--- Begin Message ---
- To: "" <submit@bugs.debian.org>
- Subject: working installation report (as requested)
- From: Christof Böckler <debian@jamesie.de>
- Date: Fri, 10 Nov 2006 15:31:32 +0100
- Message-id: <45548D44.4020509@jamesie.de>
Subject: installation-report: working installation report (as requested)
Package: installation-reports
Version: 2.23
Severity: wishlist
(see below)
-- Package-specific info:
Boot method: CD
Image version:
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-businesscard.iso
2006-11-10 08:34
Date: 2006/11/10 12:00
Machine: IBM compatible PC, i586, 64 MiB RAM
Partitions:
Disk /dev/hda: 854 MB, 854661120 bytes
255 heads, 63 sectors/track, 103 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 95 763056 83 Linux
/dev/hda2 96 103 64260 5 Extended
/dev/hda5 96 103 64228+ 82 Linux swap /
Solaris
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [ ]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
1. While asking for the proxy before installation the heading was still
"select a debian mirror".
2. I chose XFS for my / partition and was hoping that although /boot is
on XFS the debian installer would choose GRUB instead of LILO. But
without asking LILO was installed. I thought it would be sufficiently
safe to do that today.
3. I was a bit irritated that Apple file services were installed with
the file server task. I consider this to be overkill, since it seems
quite uncommon to me. (Btw. I already removed it as well as samba.)
Apart from that the installation worked very well. Congratulations to
all d-i developpers!
--
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20061102)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux knecht 2.6.17-2-486 #1 Wed Sep 13 15:56:30 UTC 2006 i586
unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 430FX - 82437FX
TSC [Triton I] [8086:122d] (rev 01)
lspci -nn: 00:07.0 ISA bridge [0601]: Intel Corporation 82371FB PIIX ISA
[Triton I] [8086:122e] (rev 02)
lspci -nn: 00:07.1 IDE interface [0101]: Intel Corporation 82371FB PIIX
IDE [Triton I] [8086:1230] (rev 02)
lspci -nn: 00:0a.0 SCSI storage controller [0100]: Adaptec AIC-7892A
U160/m [9005:0080] (rev 02)
lspci -nn: 00:0b.0 Ethernet controller [0200]: 3Com Corporation
3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 74)
lspci -nn: 00:0c.0 VGA compatible controller [0300]: Matrox Graphics,
Inc. MGA 2064W [Millennium] [102b:0519] (rev 01)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 430FX - 82437FX
TSC [Triton I] [8086:122d] (rev 01)
lspci -vnn: Flags: bus master, medium devsel, latency 32
lspci -vnn:
lspci -vnn: 00:07.0 ISA bridge [0601]: Intel Corporation 82371FB PIIX ISA
[Triton I] [8086:122e] (rev 02)
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn:
lspci -vnn: 00:07.1 IDE interface [0101]: Intel Corporation 82371FB PIIX
IDE [Triton I] [8086:1230] (rev 02) (prog-if 80 [Master])
lspci -vnn: Flags: bus master, medium devsel, latency 32
lspci -vnn: I/O ports at e800 [size=16]
lspci -vnn:
lspci -vnn: 00:0a.0 SCSI storage controller [0100]: Adaptec AIC-7892A
U160/m [9005:0080] (rev 02)
lspci -vnn: Subsystem: Adaptec Unknown device [9005:e2a0]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 12
lspci -vnn: BIST result: 00
lspci -vnn: I/O ports at e400 [disabled] [size=256]
lspci -vnn: Memory at e6000000 (64-bit, non-prefetchable) [size=4K]
lspci -vnn: [virtual] Expansion ROM at 10000000 [disabled] [size=128K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 00:0b.0 Ethernet controller [0200]: 3Com Corporation
3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 74)
lspci -vnn: Subsystem: 3Com Corporation Unknown device [10b7:1000]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 10
lspci -vnn: I/O ports at e000 [size=128]
lspci -vnn: Memory at e5800000 (32-bit, non-prefetchable) [size=128]
lspci -vnn: [virtual] Expansion ROM at 10020000 [disabled] [size=128K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 00:0c.0 VGA compatible controller [0300]: Matrox Graphics,
Inc. MGA 2064W [Millennium] [102b:0519] (rev 01)
lspci -vnn: Flags: stepping, medium devsel, IRQ 11
lspci -vnn: Memory at e5000000 (32-bit, non-prefetchable) [size=16K]
lspci -vnn: Memory at e7000000 (32-bit, prefetchable) [size=8M]
lspci -vnn: [virtual] Expansion ROM at 10040000 [disabled] [size=64K]
lspci -vnn:
lsmod: Module Size Used by
lsmod: qnx4 10484 0
lsmod: ntfs 184468 0
lsmod: xfs 481140 1
lsmod: reiserfs 210176 0
lsmod: jfs 156124 0
lsmod: ext3 115336 0
lsmod: jbd 45460 1 ext3
lsmod: vfat 11520 0
lsmod: fat 45852 1 vfat
lsmod: 3c59x 39976 0
lsmod: mii 5248 1 3c59x
lsmod: nls_iso8859_1 4224 0
lsmod: rsrc_nonstatic 11904 0
lsmod: pcmcia_core 36368 1 rsrc_nonstatic
lsmod: isofs 31672 0
lsmod: ide_generic 1408 0 [permanent]
lsmod: pdc202xx_new 7936 0 [permanent]
lsmod: aec62xx 6784 0 [permanent]
lsmod: alim15x3 11020 0 [permanent]
lsmod: amd74xx 12700 0 [permanent]
lsmod: atiixp 5520 0 [permanent]
lsmod: cmd64x 10140 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7812 0 [permanent]
lsmod: ns87415 4168 0 [permanent]
lsmod: opti621 4100 0 [permanent]
lsmod: pdc202xx_old 9472 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8200 0 [permanent]
lsmod: siimage 10752 0 [permanent]
lsmod: sis5513 12424 0 [permanent]
lsmod: slc90e66 5120 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 3972 0 [permanent]
lsmod: via82cxxx 8324 0 [permanent]
lsmod: floppy 52868 0
lsmod: usb_storage 69952 0
lsmod: usbserial 28136 0
lsmod: usbhid 35040 0
lsmod: usbkbd 6656 0
lsmod: usbcore 108544 4 usb_storage,usbserial,usbhid,usbkbd
lsmod: processor 21440 0
lsmod: ide_cd 35104 0
lsmod: cdrom 32288 1 ide_cd
lsmod: ide_disk 14976 3
lsmod: generic 4356 0 [permanent]
lsmod: piix 9220 0 [permanent]
lsmod: ide_core 107940 30
ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,ide_disk,generic,piix
lsmod: aic7xxx 153044 0
lsmod: scsi_transport_spi 22144 1 aic7xxx
lsmod: scsi_mod 120840 3 usb_storage,aic7xxx,scsi_transport_spi
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 31152 400 30752 1% /dev
df: tmpfs 31152 400 30752 1% /dev
df: tmpfs 31152 400 30752 1% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part1 758240 373744 384496
49% /target
free: total used free shared buffers
free: Mem: 62308 53768 8540 0 32
free: Swap: 64220 1812 62408
free: Total: 126528 55580 70948
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 30: cardctl: not
found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 31: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 5
/proc/cpuinfo: model : 2
/proc/cpuinfo: model name : Pentium 75 - 200
/proc/cpuinfo: stepping : 12
/proc/cpuinfo: cpu MHz : 132.645
/proc/cpuinfo: cache size : 0 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 1
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr mce cx8 up
/proc/cpuinfo: bogomips : 265.97
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: e000-e07f : 0000:00:0b.0
/proc/ioports: e400-e4ff : 0000:00:0a.0
/proc/ioports: e800-e80f : 0000:00:07.1
/proc/ioports: e800-e807 : ide0
/proc/ioports: e808-e80f : ide1
/proc/iomem: 00000000-0009ffff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-03ffffff : System RAM
/proc/iomem: 00100000-0026c0f2 : Kernel code
/proc/iomem: 0026c0f3-002f9cef : Kernel data
/proc/iomem: 10000000-1001ffff : 0000:00:0a.0
/proc/iomem: 10020000-1003ffff : 0000:00:0b.0
/proc/iomem: 10040000-1004ffff : 0000:00:0c.0
/proc/iomem: e5000000-e5003fff : 0000:00:0c.0
/proc/iomem: e5800000-e580007f : 0000:00:0b.0
/proc/iomem: e6000000-e6000fff : 0000:00:0a.0
/proc/iomem: e6000000-e6000fff : aic7xxx
/proc/iomem: e7000000-e77fffff : 0000:00:0c.0
/proc/iomem: ffff0000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 1198713 XT-PIC timer
/proc/interrupts: 1: 1009 XT-PIC i8042
/proc/interrupts: 2: 0 XT-PIC cascade
/proc/interrupts: 10: 104430 XT-PIC eth0
/proc/interrupts: 12: 15 XT-PIC aic7xxx
/proc/interrupts: 14: 53170 XT-PIC ide0
/proc/interrupts: 15: 2749 XT-PIC ide1
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 0
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 62308 kB
/proc/meminfo: MemFree: 8508 kB
/proc/meminfo: Buffers: 32 kB
/proc/meminfo: Cached: 42044 kB
/proc/meminfo: SwapCached: 1112 kB
/proc/meminfo: Active: 26820 kB
/proc/meminfo: Inactive: 17808 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 62308 kB
/proc/meminfo: LowFree: 8508 kB
/proc/meminfo: SwapTotal: 64220 kB
/proc/meminfo: SwapFree: 62408 kB
/proc/meminfo: Dirty: 220 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 3676 kB
/proc/meminfo: Slab: 5932 kB
/proc/meminfo: CommitLimit: 95372 kB
/proc/meminfo: Committed_AS: 6656 kB
/proc/meminfo: PageTables: 204 kB
/proc/meminfo: VmallocTotal: 1236688 kB
/proc/meminfo: VmallocUsed: 3124 kB
/proc/meminfo: VmallocChunk: 1232636 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf
ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: Legacy DMI 2.0 present.
dmidecode: 30 structures occupying 1015 bytes.
dmidecode: Table at 0x000F509A.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 18 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Award Software, Inc.
dmidecode: Version: #401A0-0302
dmidecode: Release Date: 12/30/97
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 128 kB
dmidecode: Characteristics:
dmidecode: ISA is supported
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: BIOS ROM is socketed
dmidecode: EDD is supported
dmidecode: Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 8 bytes
dmidecode: System Information
dmidecode: Manufacturer: System Manufacturer
dmidecode: Product Name: System Name
dmidecode: Version: System Version
dmidecode: Serial Number: SYS-1234567890
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: ASUSTeK Computer INC.
dmidecode: Product Name: P/I-P55TP4N
dmidecode: Version: REV 1.X
dmidecode: Serial Number: MB-1234567890
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 9 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Chassis Manufacture
dmidecode: Type: Unknown
dmidecode: Lock: Not Present
dmidecode: Version: Chassis Version
dmidecode: Serial Number: Chassis Serial Number
dmidecode: Asset Tag: Asset-1234567890
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 26 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: SOCKET 7
dmidecode: Type: Central Processor
dmidecode: Family: Pentium
dmidecode: Manufacturer: Intel Corporation
dmidecode: ID: 2C 05 00 00 BF 01 00 00
dmidecode: Signature: Type 0, Family 5, Model 2, Stepping 12
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: Version: Intel Pentium Processor
dmidecode: Voltage: 3.3 V
dmidecode: External Clock: 66 MHz
dmidecode: Max Speed: 200 MHz
dmidecode: Current Speed: 133 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: ZIF Socket
dmidecode:
dmidecode: Handle 0x0005, DMI type 5, 23 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: None
dmidecode: Error Correcting Capabilities:
dmidecode: None
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 64 MB
dmidecode: Maximum Total Memory Size: 256 MB
dmidecode: Supported Speeds:
dmidecode: 70 ns
dmidecode: 60 ns
dmidecode: 50 ns
dmidecode: Supported Memory Types:
dmidecode: FPM
dmidecode: EDO
dmidecode: Parity
dmidecode: SIMM
dmidecode: Memory Module Voltage: 5.0 V
dmidecode: Associated Memory Slots: 4
dmidecode: 0x0006
dmidecode: 0x0007
dmidecode: 0x0008
dmidecode: 0x0009
dmidecode:
dmidecode: Handle 0x0007, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: SIMM1&2-2
dmidecode: Bank Connections: 0 1
dmidecode: Current Speed: 70 ns
dmidecode: Type: FPM SIMM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: SIMM3&4-1
dmidecode: Bank Connections: 2 3
dmidecode: Current Speed: 70 ns
dmidecode: Type: EDO SIMM
dmidecode: Installed Size: 32 MB (Double-bank Connection)
dmidecode: Enabled Size: 32 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: SIMM3&4-2
dmidecode: Bank Connections: 2 3
dmidecode: Current Speed: 70 ns
dmidecode: Type: EDO SIMM
dmidecode: Installed Size: 32 MB (Double-bank Connection)
dmidecode: Enabled Size: 32 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000A, DMI type 7, 15 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 16 KB
dmidecode: Maximum Size: 16 KB
dmidecode: Supported SRAM Types: None
dmidecode: Installed SRAM Type: None
dmidecode:
dmidecode: Handle 0x000B, DMI type 7, 15 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: External
dmidecode: Installed Size: 256 KB
dmidecode: Maximum Size: 512 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Installed SRAM Type: Pipeline Burst
dmidecode:
dmidecode: Handle 0x000C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: COM1
dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
dmidecode: External Reference Designator: COM A
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: COM2
dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
dmidecode: External Reference Designator: COM B
dmidecode: External Connector Type: DB-25 male
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PRINTER
dmidecode: Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)
dmidecode: External Reference Designator: LPT
dmidecode: External Connector Type: DB-25 female
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: KEY
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: KEYBOARD
dmidecode: External Connector Type: Micro DIN
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PRIMARY IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: IDE-1
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SECONDARY IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: IDE-2
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: FLOPPY
dmidecode: Internal Connector Type: On Board Floppy
dmidecode: External Reference Designator: FLOPPY
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x0013, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: ID: 12
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x0014, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Short
dmidecode: ID: 11
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x0015, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot3
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Short
dmidecode: ID: 10
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x0016, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI Slot4
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 9
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: Opening is shared
dmidecode:
dmidecode: Handle 0x0017, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: ISA Slot1
dmidecode: Type: 16-bit ISA
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: Opening is shared
dmidecode:
dmidecode: Handle 0x0018, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: ISA Slot2
dmidecode: Type: 16-bit ISA
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x0019, DMI type 9, 12 bytes
dmidecode: System Slot Information
dmidecode: Designation: ISA Slot3
dmidecode: Type: 16-bit ISA
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode:
dmidecode: Handle 0x001A, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: OEM String
dmidecode:
dmidecode: Handle 0x001B, DMI type 12, 5 bytes
dmidecode: System Configuration Options
dmidecode: Option 1: System String
dmidecode:
dmidecode: Handle 0x001C, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: ENGLISH
dmidecode: Currently Installed Language: ENGLISH
dmidecode:
dmidecode: Handle 0x001D, DMI type 15, 20 bytes
dmidecode: System Event Log
dmidecode: Area Length: 4096 bytes
dmidecode: Header Start Offset: 0x0000
dmidecode: Header Length: 16 bytes
dmidecode: Data Start Offset: 0x0010
dmidecode: Access Method: Memory-mapped physical 32-bit address
dmidecode: Access Address: 0xFFFE8000
dmidecode: Status: Invalid, Not Full
dmidecode: Change Token: 0x00000000
dmidecode:
dmidecode: Wrong DMI structures count: 30 announced, only 29 decoded.
dmidecode: Wrong DMI structures length: 1015 bytes announced, structures
occupy 1014 bytes.
==============================================
Installer status:
==============================================
Package: input-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: input-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: Input devices support
Package: acpi-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: acpi-modules
Depends: kernel-image-2.6.17-2-486-di
Description: ACPI support modules
Package: scsi-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di,
parport-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di,
firmware-modules-2.6.17-2-486-di
Description: SCSI drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.29
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: cdrom-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: cdrom-modules
Depends: ide-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di,
kernel-image-2.6.17-2-486-di
Description: Esoteric CDROM drivers
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-4
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.09
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.15
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: usb-serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-serial-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: USB serial drivers
Package: di-utils
Status: install ok installed
Version: 1.39
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45),
cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: usb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: USB support
Package: pcmcia-storage-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di,
cdrom-core-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: PCMCIA storage drivers
Package: scsi-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-core-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Core SCSI subsystem
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.40
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: firmware-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firmware-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Firmware request modules
Package: udev-udeb
Status: install ok unpacked
Version: 0.100-2.2
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: fb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Frame buffer support
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-4
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: scsi-common-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-common-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di,
cdrom-core-modules-2.6.17-2-486-di
Description: Very common SCSI drivers
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: pcmcia-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: pcmcia-modules
Depends: kernel-image-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Description: Common PCMCIA drivers
Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: serial-modules
Depends: kernel-image-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: Serial drivers
Package: ide-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: ide-core-modules
Depends: kernel-image-2.6.17-2-486-di
Description: IDE support
Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.9.99pre2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.108
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45),
libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: floppy-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: floppy-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Floppy driver
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: parport-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: parport-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Parallel port support
Package: load-cdrom
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: firewire-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di
Description: Core FireWire drivers
Package: iso-3166-udeb
Status: install ok installed
Version: 0.57-1
Description: provides iso_3166.tab file
Package: floppy-retriever
Status: install ok unpacked
Version: 1.11
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.43
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils
(>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.20
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.43
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45)
Description: Hardware architecture detector
Package: cdrom-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: cdrom-core-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di,
ide-modules-2.6.17-2-486-di
Description: CDROM support
Package: save-logs
Status: install ok unpacked
Version: 2.23
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-1
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: usb-storage-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.17-2-486-di,
scsi-core-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: USB storage support
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.39
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.43
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75),
di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.45
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.20
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.8
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: fat-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fat-modules
Depends: kernel-image-2.6.17-2-486-di
Description: FAT filesystem support
Package: netcfg
Status: install ok installed
Version: 1.31
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28),
dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: sata-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: sata-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Description: SATA drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.108
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: ide-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: ide-modules
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di
Description: IDE drivers
Package: cdrom-detect
Status: install ok installed
Version: 1.18
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: kernel-image-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20061102
Description: debian installation image
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 596
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.68
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.45), mounted-partitions, debootstrap-udeb
(>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>=
1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 12
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.08
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.08
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.39
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.43
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>=
1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb
(>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76
Package: ext3-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-12
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.5
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab,
bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: grub-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>=
1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 212
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-7
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team
<parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15),
di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lowmem
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Description: free memory for lowmem install
Installer-Menu-Item: 25
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers
<pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.3.git200608202239-7
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>=
2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di,
nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di,
crc-modules-2.6.17-2-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di,
nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di,
firewire-core-modules-2.6.17-2-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 556
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di,
nic-shared-modules-2.6.17-2-486-di, nic-extra-modules-2.6.17-2-486-di,
pcmcia-modules-2.6.17-2-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di,
nic-shared-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di,
firmware-modules-2.6.17-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Mart?nez Moreno <ender@debian.org>
Version: 1.13.1-4
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45),
libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team
<parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 60
Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems,
partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14),
partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59),
partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2
Depends: cdebconf-udeb, partman-base, partman-basicfilesystems,
partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 848
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 97
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1),
cdebconf-udeb, partman-partitioning, partman-target, archdetect,
harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives,
created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules,
di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 856
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 11
Depends: partman-base
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 43
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules,
partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules,
partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 680
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14),
md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules,
partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods,
di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules,
partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1316
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: scsi-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.12
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 568
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i586)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-486
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
installation-report depends on no packages.
Versions of packages installation-report recommends:
pn pciutils <none> (no description available)
ii reportbug 3.30 reports bugs in the Debian
distrib
-- no debconf information
--- End Message ---