[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#397062: marked as done (intel g965 ide failure)

Your message dated Wed, 08 Sep 2010 03:58:20 +0000
with message-id <E1OtBng-0005OI-5c@ravel.debian.org>
and subject line Closing old installation report #397062
has caused the Debian Bug report #397062,
regarding intel g965 ide failure
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
397062: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=397062
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method: netinst CD
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso
Image version: downloaded at Sat Nov 4 18:34:58 GMT 2006. Unable to get directory listings on cdimage.debian.org so I cannot verify which day's build "latest" currently points to. 
Date: Sat Nov 4, 2006

Machine: Core 2 Duo on intel G965WH board (using amd64, not i386)
Processor: Core 2 duo
Memory: 1 GB
Partitions:

Output of lspci -nn and lspci -vnn:
Note that the output is hand-typed. If you think I made any typos, I will happily boot into this again and verify. 

lspci -nn:
00:00.0 Host bridge [06600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G965 Integrated Graphics Controller [8086:29a2] (rev 02) 00:03.0 Communication controller [0780]: Intel Corporation 82P965/G965 HECI Controller [8086:29a4] (rev 02) 00:19.0 Ethernet controller [0c03]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 [8086:2834] (rev 02) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 [8086:2835] (rev 02) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 [8086:283a] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family)HD Audio Controller [8086:284b] (rev 02) 00:1c.0 PCI Bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) 00:1c.1 PCI Bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) 00:1c.2 PCI Bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 02) 00:1c.3 PCI Bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) 00:1c.4 PCI Bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 [8086:2830] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 [8086:2831] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 [8086:2832] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 [8086:2836] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HH (ICH8DH) LPC Interface Controller [8086:2812] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller [8086:2820] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) 00:1f.5 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller [8086:2825] (rev 02) 02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. Unknown device [11ab:6101] (rev b1) 06:03.0 FireWire (IEEE 1394) [0c00]L Texas Instruments TSB43AB22/A IEEE-1394a-200 Controller (PHY/Link) [104c:8023] 

lspci -vnn output (only for the Marvell):
02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. Unknown device [11ab:6101] (rev b1) (prog-if 8f [Master SecP SecO PriP PriO]) 
	Subsystem: Marvell Technology Group Ltd. Unknown device [11ab:6101]
	Flags: bus master, fast devsel, latency 0, IRQ 10
	I/O ports at 1018 [size=8]
	I/O ports at 1024 [size=4]
	I/O ports at 1010 [size=8]
	I/O ports at 1020 [size=4]
	I/O ports at 1000 [size=16]
	Memory at 50100000 (32-bit, non-prefetchable) [size=512]
	Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Maskk- 64bit- Queue=0/0 Enable- 
	Capabilities: [e0] Express Legacy Endpoint IRQ 0


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [ ]
Configure network:      [ ]
Detect CD:              [E]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [E]

Comments/Problems:
Installer was unable to find the CD drive. This has to do with the fact that the driver for the marvell parallel ide is apparently broken under kernel 2.6.17. The serial ATA seems to work fine, but my CD drive is PATA. I have seen suggestions in various places that it is fixed in kernel 2.6.18 but do have not tested this yet.
I also tried the amd64 sarge-custom-1012.iso image from http://kmuto.jp/debian/d-i/ and had the same error, although some people at http://forums.debian.net/viewtopic.php?p=36109 reported success with various images at that site. They apparently address problems other than the Marvell controller.
Additionally, I tried installing from ubuntu-6.10-server-amd64.iso downloaded the same day. It failed in the same manner. 



Jonathan

--- End Message ---
--- Begin Message --- 
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.

--- End Message ---
Reply to: