Package: installation-reports
Version: 2.42
Severity: important
User: debian-bsd@lists.debian.org
Usertags: kfreebsd
X-Debbugs-CC: debian-bsd@lists.debian.org
-- Package-specific info:
Boot method: CD
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/20101016-7/kfreebsd-i386/iso-cd/debian-testing-kfreebsd-i386-netinst.iso
Date: 2010-10-24
Machine: PIII with 2 IDE hard drives and 2 IDE optical drives.
Partitions: <df -Tl will do; the raw partition table is preferred>
# df -Tl
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/ad0s1 ufs 16467790 2969336 12181032 20% /
devfs devfs 1 1 0 100% /dev
linprocfs
linprocfs 4 4 0 100% /proc
/sys sysfs 4 4 0 100% /sys
fdescfs fdescfs 1 1 0 100% /dev/fd
tmpfs tmpfs 788444 4 788440 1% /lib/init/rw
# sfdisk -l /dev/ad0
last_lba(): I don't know how to handle files with mode 20660
Disk /dev/ad0: cannot get geometry
Disk /dev/ad0: 2193 cylinders, 255 heads, 63 sectors/track
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/ad0p1 * 0+ 2117- 2118- 17006592 a5 FreeBSD
/dev/ad0p2 2117+ 2193- 76- 610305 5 Extended
/dev/ad0p3 0 - 0 0 0 Empty
/dev/ad0p4 0 - 0 0 0 Empty
/dev/ad0p5 2117+ 2193- 76- 610304 82 Linux swap / Solaris
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
During partitioning got lots of these pop-up alerts for /dev/ad0:
-----------------| [!] Partition disks |------------------
Warning!
Could not flush cache of device /dev/ad0 - No such device.
<Go Back> <Continue>
And got one for /dev/ad1.
In the install menus the first character isn't highlighted when the item
is selected.
_Post-install_
Despite choosing UK keyboard on install still had to do
'dpkg-reconfigure kbdcontrol' and choose 'uk.iso.kbd' to get correct
keymap on console.
After booting, upowerd was running at 80+%, dramatically slowing down
the presentation of the GNOME login screen.
After booting, there were ata1 error messages filling ttyv0
and /var/log/messages.
# grep -i ata1 /var/log/messages
Oct 24 12:59:24 kara kernel: ata1: <ATA channel 1> on atapci0
Oct 24 12:59:24 kara kernel: ata1: [ITHREAD]
Oct 24 12:59:24 kara kernel: acd0: CDRW <YAMAHA CRW2216E/1.0f> at ata1-master PIO4
Oct 24 12:59:24 kara kernel: acd1: CDROM <LG CD-ROM CRD-8522B/2.00> at ata1-slave PIO4
Oct 24 12:59:24 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:24 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:24 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:24 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:24 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:24 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:24 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:24 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:24 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:24 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:24 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:24 kara kernel: (probe1:ata1:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
Oct 24 12:59:24 kara kernel: (probe1:ata1:0:1:0): CAM status: SCSI Status Error
Oct 24 12:59:24 kara kernel: (probe1:ata1:0:1:0): SCSI status: Check Condition
Oct 24 12:59:24 kara kernel: (probe1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
Oct 24 12:59:24 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:24 kara kernel: (probe0:ata1:0:0:0): AutoSense failed
Oct 24 12:59:24 kara kernel: cd0 at ata1 bus 0 scbus1 target 1 lun 0
Oct 24 12:59:54 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:54 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:54 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:54 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:54 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:54 kara kernel: ata1: error issuing ATA PACKET command
Oct 24 12:59:54 kara kernel: ata1: error issuing ATA PACKET command
[snip lots more of "ata1: error issuing ATA PACKET command"]
Regards,
Mike.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/kFreeBSD installer"
DISTRIB_RELEASE="6.0 (squeeze) - installer build 20101016-00:11"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
uname -a: GNU/kFreeBSD kara 8.1-1-486 #0 Tue Aug 17 22:35:34 CEST 2010 i686 GNU/Linux
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub [8086:1130] (rev 04)
lspci -nn: 00:01.0 PCI bridge [0604]: Intel Corporation 82815 815 Chipset AGP Bridge [8086:1131] (rev 04)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 02)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 02)
lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller [8086:244b] (rev 02)
lspci -nn: 00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2442] (rev 02)
lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus Controller [8086:2443] (rev 02)
lspci -nn: 00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2444] (rev 02)
lspci -nn: 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV11 [GeForce2 MX/MX 400] [10de:0110] (rev a1)
lspci -nn: 02:0b.0 Multimedia audio controller [0401]: Ensoniq 5880B [AudioPCI] [1274:5880] (rev 02)
lspci -nn: 02:0c.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 0c)
lspci -nn: 02:0d.0 Communication controller [0780]: Conexant Systems, Inc. HCF V90 56k Data/Fax/Voice/Spkp PCI Modem [14f1:1085] (rev 08)
usb-list: Error: directory /sys/bus does not exist; is sysfs mounted?
kldstat: Id Refs Address Size Name
kldstat: 1 5 0xc0400000 7e6000 kfreebsd.gz
kldstat: 2 1 0xc54d6000 10000 ext2fs.ko
kldstat: 3 1 0xc5da1000 4000 nullfs.ko
df: Filesystem 1K-blocks Used Available Use% Mounted on
df: /dev/md0 42479 30077 12402 71% /
df: devfs 1 1 0 100% /dev
df: devfs 1 1 0 100% /dev
df: fdescfs 1 1 0 100% /dev/fd
df: linprocfs 4 4 0 100% /proc
df: /sys 4 4 0 100% /sys
df: /dev/ad0s1 16467790 2840314 12310054 19% /target
df: devfs 1 1 0 100% /dev
df: linprocfs 4 4 0 100% /proc
df: /sys 4 4 0 100% /sys
df: devfs 1 1 0 100% /target/dev
free: /usr/bin/report-hw: line 63: free: not found
/proc/cmdline: BOOT_IMAGE=/kernel ro root=302
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 15
/proc/cpuinfo: model name : Intel Pentium III
/proc/cpuinfo: stepping : 6
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr xmm
/proc/cpuinfo: cpu MHz : 858.46
/proc/cpuinfo: bogomips : 858.46
/proc/meminfo: total: used: free: shared: buffers: cached:
/proc/meminfo: Mem: 313929728 59326464 254603264 1556480 0 8941568
/proc/meminfo: Swap: 624951296 13606912 611344384
/proc/meminfo: MemTotal: 306572 kB
/proc/meminfo: MemFree: 248636 kB
/proc/meminfo: MemShared: 1520 kB
/proc/meminfo: Buffers: 0 kB
/proc/meminfo: Cached: 8732 kB
/proc/meminfo: SwapTotal: 610304 kB
/proc/meminfo: SwapFree: 597016 kB
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: kfreebsd-i386 (i686)
Kernel: kFreeBSD 8.1-1-686
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:3.1.7-5 Linux PCI Utilities
ii reportbug 4.12.6 reports bugs in the Debian distrib
installation-report suggests no packages.
-- no debconf information
Attachment:
signature.asc
Description: OpenPGP digital signature