu MHz : 3200.409
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 5
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pni monitor ds_cpl cid xtpr
/proc/cpuinfo: bogomips : 6404.36
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 0400-047f : 0000:00:1f.0
/proc/ioports: 0400-0403 : ACPI PM1a_EVT_BLK
/proc/ioports: 0404-0405 : ACPI PM1a_CNT_BLK
/proc/ioports: 0408-040b : ACPI PM_TMR
/proc/ioports: 0410-0415 : ACPI CPU throttle
/proc/ioports: 0420-0420 : ACPI PM2_CNT_BLK
/proc/ioports: 0428-042f : ACPI GPE0_BLK
/proc/ioports: 0500-053f : 0000:00:1f.0
/proc/ioports: 0500-053f : pnp 00:08
/proc/ioports: 0680-06ff : pnp 00:08
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: a000-bfff : PCI Bus #02
/proc/ioports: ac00-ac3f : 0000:02:04.0
/proc/ioports: b000-b01f : 0000:02:02.0
/proc/ioports: b000-b01f : uhci_hcd
/proc/ioports: b400-b41f : 0000:02:02.1
/proc/ioports: b400-b41f : uhci_hcd
/proc/ioports: b800-b8ff : 0000:02:01.0
/proc/ioports: b800-b8ff : 8139too
/proc/ioports: bc00-bc07 : 0000:02:04.1
/proc/ioports: c800-c81f : 0000:00:1f.3
/proc/ioports: cc00-cc1f : 0000:00:1d.0
/proc/ioports: cc00-cc1f : uhci_hcd
/proc/ioports: d000-d01f : 0000:00:1d.1
/proc/ioports: d000-d01f : uhci_hcd
/proc/ioports: d400-d41f : 0000:00:1d.2
/proc/ioports: d400-d41f : uhci_hcd
/proc/ioports: d800-d81f : 0000:00:1d.3
/proc/ioports: d800-d81f : uhci_hcd
/proc/ioports: dc00-dc0f : 0000:00:1f.2
/proc/ioports: dc00-dc0f : libata
/proc/ioports: e000-e003 : 0000:00:1f.2
/proc/ioports: e000-e003 : libata
/proc/ioports: e400-e407 : 0000:00:1f.2
/proc/ioports: e400-e407 : libata
/proc/ioports: e800-e803 : 0000:00:1f.2
/proc/ioports: e800-e803 : libata
/proc/ioports: ec00-ec07 : 0000:00:1f.2
/proc/ioports: ec00-ec07 : libata
/proc/ioports: ffa0-ffaf : 0000:00:1f.1
/proc/ioports: ffa0-ffa7 : ide0
/proc/ioports: ffa8-ffaf : ide1
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-7fe2ffff : System RAM
/proc/iomem: 00100000-00276ef8 : Kernel code
/proc/iomem: 00276ef9-0030cc73 : Kernel data
/proc/iomem: 7fe30000-7fe3e6d4 : ACPI Non-volatile Storage
/proc/iomem: 7ff10000-7ff2ffff : reserved
/proc/iomem: 7ff30000-7ff3ffff : ACPI Tables
/proc/iomem: 7ff40000-7ffeffff : ACPI Non-volatile Storage
/proc/iomem: 7fff0000-7fffffff : reserved
/proc/iomem: 88000000-880003ff : 0000:00:1f.1
/proc/iomem: e0000000-efffffff : PCI Bus #01
/proc/iomem: e0000000-efffffff : 0000:01:00.0
/proc/iomem: f0000000-f7ffffff : 0000:00:00.0
/proc/iomem: fb000000-fdffffff : PCI Bus #01
/proc/iomem: fb000000-fbffffff : 0000:01:00.0
/proc/iomem: fc000000-fcffffff : 0000:01:00.0
/proc/iomem: fd000000-fd01ffff : 0000:01:00.0
/proc/iomem: fe000000-fe0fffff : PCI Bus #02
/proc/iomem: fe000000-fe003fff : 0000:02:04.2
/proc/iomem: fe004000-fe0047ff : 0000:02:04.2
/proc/iomem: fe004000-fe0047ff : ohci1394
/proc/iomem: fe004800-fe0048ff : 0000:02:01.0
/proc/iomem: fe004800-fe0048ff : 8139too
/proc/iomem: fe004c00-fe004cff : 0000:02:02.2
/proc/iomem: fe004c00-fe004cff : ehci_hcd
/proc/iomem: fe100000-fe1003ff : 0000:00:1d.7
/proc/iomem: fe100000-fe1003ff : ehci_hcd
/proc/iomem: fecf0000-fecf0fff : reserved
/proc/iomem: fed20000-fed9ffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 493895 IO-APIC-edge timer
/proc/interrupts: 1: 4401 IO-APIC-edge i8042
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 14: 90009 IO-APIC-edge ide0
/proc/interrupts: 15: 19662 IO-APIC-edge ide1
/proc/interrupts: 169: 91 IO-APIC-level uhci_hcd:usb1, uhci_hcd:usb4
/proc/interrupts: 177: 4 IO-APIC-level uhci_hcd:usb2, ehci_hcd:usb8
/proc/interrupts: 185: 16750 IO-APIC-level uhci_hcd:usb3, uhci_hcd:usb6, libata
/proc/interrupts: 193: 526 IO-APIC-level uhci_hcd:usb5
/proc/interrupts: 201: 5 IO-APIC-level ehci_hcd:usb7, ohci1394
/proc/interrupts: 209: 26525 IO-APIC-level eth1
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 493851
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 906792 kB
/proc/meminfo: MemFree: 69656 kB
/proc/meminfo: Buffers: 54064 kB
/proc/meminfo: Cached: 708664 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 310940 kB
/proc/meminfo: Inactive: 468128 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 906792 kB
/proc/meminfo: LowFree: 69656 kB
/proc/meminfo: SwapTotal: 1951856 kB
/proc/meminfo: SwapFree: 1951436 kB
/proc/meminfo: Dirty: 1388 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 16380 kB
/proc/meminfo: Mapped: 1716 kB
/proc/meminfo: Slab: 47752 kB
/proc/meminfo: PageTables: 216 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 2405252 kB
/proc/meminfo: Committed_AS: 20048 kB
/proc/meminfo: VmallocTotal: 122576 kB
/proc/meminfo: VmallocUsed: 8692 kB
/proc/meminfo: VmallocChunk: 112988 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=046d Product=c51a Version=4101
/proc/bus/input/devices: N: Name="Logitech USB Receiver"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.0-1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=mouse0
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=ffff0000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=143
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=046d Product=c51a Version=4101
/proc/bus/input/devices: N: Name="Logitech USB Receiver"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.0-1/input1
/proc/bus/input/devices: S: Sysfs=/class/input/input2
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=f
/proc/bus/input/devices: B: KEY=c0002 400 0 0 1 f80 78000 6639fa d84157ad 8e0000 0 0 0
/proc/bus/input/devices: B: REL=40
/proc/bus/input/devices: B: ABS=1 0
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 76 structures occupying 2694 bytes.
dmidecode: Table at 0x000FBB80.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Intel Corp.
dmidecode: Version: RL86510A.86A.0089.P21.0502132202
dmidecode: Release Date: 02/13/2005
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: EDD is supported
dmidecode: Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
dmidecode: Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: AGP is supported
dmidecode: LS-120 boot is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode: BIOS boot specification is supported
dmidecode: Function key-initiated network boot is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer:
dmidecode: Product Name:
dmidecode: Version:
dmidecode: Serial Number:
dmidecode: UUID: 41E4857B-1F4C-11D8-9DD5-00E0180A1CED
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: Intel Corporation
dmidecode: Product Name: D865PERL
dmidecode: Version: AAC27648-208
dmidecode: Serial Number: AZRL34804748
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer:
dmidecode: Type: Unknown
dmidecode: Lock: Not Present
dmidecode: Version:
dmidecode: Serial Number:
dmidecode: Asset Tag:
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Other
dmidecode: Security Status: Other
dmidecode: OEM Information: 0x00000000
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: J2E1
dmidecode: Type: Central Processor
dmidecode: Family: Pentium 4
dmidecode: Manufacturer: Intel
dmidecode: ID: 34 0F 00 00 FF FB EB BF
dmidecode: Signature: Type 0, Family 15, Model 3, Stepping 4
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: DS (Debug store)
dmidecode: ACPI (ACPI supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: SS (Self-snoop)
dmidecode: HTT (Hyper-threading technology)
dmidecode: TM (Thermal monitor supported)
dmidecode: PBE (Pending break enabled)
dmidecode: Version: Intel(R) Pentium(R) 4 processor
dmidecode: Voltage: 3.3 V 2.9 V
dmidecode: External Clock: 200 MHz
dmidecode: Max Speed: 3200 MHz
dmidecode: Current Speed: 3200 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Socket 478
dmidecode: L1 Cache Handle: 0x0005
dmidecode: L2 Cache Handle: 0x0006
dmidecode: L3 Cache Handle: Not Provided
dmidecode: Serial Number: To Be Filled By O.E.M.
dmidecode: Asset Tag: To Be Filled By O.E.M.
dmidecode: Part Number: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: None
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Varies With Memory Address
dmidecode: Location: Internal
dmidecode: Installed Size: 16 KB
dmidecode: Maximum Size: 16 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Installed SRAM Type: Pipeline Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Data
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: None
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Varies With Memory Address
dmidecode: Location: Internal
dmidecode: Installed Size: 1024 KB
dmidecode: Maximum Size: 1024 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Installed SRAM Type: Pipeline Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x0007, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0008, DMI type 5, 24 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: 64-bit ECC
dmidecode: Error Correcting Capabilities:
dmidecode: None
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 1024 MB
dmidecode: Maximum Total Memory Size: 4096 MB
dmidecode: Supported Speeds:
dmidecode: 70 ns
dmidecode: 60 ns
dmidecode: Supported Memory Types:
dmidecode: Other
dmidecode: Unknown
dmidecode: Standard
dmidecode: FPM
dmidecode: EDO
dmidecode: Parity
dmidecode: ECC
dmidecode: SIMM
dmidecode: DIMM
dmidecode: Burst EDO
dmidecode: SDRAM
dmidecode: Memory Module Voltage: 3.3 V
dmidecode: Associated Memory Slots: 4
dmidecode: 0x0009
dmidecode: 0x000A
dmidecode: 0x000B
dmidecode: 0x000C
dmidecode: Enabled Error Correcting Capabilities:
dmidecode: None
dmidecode:
dmidecode: Handle 0x0009, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: PS2Mouse
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x000A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Keyboard
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x000B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J2A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: COM 1
dmidecode: External Connector Type: DB-9 female
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x000C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J4A2
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LPT1
dmidecode: External Connector Type: DB-25 male
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: JA5A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: JA5A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9E1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: FireWire
dmidecode: External Connector Type: IEEE 1394
dmidecode: Port Type: Firewire (IEEE P1394)
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J2A2
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J2A2
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: JA5A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: RJ-45 Type
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J4A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Mic In
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J4A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Line In
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J4A1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Line Out
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J4B1 - +12V
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J3J1 - FDD
dmidecode: Internal Connector Type: On Board Floppy
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J5J2 - PRI IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J5J1 - SEC IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9B2 - CDIN
dmidecode: Internal Connector Type: On Board Sound Input From CD-ROM
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9B1 - AUX IN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J8J1 - FRONT PANEL HDR
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x001D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J1F2 - CPU FAN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x001E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9H3 - FNT PNL
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x001F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J6J2 - FRONT CHASSIS FAN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0020, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J5B1 - REAR CHASSIS FAN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0021, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J7H2 - BIOS CONFIG
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0022, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J8A1 - FP AUDIO
dmidecode: Internal Connector Type: Proprietary
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0023, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J7F1 - FRONT PANEL USB
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0024, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J2J1 - PS
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0025, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J6J3 - CH INTR
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0026, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9D1 - FireWire
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0027, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J9E1 - FireWire
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0028, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J7H1 - SATA-0
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0029, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: J6H1 - SATA-1
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002A, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: J5C1
dmidecode: Type: 32-bit AGP 4x
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode:
dmidecode: Handle 0x002B, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: J6B2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x002C, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: J6B1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 3
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x002D, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: J7B1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 4
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x002E, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: J8B2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 5
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x002F, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: J8B1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 6
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode: SMBus signal is supported
dmidecode:
dmidecode: Handle 0x0030, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Video
dmidecode: Status: Disabled
dmidecode: Description: Intel GMCH AGP Graphics Controller
dmidecode:
dmidecode: Handle 0x0031, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Ethernet
dmidecode: Status: Disabled
dmidecode: Description: Intel 82562 Ethernet Device
dmidecode:
dmidecode: Handle 0x0032, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Sound
dmidecode: Status: Disabled
dmidecode: Description: Intel ICH4 Audio Device
dmidecode:
dmidecode: Handle 0x0033, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Other
dmidecode: Status: Enabled
dmidecode: Description: FireWire IEEE P1394 Controller
dmidecode:
dmidecode: Handle 0x0034, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: ETK_VER_01.01
dmidecode:
dmidecode: Handle 0x0035, DMI type 12, 5 bytes
dmidecode: System Configuration Options
dmidecode: Option 1: To Be Filled By O.E.M.
dmidecode: Option 2: To Be Filled By O.E.M.
dmidecode: Option 3: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0036, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: enUS
dmidecode: Currently Installed Language: enUS
dmidecode:
dmidecode: Handle 0x0037, DMI type 15, 35 bytes
dmidecode: System Event Log
dmidecode: Area Length: 2048 bytes
dmidecode: Header Start Offset: 0x0000
dmidecode: Header Length: 16 bytes
dmidecode: Data Start Offset: 0x0010
dmidecode: Access Method: Memory-mapped physical 32-bit address
dmidecode: Access Address: 0xFFFEF5F0
dmidecode: Status: Valid, Not Full
dmidecode: Change Token: 0x00000000
dmidecode: Header Format: Type 1
dmidecode: Supported Log Type Descriptors: 6
dmidecode: Descriptor 1: POST error
dmidecode: Data Format 1: POST results bitmap
dmidecode: Descriptor 2: Parity memory error
dmidecode: Data Format 2: Multiple-event
dmidecode: Descriptor 3: I/O channel block
dmidecode: Data Format 3: Multiple-event
dmidecode: Descriptor 4: Single-bit ECC memory error
dmidecode: Data Format 4: Multiple-event
dmidecode: Descriptor 5: Multi-bit ECC memory error
dmidecode: Data Format 5: Multiple-event
dmidecode: Descriptor 6: System limit exceeded
dmidecode: Data Format 6: System management
dmidecode:
dmidecode: Handle 0x0038, DMI type 18, 23 bytes
dmidecode: 32-bit Memory Error Information
dmidecode: Type: Unknown
dmidecode: Granularity: Unknown
dmidecode: Operation: Unknown
dmidecode: Vendor Syndrome: Unknown
dmidecode: Memory Array Address: Unknown
dmidecode: Device Address: Unknown
dmidecode: Resolution: Unknown
dmidecode:
dmidecode: Handle 0x0039, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 4 GB
dmidecode: Error Information Handle: 0x0038
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x003A, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0007FFFFFFF
dmidecode: Range Size: 2 GB
dmidecode: Physical Array Handle: 0x0039
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x003B, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0039
dmidecode: Error Information Handle: 0x0038
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: 1
dmidecode: Locator: J5G1
dmidecode: Bank Locator: CHANNEL A DIMM0
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode: Manufacturer: Manufacturer1
dmidecode: Serial Number: SerNum1
dmidecode: Asset Tag: AssetTagNum1
dmidecode: Part Number: PartNum1
dmidecode:
dmidecode: Handle 0x003C, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x003B
dmidecode: Memory Array Mapped Address Handle: 0x003A
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 1
dmidecode: Interleaved Data Depth: 1
dmidecode:
dmidecode: Handle 0x003D, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0039
dmidecode: Error Information Handle: 0x0038
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: 2
dmidecode: Locator: J5G2
dmidecode: Bank Locator: CHANNEL A DIMM1
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode: Manufacturer: Manufacturer2
dmidecode: Serial Number: SerNum2
dmidecode: Asset Tag: AssetTagNum2
dmidecode: Part Number: PartNum2
dmidecode:
dmidecode: Handle 0x003E, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00020000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x003D
dmidecode: Memory Array Mapped Address Handle: 0x003A
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 1
dmidecode: Interleaved Data Depth: 1
dmidecode:
dmidecode: Handle 0x003F, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0039
dmidecode: Error Information Handle: 0x0038
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: 1
dmidecode: Locator: J5H1
dmidecode: Bank Locator: CHANNEL B DIMM2
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode: Manufacturer: Manufacturer3
dmidecode: Serial Number: SerNum3
dmidecode: Asset Tag: AssetTagNum3
dmidecode: Part Number: PartNum3
dmidecode:
dmidecode: Handle 0x0040, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00040000000
dmidecode: Ending Address: 0x0005FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x003F
dmidecode: Memory Array Mapped Address Handle: 0x003A
dmidecode: Partition Row Position: 2
dmidecode: Interleave Position: 2
dmidecode: Interleaved Data Depth: 1
dmidecode:
dmidecode: Handle 0x0041, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0039
dmidecode: Error Information Handle: 0x0038
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: 2
dmidecode: Locator: J5H2
dmidecode: Bank Locator: CHANNEL B DIMM3
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode: Manufacturer: Manufacturer4
dmidecode: Serial Number: SerNum4
dmidecode: Asset Tag: AssetTagNum4
dmidecode: Part Number: PartNum4
dmidecode:
dmidecode: Handle 0x0042, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00060000000
dmidecode: Ending Address: 0x0007FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x0041
dmidecode: Memory Array Mapped Address Handle: 0x003A
dmidecode: Partition Row Position: 2
dmidecode: Interleave Position: 2
dmidecode: Interleaved Data Depth: 1
dmidecode:
dmidecode: Handle 0x0043, DMI type 23, 13 bytes
dmidecode: System Reset
dmidecode: Status: Disabled
dmidecode: Watchdog Timer: Not Present
dmidecode:
dmidecode: Handle 0x0044, DMI type 126, 28 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0045, DMI type 32, 20 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x0046, DMI type 187, 9 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: BB 09 46 00 3B 00 03 90 01
dmidecode:
dmidecode: Handle 0x0047, DMI type 187, 9 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: BB 09 47 00 3D 00 03 90 01
dmidecode:
dmidecode: Handle 0x0048, DMI type 187, 9 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: BB 09 48 00 3F 00 03 90 01
dmidecode:
dmidecode: Handle 0x0049, DMI type 187, 9 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: BB 09 49 00 41 00 03 90 01
dmidecode:
dmidecode: Handle 0x004A, DMI type 131, 12 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 83 0C 4A 00 01 01 02 01 00 00 00 01
dmidecode: Strings:
dmidecode: Intel_ASF_001
dmidecode: Intel_ASF_001
dmidecode:
dmidecode: Handle 0x004B, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: acpi-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: acpi-modules
Depends: kernel-image-2.6.18-6-486-di
Description: ACPI support modules
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13etch5
Description: GNU C Library: NSS helper for DNS - udeb
Package: usb-serial-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-6-486-di, usb-modules-2.6.18-6-486-di
Description: USB serial drivers
Package: cdrom-checker
Status: install ok unpacked
Version: 1.11
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: sata-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: sata-modules
Depends: kernel-image-2.6.18-6-486-di, scsi-core-modules-2.6.18-6-486-di
Description: SATA drivers
Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.45etch1
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: cdrom-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: cdrom-modules
Depends: ide-modules-2.6.18-6-486-di, cdrom-core-modules-2.6.18-6-486-di, kernel-image-2.6.18-6-486-di
Description: Esoteric CDROM drivers
Package: di-utils
Status: install ok installed
Version: 1.45etch1
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: serial-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: serial-modules
Depends: kernel-image-2.6.18-6-486-di, pcmcia-modules-2.6.18-6-486-di
Description: Serial drivers
Package: ide-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: ide-modules
Depends: kernel-image-2.6.18-6-486-di, ide-core-modules-2.6.18-6-486-di
Description: IDE drivers
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114etch1
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: input-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: input-modules
Depends: kernel-image-2.6.18-6-486-di, usb-modules-2.6.18-6-486-di
Description: Input devices support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.50+b1
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.105-4
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7.1
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: usb-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: usb-modules
Depends: kernel-image-2.6.18-6-486-di
Description: USB support
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1etch1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.114etch1
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: cdrom-core-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-6-486-di, scsi-core-modules-2.6.18-6-486-di, ide-modules-2.6.18-6-486-di
Description: CDROM support
Package: kernel-image-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: load-cdrom
Status: install ok installed
Version: 1.14
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: fat-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: fat-modules
Depends: kernel-image-2.6.18-6-486-di
Description: FAT filesystem support
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114etch1
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: ide-core-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: ide-core-modules
Depends: kernel-image-2.6.18-6-486-di
Description: IDE support
Package: pcmcia-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-6-486-di, firmware-modules-2.6.18-6-486-di
Description: Common PCMCIA drivers
Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: usb-storage-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-6-486-di, scsi-core-modules-2.6.18-6-486-di, usb-modules-2.6.18-6-486-di
Description: USB storage support
Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: scsi-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: scsi-modules
Depends: kernel-image-2.6.18-6-486-di, scsi-core-modules-2.6.18-6-486-di, parport-modules-2.6.18-6-486-di, cdrom-core-modules-2.6.18-6-486-di, firmware-modules-2.6.18-6-486-di
Description: SCSI drivers
Package: scsi-core-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-6-486-di
Description: Core SCSI subsystem
Package: firewire-core-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-6-486-di, kernel-image-2.6.18-6-486-di
Description: Core FireWire drivers
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45etch1
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: firmware-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: firmware-modules
Depends: kernel-image-2.6.18-6-486-di
Description: Firmware request modules
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45etch1
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50etch1
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: scsi-common-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-6-486-di, scsi-core-modules-2.6.18-6-486-di, cdrom-core-modules-2.6.18-6-486-di
Description: Very common SCSI drivers
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: parport-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: parport-modules
Depends: kernel-image-2.6.18-6-486-di
Description: Parallel port support
Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114etch1
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: floppy-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: floppy-modules
Depends: kernel-image-2.6.18-6-486-di
Description: Floppy driver
Package: pcmcia-storage-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-6-486-di, ide-core-modules-2.6.18-6-486-di, cdrom-core-modules-2.6.18-6-486-di, pcmcia-modules-2.6.18-6-486-di
Description: PCMCIA storage drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114etch1
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: fb-modules-2.6.18-6-486-di
Status: install ok unpacked
Version: 1.44etch3
Provides: fb-modules
Depends: kernel-image-2.6.18-6-486-di
Description: Frame buffer support
Package: cdrom-detect
Status: install ok installed
Version: 1.20etch1
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.45etch1)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20070308etch2
Description: debian installation image
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20etch1
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20etch1
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20etch1
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.76
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.13etch2
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50etch1), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.15
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.18-6-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2etch1
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5etch2
Depends: libc6 (>= 2.3.6-6)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45etch1
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-4
Depends: libc6 (>= 2.3.6-6)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2etch1
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: efi-modules-2.6.18-6-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di
Provides: efi-modules
Description: EFI modules
This package contains EFI modules.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
Installer-Menu-Item: 76
Package: ext3-modules-2.6.18-6-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-19etch1
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gpgv-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.6-2
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG's signature verification tool, gpgv, packaged in minimal
form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 340
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22etch1
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.18-6-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2etch1
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13etch5
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2etch1
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20etch1
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.18-6-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 408
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-4etch1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.18-6-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-9
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.18-6-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2992
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di, nic-shared-modules-2.6.18-6-486-di, firmware-modules-2.6.18-6-486-di, crc-modules-2.6.18-6-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.18-6-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di, nic-shared-modules-2.6.18-6-486-di, firmware-modules-2.6.18-6-486-di, firewire-core-modules-2.6.18-6-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.18-6-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 572
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di, nic-shared-modules-2.6.18-6-486-di, nic-extra-modules-2.6.18-6-486-di, pcmcia-modules-2.6.18-6-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.18-6-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.18-6-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 208
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di, nic-shared-modules-2.6.18-6-486-di, usb-modules-2.6.18-6-486-di, firmware-modules-2.6.18-6-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6+b2
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 672
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 68etch1
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 105
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 776
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20etch1
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base, efi-modules
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48etch1
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-6-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.18-6-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1388
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: scsi-modules-2.6.18-6-486-di, scsi-core-modules-2.6.18-6-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11etch1
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.18-6-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 552
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.18-6-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.18-6-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44etch3
Depends: kernel-image-2.6.18-6-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-6-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
--- End Message ---