--- Begin Message ---
Package: installation-reports
Boot method: CD boot
Image version:
http://cdimage.debian.org/debian-cd/4.0_r0/i386/iso-cd/debian-40r0-i386-netinst.iso
Date: 10 May 2007
Machine: HP Vectra VL400
Processor: Pentium 3 730MHz
Memory: 512MB RAM
Partitions: df -Tl
Filesystem Typeblocchi di 1K Usati Disponib. Uso% Montato su
/dev/hda2 reiserfs 13863636 1713696 12149940 13% /
tmpfs tmpfs 257920 0 257920 0% /lib/init/rw
udev tmpfs 10240 40 10200 1% /dev
tmpfs tmpfs 257920 0 257920 0% /dev/shm
/dev/hda1 reiserfs 96312 39832 56480 42% /boot
lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge
and Memory Controller Hub [8086:1130] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82815 CGC [Chipset
Graphics Controller] [8086:1132] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801AA PCI Bridge [8086:2418]
(rev 02)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801AA ISA Bridge (LPC)
[8086:2410] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801AA IDE [8086:2411] (rev
02)
00:1f.2 USB Controller [0c03]: Intel Corporation 82801AA USB [8086:2412] (rev
02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801AA SMBus [8086:2413] (rev 02)
01:00.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado]
[10b7:9200] (rev 78)
01:01.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado]
[10b7:9200] (rev 78)
01:02.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado]
[10b7:9200] (rev 74)
01:04.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado]
[10b7:9200] (rev 78)
lspci -vnn
00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge
and Memory Controller Hub [8086:1130] (rev 02)
Subsystem: Intel Corporation 82815 815 Chipset Host Bridge and Memory
Controller Hub [8086:1130]
Flags: bus master, fast devsel, latency 0
Capabilities: [88] Vendor Specific Information
00:02.0 VGA compatible controller [0300]: Intel Corporation 82815 CGC [Chipset
Graphics Controller] [8086:1132] (rev 02) (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company Unknown device [103c:1245]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 10
Memory at f0000000 (32-bit, prefetchable) [size=64M]
Memory at ec000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [dc] Power Management version 2
00:1e.0 PCI bridge [0604]: Intel Corporation 82801AA PCI Bridge [8086:2418]
(rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: ec100000-ec1fffff
Prefetchable memory behind bridge: 30000000-300fffff
00:1f.0 ISA bridge [0601]: Intel Corporation 82801AA ISA Bridge (LPC)
[8086:2410] (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801AA IDE [8086:2411] (rev
02) (prog-if 80 [Master])
Subsystem: Intel Corporation 82801AA IDE [8086:2411]
Flags: bus master, medium devsel, latency 0
I/O ports at 1800 [size=16]
00:1f.2 USB Controller [0c03]: Intel Corporation 82801AA USB [8086:2412] (rev
02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801AA USB [8086:2412]
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1820 [size=32]
00:1f.3 SMBus [0c05]: Intel Corporation 82801AA SMBus [8086:2413] (rev 02)
Subsystem: Intel Corporation 82801AA SMBus [8086:2413]
Flags: medium devsel, IRQ 9
I/O ports at 1810 [size=16]
01:00.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado]
[10b7:9200] (rev 78)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management
NIC [10b7:1000]
Flags: bus master, medium devsel, latency 80, IRQ 11
I/O ports at 2080 [size=128]
Memory at ec100400 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 30000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
01:01.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado]
[10b7:9200] (rev 78)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management
NIC [10b7:1000]
Flags: bus master, medium devsel, latency 80, IRQ 5
I/O ports at 2400 [size=128]
Memory at ec100800 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 30020000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
01:02.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado]
[10b7:9200] (rev 74)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management
NIC [10b7:1000]
Flags: bus master, medium devsel, latency 80, IRQ 9
I/O ports at 2480 [size=128]
Memory at ec100c00 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 30040000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
01:04.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado]
[10b7:9200] (rev 78)
Subsystem: Hewlett-Packard Company Unknown device [103c:1246]
Flags: bus master, medium devsel, latency 80, IRQ 5
I/O ports at 2000 [size=128]
Memory at ec100000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 30060000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [O]
Comments/Problems:
The installation went fine but i got a problem with lilo and i believe it's a
bug.
I usually create a small boot partition (~100MB) and when I try to install
lilo in the MBR it fails.
I got it working in this way:
switch to a console and unmount the boot partition (umount /target/boot);
switch to the installation console and try to install lilo as the MBR for the
second time; it fails again;
switch to a console and mount back the boot partition
(mount /dev/path_to_the_boot_partition /target/boot).
Switching back to the installation console and installing lilo as the MBR now
works fine.
If you need other details please let me now, i would like to help you to fix
this bug.
--
Marco Gatti
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---