--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: installation-report: beta3 desktop install on Toshiba Satellite M55-S1001
- From: Joey Hess <joeyh@debian.org>
- Date: Wed, 11 Oct 2006 23:26:37 -0400
- Message-id: <20061012032637.GA5338@phoenix.kitenet.net>
Package: installation-reports
Severity: normal
Boot method: usb stick
Image version: hd-media + beta3 netinst
Date: 11 Oct
Machine: Toshiba Satellite M55-S1001
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type Size Used Avail Use% Mounted on
/dev/hda2 ext3 18G 2.5G 16G 14% /
udev tmpfs 10M 108K 9.9M 2% /dev
devshm tmpfs 94M 0 94M 0% /dev/shm
/dev/hda1 ntfs 38G 7.4G 30G 20% /media/windows
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [E]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
eject was not installed even though I selected the desktop task. This is
probably because as of beta3, the netinst CD didn't have eject in that task.
I've checked, and the dailies do have it.
Only other problem encountered during the install is a known issue with
partman partition resize not working with windows partitions if windows
was not cleanly shutdown. Tell it to resize and it immediatly returns to
the menu w/o an error message. I had to boot back into windows and shut
it down; given how slow windows is, that was a sizable fraction of the
total installation time.
Note that the /media/windows shown above was set up manually so my sister can
get at her files from windows, it's not something d-i does (yet, anyway).
Post-install, the gnome desktop was set up quite nicely. I was
especially impressed to see update-notifier immediatly tell me about a
kernel upgrade that was available (newer kernel version than the one on
the CD is now in testing), and work quite easily.
All the hardware worked, except for wifi, an Atheros AR5005G. I
installed madwifi from non-free, and it sees the card, however, it never
authenticates, and the LED for the wireless on the laptop stays red.
Since this matches the laptop's current behavior in windows, I suspect
it's not a software problem..
The mouse is a synaptics touchpad, and its accelleration was badly set
up, making it very annoying to use. I was able to get the touchpad working
better with this stanza. I think these problems are specific to this laptop.
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "AccelFactor" "1"
Option "MaxSpeed" "0.32"
Option "HorizScrollDelta" "0"
Option "SHMConfig" "on"
EndSection
Also, tapping and double-finger tapping and other synaptics features
don't seem to work on this laptop.
I haven't tried hibernate to see if it works out of the box. Probably
not, but perhaps I'll get lucky.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060806)"
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux phoenix 2.6.16-2-486 #1 Sat Jul 15 21:23:01 UTC 2006 i686 unknown
lspci -v -t: -[0000:00]-+-00.0 ATI Technologies Inc Unknown device 5a31
lspci -v -t: +-01.0-[0000:01]----05.0 ATI Technologies Inc RC410 [Radeon Xpress 200M]
lspci -v -t: +-04.0-[0000:02]--
lspci -v -t: +-13.0 ATI Technologies Inc IXP SB400 USB Host Controller
lspci -v -t: +-13.1 ATI Technologies Inc IXP SB400 USB Host Controller
lspci -v -t: +-13.2 ATI Technologies Inc IXP SB400 USB2 Host Controller
lspci -v -t: +-14.0 ATI Technologies Inc IXP SB400 SMBus Controller
lspci -v -t: +-14.1 ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
lspci -v -t: +-14.3 ATI Technologies Inc IXP SB400 PCI-ISA Bridge
lspci -v -t: +-14.4-[0000:04]--+-02.0 Atheros Communications, Inc. AR5005G 802.11abg NIC
lspci -v -t: | +-04.0 ENE Technology Inc CB1410 Cardbus Controller
lspci -v -t: | \-06.0 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
lspci -v -t: +-14.5 ATI Technologies Inc IXP SB400 AC'97 Audio Controller
lspci -v -t: \-14.6 ATI Technologies Inc ATI SB400 - AC'97 Modem Controller
lspci -n: 00:00.0 0600: 1002:5a31 (rev 01)
lspci -n: 00:01.0 0604: 1002:5a3f
lspci -n: 00:04.0 0604: 1002:5a36
lspci -n: 00:13.0 0c03: 1002:4374 (rev 80)
lspci -n: 00:13.1 0c03: 1002:4375 (rev 80)
lspci -n: 00:13.2 0c03: 1002:4373 (rev 80)
lspci -n: 00:14.0 0c05: 1002:4372 (rev 81)
lspci -n: 00:14.1 0101: 1002:4376 (rev 80)
lspci -n: 00:14.3 0601: 1002:4377 (rev 80)
lspci -n: 00:14.4 0604: 1002:4371 (rev 80)
lspci -n: 00:14.5 0401: 1002:4370 (rev 80)
lspci -n: 00:14.6 0703: 1002:4378 (rev 80)
lspci -n: 01:05.0 0300: 1002:5a62
lspci -n: 04:02.0 0200: 168c:001a (rev 01)
lspci -n: 04:04.0 0607: 1524:1410 (rev 01)
lspci -n: 04:06.0 0200: 10ec:8139 (rev 10)
lspci -v: 00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
lspci -v: Subsystem: Toshiba America Info Systems Unknown device ff00
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64
lspci -v:
lspci -v: 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64
lspci -v: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
lspci -v: I/O behind bridge: 00009000-00009fff
lspci -v: Memory behind bridge: d0100000-d01fffff
lspci -v: Prefetchable memory behind bridge: d8000000-dfffffff
lspci -v: Capabilities: [b0] #0d [0000]
lspci -v:
lspci -v: 00:04.0 PCI bridge: ATI Technologies Inc Unknown device 5a36
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
lspci -v: Capabilities: [50] Power Management version 3
lspci -v: Capabilities: [58] Express Root Port (Slot-) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [b0] #0d [0000]
lspci -v: Capabilities: [b8] HyperTransport: MSI Mapping
lspci -v: Capabilities: [100] Advanced Error Reporting
lspci -v: Capabilities: [140] Virtual Channel
lspci -v:
lspci -v: 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10)
lspci -v: Subsystem: Toshiba America Info Systems Unknown device ff00
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 209
lspci -v: Memory at d0004000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v:
lspci -v: 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10)
lspci -v: Subsystem: Toshiba America Info Systems Unknown device ff00
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 209
lspci -v: Memory at d0005000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v:
lspci -v: 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) (prog-if 20)
lspci -v: Subsystem: Toshiba America Info Systems Unknown device ff00
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 209
lspci -v: Memory at d0006000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [dc] Power Management version 2
lspci -v: Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v:
lspci -v: 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 81)
lspci -v: Subsystem: Toshiba America Info Systems Unknown device ff00
lspci -v: Flags: 66MHz, medium devsel
lspci -v: I/O ports at 8400 [size=16]
lspci -v: Memory at d0007000 (32-bit, non-prefetchable) [size=1K]
lspci -v:
lspci -v: 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80) (prog-if 8a [Master SecP PriP])
lspci -v: Subsystem: Toshiba America Info Systems Unknown device ff00
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 177
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at 8410 [size=16]
lspci -v: Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v:
lspci -v: 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
lspci -v: Subsystem: Toshiba America Info Systems Unknown device ff00
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 0
lspci -v:
lspci -v: 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) (prog-if 01)
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 64
lspci -v: Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
lspci -v: I/O behind bridge: 0000a000-0000afff
lspci -v: Memory behind bridge: d0200000-d02fffff
lspci -v: Prefetchable memory behind bridge: 10000000-11ffffff
lspci -v:
lspci -v: 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 80)
lspci -v: Subsystem: Toshiba America Info Systems Unknown device ff00
lspci -v: Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 11
lspci -v: Memory at d0007400 (32-bit, non-prefetchable) [size=256]
lspci -v: Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v:
lspci -v: 00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 80)
lspci -v: Subsystem: Toshiba America Info Systems Unknown device 0001
lspci -v: Flags: 66MHz, slow devsel, IRQ 201
lspci -v: Memory at d0007800 (32-bit, non-prefetchable) [size=256]
lspci -v: Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v:
lspci -v: 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
lspci -v: Subsystem: Toshiba America Info Systems Unknown device ff00
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 66, IRQ 11
lspci -v: Memory at d8000000 (32-bit, prefetchable) [size=128M]
lspci -v: I/O ports at 9000 [size=256]
lspci -v: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
lspci -v: [virtual] Expansion ROM at d0120000 [disabled] [size=128K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v:
lspci -v: 04:02.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)
lspci -v: Subsystem: Askey Computer Corp. Unknown device 7094
lspci -v: Flags: bus master, medium devsel, latency 80, IRQ 11
lspci -v: Memory at d0200000 (32-bit, non-prefetchable) [size=64K]
lspci -v: Capabilities: [44] Power Management version 2
lspci -v:
lspci -v: 04:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
lspci -v: Subsystem: Toshiba America Info Systems Unknown device ff00
lspci -v: Flags: bus master, medium devsel, latency 168, IRQ 177
lspci -v: Memory at d0211000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Bus: primary=04, secondary=05, subordinate=08, sec-latency=176
lspci -v: Memory window 0: 10000000-11fff000 (prefetchable)
lspci -v: Memory window 1: 12000000-13fff000
lspci -v: I/O window 0: 0000a400-0000a4ff
lspci -v: I/O window 1: 0000a800-0000a8ff
lspci -v: 16-bit legacy interface ports at 0001
lspci -v:
lspci -v: 04:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
lspci -v: Subsystem: Toshiba America Info Systems Unknown device ff00
lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 217
lspci -v: I/O ports at a000 [size=256]
lspci -v: Memory at d0210000 (32-bit, non-prefetchable) [size=256]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v:
lspci -x: 00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
lspci -x: 00: 02 10 31 5a 06 00 20 22 01 00 00 06 00 40 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 00 ff
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
lspci -x: 00: 02 10 3f 5a 07 00 30 02 00 00 04 06 00 40 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 01 01 40 91 91 20 22
lspci -x: 20: 10 d0 10 d0 00 d8 f0 df 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 b0 00 00 00 00 00 00 00 ff 00 0c 00
lspci -x:
lspci -x: 00:04.0 PCI bridge: ATI Technologies Inc Unknown device 5a36
lspci -x: 00: 02 10 36 5a 04 04 10 00 00 00 04 06 08 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 00
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 04 00
lspci -x:
lspci -x: 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
lspci -x: 00: 02 10 74 43 17 00 b0 02 80 10 03 0c 08 40 80 00
lspci -x: 10: 00 40 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 00 ff
lspci -x: 30: 00 00 00 00 d0 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
lspci -x: 00: 02 10 75 43 17 00 b0 02 80 10 03 0c 08 40 00 00
lspci -x: 10: 00 50 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 00 ff
lspci -x: 30: 00 00 00 00 d0 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
lspci -x: 00: 02 10 73 43 17 00 b0 02 80 20 03 0c 08 40 00 00
lspci -x: 10: 00 60 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 00 ff
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 81)
lspci -x: 00: 02 10 72 43 03 00 20 02 81 00 05 0c 00 00 80 00
lspci -x: 10: 01 84 00 00 00 70 00 d0 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 00 ff
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80)
lspci -x: 00: 02 10 76 43 05 00 30 02 80 8a 01 01 00 00 00 00
lspci -x: 10: 31 84 00 00 25 84 00 00 29 84 00 00 21 84 00 00
lspci -x: 20: 11 84 00 00 00 00 00 00 00 00 00 00 79 11 00 ff
lspci -x: 30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
lspci -x: 00: 02 10 77 43 0f 00 20 02 80 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 00 ff
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
lspci -x: 00: 02 10 71 43 07 00 a0 02 80 01 04 06 00 40 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 04 04 40 a1 a1 80 22
lspci -x: 20: 20 d0 20 d0 00 10 f0 11 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00
lspci -x:
lspci -x: 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 80)
lspci -x: 00: 02 10 70 43 17 00 30 04 80 00 01 04 08 40 80 00
lspci -x: 10: 00 74 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 00 ff
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 02 00
lspci -x:
lspci -x: 00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 80)
lspci -x: 00: 02 10 78 43 13 00 30 04 80 00 03 07 08 40 80 00
lspci -x: 10: 00 78 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 01 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 02 00
lspci -x:
lspci -x: 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
lspci -x: 00: 02 10 62 5a 07 00 b0 02 00 00 00 03 08 42 00 00
lspci -x: 10: 08 00 00 d8 01 90 00 00 00 00 10 d0 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 00 ff
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 08 00
lspci -x:
lspci -x: 04:02.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)
lspci -x: 00: 8c 16 1a 00 16 00 90 02 01 00 00 02 08 50 00 00
lspci -x: 10: 00 00 20 d0 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 01 50 00 00 4f 14 94 70
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 0a 1c
lspci -x:
lspci -x: 04:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
lspci -x: 00: 24 15 10 14 07 00 10 02 01 00 07 06 20 a8 02 00
lspci -x: 10: 00 10 21 d0 a0 00 00 02 04 05 08 b0 00 00 00 10
lspci -x: 20: 00 f0 ff 11 00 00 00 12 00 f0 ff 13 00 a4 00 00
lspci -x: 30: fc a4 00 00 00 a8 00 00 fc a8 00 00 ff 01 c0 05
lspci -x: 40: 79 11 00 ff 01 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 04:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
lspci -x: 00: ec 10 39 81 07 00 90 02 10 00 00 02 00 40 00 00
lspci -x: 10: 01 a0 00 00 00 00 21 d0 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 00 ff
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 20 40
lspci -x:
lsmod: Module Size Used by
lsmod: qnx4 10612 0
lsmod: ntfs 189580 0
lsmod: xfs 483476 0
lsmod: exportfs 5248 1 xfs
lsmod: jfs 158556 0
lsmod: pcmcia 35132 0
lsmod: firmware_class 9728 1 pcmcia
lsmod: 8139too 24448 0
lsmod: 8139cp 19712 0
lsmod: mii 5248 2 8139too,8139cp
lsmod: nls_iso8859_1 4224 2
lsmod: nls_cp437 5888 1
lsmod: sd_mod 16528 1
lsmod: loop 14216 2
lsmod: vfat 11520 1
lsmod: fat 46876 1 vfat
lsmod: reiserfs 218352 0
lsmod: ext3 115976 1
lsmod: jbd 46996 1 ext3
lsmod: isofs 32192 1
lsmod: ide_generic 1408 0 [permanent]
lsmod: aec62xx 6784 0 [permanent]
lsmod: alim15x3 11024 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: cmd64x 10012 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7812 0 [permanent]
lsmod: ns87415 4268 0 [permanent]
lsmod: opti621 4100 0 [permanent]
lsmod: pdc202xx_new 8064 0 [permanent]
lsmod: pdc202xx_old 9600 0 [permanent]
lsmod: piix 9092 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 11008 0 [permanent]
lsmod: sis5513 12300 0 [permanent]
lsmod: slc90e66 5120 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 4100 0 [permanent]
lsmod: via82cxxx 8196 0 [permanent]
lsmod: vga16fb 11528 2
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28364 0
lsmod: usbhid 32352 0
lsmod: usbkbd 6656 0
lsmod: thermal 13192 0
lsmod: processor 21952 1 thermal
lsmod: fan 4740 0
lsmod: usb_storage 69696 1
lsmod: scsi_mod 122444 2 sd_mod,usb_storage
lsmod: ide_cd 35488 0
lsmod: cdrom 32176 1 ide_cd
lsmod: ide_disk 14976 3
lsmod: atiixp 5392 0 [permanent]
lsmod: ehci_hcd 27144 0
lsmod: ohci_hcd 17412 0
lsmod: generic 4356 0 [permanent]
lsmod: usbcore 111008 7 usbserial,usbhid,usbkbd,usb_storage,ehci_hcd,ohci_hcd
lsmod: ide_core 111280 30 ide_generic,aec62xx,alim15x3,amd74xx,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,ide_disk,atiixp,generic
lsmod: yenta_socket 24076 1
lsmod: rsrc_nonstatic 12160 1 yenta_socket
lsmod: pcmcia_core 37392 3 pcmcia,yenta_socket,rsrc_nonstatic
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 95348 452 94896 0% /dev
df: tmpfs 95348 452 94896 0% /dev
df: tmpfs 95348 452 94896 0% /.dev
df: /dev/discs/disc1/disc 244480 160764 83716 66% /hd-media
df: /dev/loop/0 141966 141966 0 100% /cdrom
df: /dev/ide/host0/bus0/target0/lun0/part2 18840844 2345108 16304324 13% /target
free: total used free shared buffers
free: Mem: 190696 173484 17212 0 8548
free: Swap: 401616 556 401060
free: Total: 592312 174040 418272
cardctl status: Socket 0:
cardctl status: no card
cardctl ident: Socket 0:
cardctl ident: no product info available
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 35: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 13
/proc/cpuinfo: model name : Intel(R) Celeron(R) M processor 1.60GHz
/proc/cpuinfo: stepping : 8
/proc/cpuinfo: cpu MHz : 1596.301
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe
/proc/cpuinfo: bogomips : 3201.91
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0220-022f : pnp 00:08
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 040b-040b : pnp 00:08
/proc/ioports: 04d0-04d1 : pnp 00:08
/proc/ioports: 1080-1080 : motherboard
/proc/ioports: 1080-1080 : pnp 00:08
/proc/ioports: 8000-805f : motherboard
/proc/ioports: 8000-8003 : PM1a_EVT_BLK
/proc/ioports: 8004-8005 : PM1a_CNT_BLK
/proc/ioports: 8008-800b : PM_TMR
/proc/ioports: 8010-8015 : ACPI CPU throttle
/proc/ioports: 8020-8027 : GPE0_BLK
/proc/ioports: 8100-8100 : PM2_CNT_BLK
/proc/ioports: 8104-8107 : PM1b_EVT_BLK
/proc/ioports: 8400-840f : 0000:00:14.0
/proc/ioports: 8410-841f : 0000:00:14.1
/proc/ioports: 8410-8417 : ide0
/proc/ioports: 8418-841f : ide1
/proc/ioports: 9000-9fff : PCI Bus #01
/proc/ioports: 9000-90ff : 0000:01:05.0
/proc/ioports: a000-afff : PCI Bus #04
/proc/ioports: a000-a0ff : 0000:04:06.0
/proc/ioports: a000-a0ff : 8139too
/proc/ioports: a400-a4ff : PCI CardBus #05
/proc/ioports: a800-a8ff : PCI CardBus #05
/proc/iomem: 00000000-0009dfff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009e000-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cefff : Video ROM
/proc/iomem: 000cf000-000cffff : Adapter ROM
/proc/iomem: 000dc000-000dffff : reserved
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-0be8ffff : System RAM
/proc/iomem: 00100000-00273102 : Kernel code
/proc/iomem: 00273103-00301c23 : Kernel data
/proc/iomem: 0be90000-0be9bfff : ACPI Tables
/proc/iomem: 0be9c000-0befffff : ACPI Non-volatile Storage
/proc/iomem: 0bf00000-0bffffff : reserved
/proc/iomem: 10000000-11ffffff : PCI Bus #04
/proc/iomem: 10000000-11ffffff : PCI CardBus #05
/proc/iomem: 12000000-13ffffff : PCI CardBus #05
/proc/iomem: d0004000-d0004fff : 0000:00:13.0
/proc/iomem: d0004000-d0004fff : ohci_hcd
/proc/iomem: d0005000-d0005fff : 0000:00:13.1
/proc/iomem: d0005000-d0005fff : ohci_hcd
/proc/iomem: d0006000-d0006fff : 0000:00:13.2
/proc/iomem: d0006000-d0006fff : ehci_hcd
/proc/iomem: d0007000-d00073ff : 0000:00:14.0
/proc/iomem: d0007400-d00074ff : 0000:00:14.5
/proc/iomem: d0007800-d00078ff : 0000:00:14.6
/proc/iomem: d0100000-d01fffff : PCI Bus #01
/proc/iomem: d0100000-d010ffff : 0000:01:05.0
/proc/iomem: d0120000-d013ffff : 0000:01:05.0
/proc/iomem: d0200000-d02fffff : PCI Bus #04
/proc/iomem: d0200000-d020ffff : 0000:04:02.0
/proc/iomem: d0210000-d02100ff : 0000:04:06.0
/proc/iomem: d0210000-d02100ff : 8139too
/proc/iomem: d0211000-d0211fff : 0000:04:04.0
/proc/iomem: d0211000-d0211fff : yenta_socket
/proc/iomem: d8000000-dfffffff : PCI Bus #01
/proc/iomem: d8000000-dfffffff : 0000:01:05.0
/proc/iomem: fec00000-fec0ffff : reserved
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: fff80000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 2720134 local-APIC-edge timer
/proc/interrupts: 1: 1222 IO-APIC-edge i8042
/proc/interrupts: 14: 149016 IO-APIC-edge ide0
/proc/interrupts: 15: 203 IO-APIC-edge ide1
/proc/interrupts: 169: 0 IO-APIC-level acpi
/proc/interrupts: 177: 1 IO-APIC-level yenta
/proc/interrupts: 209: 11226 IO-APIC-level ohci_hcd:usb1, ohci_hcd:usb2, ehci_hcd:usb3
/proc/interrupts: 217: 538151 IO-APIC-level eth0
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 2720016
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 190696 kB
/proc/meminfo: MemFree: 17012 kB
/proc/meminfo: Buffers: 8548 kB
/proc/meminfo: Cached: 128648 kB
/proc/meminfo: SwapCached: 76 kB
/proc/meminfo: Active: 89536 kB
/proc/meminfo: Inactive: 63956 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 190696 kB
/proc/meminfo: LowFree: 17012 kB
/proc/meminfo: SwapTotal: 401616 kB
/proc/meminfo: SwapFree: 401064 kB
/proc/meminfo: Dirty: 3952 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 17800 kB
/proc/meminfo: Slab: 15784 kB
/proc/meminfo: CommitLimit: 496964 kB
/proc/meminfo: Committed_AS: 20004 kB
/proc/meminfo: PageTables: 232 kB
/proc/meminfo: VmallocTotal: 1105616 kB
/proc/meminfo: VmallocUsed: 4184 kB
/proc/meminfo: VmallocChunk: 1100832 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.34 present.
dmidecode: 30 structures occupying 1165 bytes.
dmidecode: Table at 0x000DC010.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: TOSHIBA
dmidecode: Version: V1.60
dmidecode: Release Date: 02/14/2006
dmidecode: Address: 0xE6C40
dmidecode: Runtime Size: 103360 bytes
dmidecode: ROM Size: 1024 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PC Card (PCMCIA) is supported
dmidecode: PNP is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: Smart battery is supported
dmidecode: BIOS boot specification is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: TOSHIBA
dmidecode: Product Name: Satellite M55
dmidecode: Version: PSM53U-02H00X
dmidecode: Serial Number: 46185935K
dmidecode: UUID: 29A5D2E0-B87D-11DA-A345-000FB0E2CE69
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: TOSHIBA
dmidecode: Product Name: HAZ00/HTW01
dmidecode: Version: Null
dmidecode: Serial Number: 0123456789AB
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: TOSHIBA
dmidecode: Type: Notebook
dmidecode: Lock: Not Present
dmidecode: Version: N/A
dmidecode: Serial Number: None
dmidecode: Asset Tag: *
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Safe
dmidecode: Security Status: None
dmidecode: OEM Information: 0x00001234
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: U1
dmidecode: Type: Central Processor
dmidecode: Family: Unknown
dmidecode: Manufacturer: Intel
dmidecode: ID: D8 06 00 00 FF FB E9 AF
dmidecode: Version: Intel(R) Celeron(R) M processor
dmidecode: Voltage: 3.3 V
dmidecode: External Clock: Unknown
dmidecode: Max Speed: 2000 MHz
dmidecode: Current Speed: 1600 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Slot 1
dmidecode: L1 Cache Handle: 0x0005
dmidecode: L2 Cache Handle: 0x0006
dmidecode: L3 Cache Handle: Not Provided
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1 Cache
dmidecode: Configuration: Enabled, Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 32 KB
dmidecode: Maximum Size: 32 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Pipeline Burst
dmidecode: Asynchronous
dmidecode: Installed SRAM Type: Asynchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2 Cache
dmidecode: Configuration: Enabled, Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 1024 KB
dmidecode: Maximum Size: 1024 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Pipeline Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x0007, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: JP1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: SVGA-Out
dmidecode: External Connector Type: DB-15 female
dmidecode: Port Type: Video Port
dmidecode:
dmidecode: Handle 0x0008, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: JP7
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: S-Video
dmidecode: External Connector Type: Mini DIN
dmidecode: Port Type: Video Port
dmidecode:
dmidecode: Handle 0x0009, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: JP14
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x000A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: JP18
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: MIC_IN
dmidecode: External Connector Type: RJ-11
dmidecode: Port Type: MIDI Port
dmidecode:
dmidecode: Handle 0x000B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: JP17
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: HEADPHONE
dmidecode: External Connector Type: RJ-11
dmidecode: Port Type: MIDI Port
dmidecode:
dmidecode: Handle 0x000C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: JP2
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Telephone Line
dmidecode: External Connector Type: RJ-11
dmidecode: Port Type: Modem Port
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: JP2
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Network
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x000E, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: TI PCI1410
dmidecode: Type: 32-bit PC Card (PCMCIA)
dmidecode: Current Usage: Unknown
dmidecode: Length: Other
dmidecode: ID: Adapter 0, Socket 0
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PC Card-16 is supported
dmidecode: Cardbus is supported
dmidecode: Hot-plug devices are supported
dmidecode:
dmidecode: Handle 0x000F, DMI type 10, 8 bytes
dmidecode: On Board Device 1 Information
dmidecode: Type: Sound
dmidecode: Status: Disabled
dmidecode: Description: Realtek ACL250
dmidecode: On Board Device 2 Information
dmidecode: Type: Ethernet
dmidecode: Status: Disabled
dmidecode: Description: Realtek RTL8100L
dmidecode:
dmidecode: Handle 0x0010, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: PSM53U-02H00X,U02H00X002,11V
dmidecode:
dmidecode: Handle 0x0011, DMI type 12, 5 bytes
dmidecode: System Configuration Options
dmidecode:
dmidecode: Handle 0x0012, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 1 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x0013, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0012
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: 1
dmidecode: Locator: J400
dmidecode: Bank Locator: Channel A0
dmidecode: Type: DRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Not Specified
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x0014, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0012
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: 2
dmidecode: Locator: J401
dmidecode: Bank Locator: Channel A1
dmidecode: Type: DRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Not Specified
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x0015, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0012
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: 3
dmidecode: Locator: J501
dmidecode: Bank Locator: Channel B0
dmidecode: Type: DRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Not Specified
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x0016, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0012
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 256 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: 4
dmidecode: Locator: J500
dmidecode: Bank Locator: Channel B1
dmidecode: Type: DRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Not Specified
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x0017, DMI type 18, 23 bytes
dmidecode: 32-bit Memory Error Information
dmidecode: Type: OK
dmidecode: Granularity: Unknown
dmidecode: Operation: Unknown
dmidecode: Vendor Syndrome: Unknown
dmidecode: Memory Array Address: Unknown
dmidecode: Device Address: Unknown
dmidecode: Resolution: Unknown
dmidecode:
dmidecode: Handle 0x0018, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0000FFFFFFF
dmidecode: Range Size: 256 MB
dmidecode: Physical Array Handle: 0x0012
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x0019, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x0013
dmidecode: Memory Array Mapped Address Handle: 0x0018
dmidecode: Partition Row Position: 2
dmidecode: Interleave Position: 1
dmidecode: Interleaved Data Depth: 6
dmidecode:
dmidecode: Handle 0x001A, DMI type 22, 26 bytes
dmidecode: Portable Battery
dmidecode: Location: 1st Battery
dmidecode: Manufacturer: TOSHIBA
dmidecode: Manufacture Date: 08/25/2005
dmidecode: Serial Number: 3658Q
dmidecode: Name: PA3457U
dmidecode: Chemistry: Lithium Ion
dmidecode: Design Capacity: 31500 mWh
dmidecode: Design Voltage: 14800 mV
dmidecode: SBDS Version: Not Specified
dmidecode: Maximum Error: Unknown
dmidecode: OEM-specific Information: 0x00000000
dmidecode:
dmidecode: Handle 0x001B, DMI type 32, 20 bytes
dmidecode: System Boot Information
dmidecode: Status: <OUT OF SPEC>
dmidecode:
dmidecode: Handle 0x001C, DMI type 126, 4 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x001D, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: usb-storage-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: USB storage support
Package: loop-modules-2.6.16-2-486-di
Status: install ok installed
Version: 1.33
Provides: loop-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Loopback filesystem support
Package: scsi-common-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-common-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di
Description: Very common SCSI drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.17
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.22
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6-15
Description: GNU C Library: NSS helper for DNS - udeb
Package: lowmemcheck
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: ext3-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: ext3-modules
Depends: kernel-image-2.6.16-2-486-di
Description: EXT3 filesystem support
Package: cdrom-retriever
Status: install ok installed
Version: 1.11
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.42), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.32
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42), cdebconf-udeb (>= 0.97)
Description: Miscellaneous utilities for the debian installer
Package: serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: serial-modules
Depends: kernel-image-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Description: Serial drivers
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: ide-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: ide-core-modules
Depends: kernel-image-2.6.16-2-486-di
Description: IDE support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.33
Depends: di-utils (>= 1.24)
Description: Skeleton root filesystem used by debian-installer
Package: pcmcia-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: pcmcia-modules
Depends: kernel-image-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Description: Common PCMCIA drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.093-1
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: scsi-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-core-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Core SCSI subsystem
Package: iso-scan
Status: install ok installed
Version: 1.15
Provides: cdrom-detect
Depends: hw-detect, loop-modules
Description: Scan hard drives for an installer ISO image
Installer-Menu-Item: 13
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-3
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: scsi-extra-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-extra-modules
Depends: scsi-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Description: Uncommon SCSI drivers
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-3
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: usb-discover
Status: install ok unpacked
Version: 1.05
Description: Discover USB and load kernel modules
Package: load-iso
Status: install ok installed
Version: 1.15
Depends: iso-scan, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from an installer ISO
Installer-Menu-Item: 16
Package: rescue-check
Status: install ok unpacked
Version: 1.4
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.12-2
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.1-1)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.104+b1
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: iso-3166-udeb
Status: install ok installed
Version: 0.52-1
Description: provides iso_3166.tab file
Package: cdrom-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: cdrom-core-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, ide-modules-2.6.16-2-486-di
Description: CDROM support
Package: fat-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fat-modules
Depends: kernel-image-2.6.16-2-486-di
Description: FAT filesystem support
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-2
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.17
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.40
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43)
Description: Hardware architecture detector
Package: fb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Frame buffer support
Package: save-logs
Status: install ok unpacked
Version: 2.17
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.32
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.24
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: kernel-image-2.6.16-2-486-di
Status: install ok installed
Version: 1.33
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: ide-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: ide-modules
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di
Description: IDE drivers
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.1-2
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.0-2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: input-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: input-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: Input devices support
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.32
Description: Terminfo entries needed by newt/slang in debian installer
Package: scsi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, parport-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Description: SCSI drivers
Package: hw-detect
Status: install ok installed
Version: 1.40
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.29
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.43
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: acpi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: acpi-modules
Depends: kernel-image-2.6.16-2-486-di
Description: ACPI support modules
Package: firmware-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: firmware-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Firmware request modules
Package: sata-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: sata-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Description: SATA drivers
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.17
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.6
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.104
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: file-preseed
Status: install ok unpacked
Version: 1.17
Depends: di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: usb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: USB support
Package: usb-serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-serial-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: USB serial drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.104+b1
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: reiserfs-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: reiserfs-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Reiser filesystem support
Package: parport-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: parport-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Parallel port support
Package: debian-installer
Status: install ok installed
Version: hd-media-2.6-20060806
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: cdrom-detect
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: choose-mirror-bin
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: apt-mirror-setup, base-installer (>= 1.49)
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.64
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.4
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.6-6), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.04
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: crypto-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: crypto-modules
Description: crypto modules
This package contains crypto modules.
Package: cryptsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 400
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Version: 2:1.0.3-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2), libpopt0-udeb (>= 1.10), libuuid1-udeb, dmsetup-udeb
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: dmsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 352
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.6
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76
Package: ethdetect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: ethernet-card-detection
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-10
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.4
Depends: archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: firewire-core-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 196
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: scsi-core-modules-2.6.16-2-486-di, kernel-image-2.6.16-2-486-di
Provides: firewire-core-modules
Description: Core FireWire drivers
This package contains core FireWire drivers for the Linux kernel.
Package: gnupg-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 664
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.3-2
Depends: libc6 (>= 2.3.6-6), libusb-0.1-udeb (>= 2:0.1.12), zlib1g-udeb (>= 1:1.2.1)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1592
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6-15
Provides: libc6, libc-udeb, glibc-2.3.6-2, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libiw28-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 24
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libpopt0-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Paul Martin <pm@debian.org>
Version: 1.10-2
Depends: libc6 (>= 2.3.6-6)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
.
This is a minimal package for use in debian-installer.
Package: libsysfs2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Martin Pitt <mpitt@debian.org>
Version: 2.0.0-7
Depends: libc6 (>= 2.3.6-6)
Provides: libsysfs2
Description: interface library to sysfs
Sysfs is a virtual file system in Linux kernel 2.5+ that provides a
tree of system devices. libsysfs provides a stable programming
interface to sysfs and eases querying system devices and their
attributes.
.
This is a minimal package for use in debian-installer.
Package: libusb-0.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Aurelien Jarno <aurel32@debian.org>
Version: 2:0.1.12-2
Depends: libc6 (>= 2.3.5-1)
Provides: libusb-0.1-4
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
More information can be found at the Linux USB web site
http://www.linux-usb.org/ .
.
This is a minimal package for use in debian-installer.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 20
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-aes-2.6.16-2-486-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 148
Maintainer: Max Vozeler <xam@debian.org>
Version: 3.1d+3+3
Depends: kernel-image-2.6.16-2-486-di, mount-aes-udeb (>= 2.12p-1)
Provides: loop-aes-modules
Description: loop-AES encryption modules for kernel 2.6.16-2-486-di
This package contains the loop-AES loadable Linux kernel modules
compiled for kernel 2.6.16-2-486-di
.
loop-AES can be used to encrypt disk partitions, removable media,
swap space and other devices. It provides measures to strengthen
the encryption: Passphrase seeds, multiple hash iterations, MD5 IV
and use of alternating encryption keys.
.
Encryption keys can be stored in a GnuPG-encrypted keyfile, which
allows the passphrase to be changed without re-encryption. Keyfiles
can also be encrypted asymmetrically for multi-user access.
.
This package includes the cipher modules blowfish, twofish and
serpent in addition to the default cipher (AES).
.
If you compiled a custom kernel, you will most likely need to
compile a custom version of these modules as well. The package
loop-aes-source has been provided for this purpose.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 396
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-2
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 140
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.2-7
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices (software RAID), as well as multipath devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-3
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: mount-aes-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 216
Maintainer: Max Vozeler <xam@debian.org>
Version: 2.12r-13
Depends: libblkid1-udeb (>= 1.37-1), libc6 (>= 2.3.6-6), libuuid1-udeb
Description: Mount utils for loop-AES
loop-AES patched mount, losetup and swapon
Package: netcfg
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 788
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Provides: configured-network
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
Installer-Menu-Item: 18
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2648
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, crc-modules-2.6.16-2-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, firewire-core-modules-2.6.16-2-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 588
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, nic-extra-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfstools-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 164
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.12.1-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 656
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 54
Depends: di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base (>= 73), partman-auto (>= 51), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 836
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 92
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 564
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 692
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-base (>= 87), partman-crypto-dm, partman-crypto-loop, cdebconf-newt-entropy (>= 0.3), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-crypto-dm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, crypto-modules, cryptsetup-udeb
Description: Add to partman support for dm-crypt encryption
Package: partman-crypto-loop
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, loop-aes-modules, mount-aes-udeb, gnupg-udeb
Description: Add to partman support for loop-AES encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 10
Depends: partman-base
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 252
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 616
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 40
Depends: ntfstools-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 228
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-8
Description: PCMCIA Card Services for Linux (udeb)
Package: pcmcia-storage-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Provides: pcmcia-storage-modules
Description: PCMCIA storage drivers
This package contains PCMCIA storage drivers for the Linux kernel.
Package: pcmciautils-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 52
Maintainer: Colin Watson <cjwatson@debian.org>
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
This package provides PCMCIA initialisation tools for Linux 2.6.13-rc1 or
later, replacing the old pcmcia-cs tools used with earlier kernel versions.
PCMCIA cards are commonly used in laptops to provide expanded capabilities
such as network connections, modems, increased memory, etc.
.
To use PCMCIA you need to have kernel modules available to support it.
These are included in the stock Debian 2.6 kernel packages.
.
This is a minimal package for use in debian-installer.
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.07.1
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 580
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.4-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: ntfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii reportbug 3.29.5 reports bugs in the Debian distrib
-- no debconf information
--
see shy jo
--- End Message ---