[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#422966: marked as done (Etch installation on Tatung CompStation10)

Your message dated Wed, 08 Sep 2010 03:58:26 +0000
with message-id <E1OtBnm-0005aO-9h@ravel.debian.org>
and subject line Closing old installation report #422966
has caused the Debian Bug report #422966,
regarding Etch installation on Tatung CompStation10
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
422966: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=422966
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method: CD
Image version: Latest release May 4, 2007
Date: May 5, 2007

Machine: Tatung Comp Station 10 
Sparc IIi 440 1 GB memory

Partitions: 
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sda2              6056192    661312   5087236  12% /
tmpfs                   517464         0    517464   0% /lib/init/rw
udev                     10240       144     10096   2% /dev
tmpfs                   517464         0    517464   0% /dev/shm
/dev/sda1                93335     12757     75759  15% /boot
/dev/sda6              1921188     51108   1772488   3% /home
/dev/sda7              3810760     73184   3543996   3% /samba/disk1
/dev/sdb2             16674164    184896  15642244   2% /samba/disk2
/dev/sda5              4806936   1272956   3289792  28% /usr

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [E]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]

lspci -nn

00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIi
[108e:a000]
00:01.0 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba
Advanced PCI Bridge [108e:5000] (rev 13)
00:01.1 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba
Advanced PCI Bridge [108e:5000] (rev 13)
01:01.0 Bridge [0680]: Sun Microsystems Computer Corp. EBUS [108e:1000]
(rev 01)
01:01.1 Ethernet controller [0200]: Sun Microsystems Computer Corp.
Happy Meal [108e:1001] (rev 01)
01:04.0 USB Controller [0c03]: OPTi Inc. 82C861 [1045:c861] (rev 10)
80:01.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic
53c875 [1000:000f] (rev 14)
80:01.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic
53c875 [1000:000f] (rev 14)
80:02.0 Multimedia audio controller [0401]: Creative Labs SB Live!
EMU10k1 [1102:0002] (rev 06)
80:02.1 Input device controller [0980]: Creative Labs SB Live! Game
Port [1102:7002] (rev 06)

lspci -vnn

00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIi
[108e:a000]
	Flags: bus master, 66MHz, medium devsel, latency 40

00:01.0 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba
Advanced PCI Bridge [108e:5000] (rev 13) (prog-if 00 [Normal decode])
	Flags: bus master, 66MHz, medium devsel, latency 64
	Bus: primary=00, secondary=80, subordinate=ff, sec-latency=64
	I/O behind bridge: 00000000-00000fff
	Memory behind bridge: 00000000-000fffff
	Prefetchable memory behind bridge: 00000000-000fffff

00:01.1 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba
Advanced PCI Bridge [108e:5000] (rev 13) (prog-if 00 [Normal decode])
	Flags: bus master, 66MHz, medium devsel, latency 64
	Bus: primary=00, secondary=01, subordinate=7f, sec-latency=64
	I/O behind bridge: 00000000-00000fff
	Memory behind bridge: 00000000-000fffff
	Prefetchable memory behind bridge: 00000000-000fffff

01:01.0 Bridge [0680]: Sun Microsystems Computer Corp. EBUS [108e:1000]
(rev 01)
	Flags: bus master, medium devsel, latency 10
	Memory at 1fff0000000 (32-bit, non-prefetchable) [size=16M]
	Memory at 1fff1000000 (32-bit, non-prefetchable) [size=8M]
	Expansion ROM at 1ff41000000 [disabled] [size=16M]

01:01.1 Ethernet controller [0200]: Sun Microsystems Computer Corp.
Happy Meal [108e:1001] (rev 01)
	Flags: bus master, medium devsel, latency 10, IRQ 10
	Memory at 1ff40008000 (32-bit, non-prefetchable) [size=32K]
	Expansion ROM at 1ff42000000 [disabled] [size=16M]

01:04.0 USB Controller [0c03]: OPTi Inc. 82C861 [1045:c861] (rev 10)
(prog-if 10 [OHCI])
	Subsystem: OPTi Inc. 82C861 [1045:c861]
	Flags: bus master, medium devsel, latency 32, IRQ 11
	Memory at 1ff40010000 (32-bit, non-prefetchable) [size=4K]

80:01.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic
53c875 [1000:000f] (rev 14)
	Flags: bus master, medium devsel, latency 17, IRQ 12
	I/O ports at 1fe02000400 [size=256]
	Memory at 1ff00002000 (32-bit, non-prefetchable) [size=256]
	Memory at 1ff00004000 (32-bit, non-prefetchable) [size=4K]

80:01.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic
53c875 [1000:000f] (rev 14)
	Flags: bus master, medium devsel, latency 17, IRQ 12
	I/O ports at 1fe02000800 [size=256]
	Memory at 1ff00006000 (32-bit, non-prefetchable) [size=256]
	Memory at 1ff00008000 (32-bit, non-prefetchable) [size=4K]

80:02.0 Multimedia audio controller [0401]: Creative Labs SB Live!
EMU10k1 [1102:0002] (rev 06)
	Subsystem: Creative Labs CT4832 SBLive! Value [1102:8027]
	Flags: medium devsel, IRQ 13
	I/O ports at 1fe02000c00 [size=32]
	Capabilities: <access denied>

80:02.1 Input device controller [0980]: Creative Labs SB Live! Game
Port [1102:7002] (rev 06)
	Subsystem: Creative Labs Gameport Joystick [1102:0020]
	Flags: bus master, medium devsel, latency 32
	I/O ports at 1fe02000c20 [size=8]
	Capabilities: <access denied>


Comments/Problems: when I tried to do the hard drive, using the manual
partition option, I got i386 type partitions (primary and logical
partitions).  I accepted the partitioning and was told that SILO
wouldn't load.  It was right.

I rebooted the CD and reinstalled.  This time I used the automatic
partition option and changed the partition table and it worked.  The
second drive showed i386 type partitions again.  But, by using these
partitions, the machine booted and I finished the installation.

I installed Etch about 6 months ago, when it was testing, and I don't
remember having this partitioning problem.

I don't know what the <access denied> means on the sound card. 
Probably it won't work.

All-in-all, I think it was an interesting experience.  I don't think
the Sparc64 install is for people who aren't familiar with the Sun
OpenBoot and paritioning system.  I personally find it very interesting
and challenging ... as long as I have internet access.

Earl Violet

"God made man, Sam Colt made men equal."
"The fates guide him who will, him who won't they drag" Spengler

--- End Message ---
--- Begin Message --- 
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.

--- End Message ---
Reply to: