[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#392674: marked as done (Debian Etch beta 3 Installation Report)



Your message dated Wed, 08 Sep 2010 03:58:19 +0000
with message-id <E1OtBnf-0005MM-6t@ravel.debian.org>
and subject line Closing old installation report #392674
has caused the Debian Bug report #392674,
regarding Debian Etch beta 3 Installation Report
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
392674: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=392674
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports

Boot method: netinst CD
Image version: http://www.debian.org/devel/debian-installer/ [AMD64] Etch beta 3 Version, Oct 11, 2006
Date: Oct 11, 2006

Machine: self-assembled, ASUS A8N-SLI DeLuxe mobo, 1 IDE HD, 2 SATA HD

Processor: AMD Opteron 165 Double Core overclocked to 2.4 GHz
striky:~# more /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 35
model name      : Dual Core AMD Opteron(tm) Processor 165
stepping        : 2
cpu MHz         : 2408.076
cache size      : 1024 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm
cmp_legacy
bogomips        : 4821.20
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp


Memory: 4 GB DDR : 2 sets of [Corsair TwinX DDR PC3200 2x1G0 cas2]
striky:~# more /proc/meminfo
MemTotal:      4047296 kB
MemFree:       3505124 kB
Buffers:         18468 kB
Cached:         298300 kB
SwapCached:          0 kB
Active:         403744 kB
Inactive:        81580 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:      4047296 kB
LowFree:       3505124 kB
SwapTotal:     5076488 kB
SwapFree:      5076488 kB
Dirty:              60 kB
Writeback:           0 kB
Mapped:         230064 kB
Slab:            28776 kB
CommitLimit:   7100136 kB
Committed_AS:   519972 kB
PageTables:       9540 kB
VmallocTotal: 34359738367 kB
VmallocUsed:    265268 kB
VmallocChunk: 34359473091 kB


Partitions:
striky:~# df -h
Sys. de fich.         Tail. Occ. Disp. %Occ. Monté sur
/dev/sda13            9,2G  2,8G  6,0G  32% /
udev                   10M  116K  9,9M   2% /dev
devshm                2,0G     0  2,0G   0% /dev/shm
/dev/sda12             89M  7,1M   77M   9% /boot

Output of lspci and lspci -n:

striky:~# lspci
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7800 GTX] (rev a1)
05:0a.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
05:0c.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)

striky:~# lspci -n
00:00.0 0580: 10de:005e (rev a3)
00:01.0 0601: 10de:0050 (rev a3)
00:01.1 0c05: 10de:0052 (rev a2)
00:02.0 0c03: 10de:005a (rev a2)
00:02.1 0c03: 10de:005b (rev a3)
00:04.0 0401: 10de:0059 (rev a2)
00:06.0 0101: 10de:0053 (rev f2)
00:07.0 0101: 10de:0054 (rev f3)
00:08.0 0101: 10de:0055 (rev f3)
00:09.0 0604: 10de:005c (rev a2)
00:0a.0 0680: 10de:0057 (rev a3)
00:0b.0 0604: 10de:005d (rev a3)
00:0c.0 0604: 10de:005d (rev a3)
00:0d.0 0604: 10de:005d (rev a3)
00:0e.0 0604: 10de:005d (rev a3)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:00.0 0300: 10de:0091 (rev a1)
05:0a.0 0104: 1095:3114 (rev 02)
05:0b.0 0c00: 104c:8023
05:0c.0 0200: 11ab:4320 (rev 13)


First attempt at Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [E]
Install boot loader:    [ ]
Reboot:                 [ ]

Comments/Problems: installer got stuck for a long time (10 mins) while configuring "portmap",
and later froze 73% into base system when starting configuring "gconf2-common"

Might this be due to a network timeout on the mirror download site (mirrors.ircam.fr)?
Seems unlikely since this server had very good ping response time just before starting the net install.
The computer was left in frozen condition for 24 hours before the second, successful, identical attempt.


Second attempt, restarting from scratch, went through the end all right, except for a quite long
"configuring" sleep (a few minutes) about 94% into the install.



--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.



--- End Message ---

Reply to: