--- Begin Message ---
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Installer supplied with Debian 3.1 (Sarge)
from edmunds-enterprises.com, files dated 06/07/2005 on two DVDs
uname -a: Linux EAK1 2.4.27-2-686 #1 Mon May 16 17:03:22 JST 2005 i686
Date: Installed over several days Sept 2005
Method: Booted from DVD, used installer, auto run
Machine: Self built with Albatron PX845E Pro II motherboard (mostly
Intel chip set)
Processor: Pentium IV 2.4 GHz
Memory: 1GB
Root Device: IDE Maxtor 40 GB, hda
Root Size 20 GB
Output of lspci and lspci -n:
for lspci:
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host
Bridge (rev 11)
0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP
Bridge (rev 11)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB
2.0 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC
Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L)
UltraATA-100 IDE Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200
QL [Radeon 8500 LE]
0000:02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (CNR)
Ethernet Controller (rev 81)
for lspci-n:
0000:00:00.0 0600: 8086:1a30 (rev 11)
0000:00:01.0 0604: 8086:1a31 (rev 11)
0000:00:1d.0 0c03: 8086:24c2 (rev 01)
0000:00:1d.1 0c03: 8086:24c4 (rev 01)
0000:00:1d.2 0c03: 8086:24c7 (rev 01)
0000:00:1d.7 0c03: 8086:24cd (rev 01)
0000:00:1e.0 0604: 8086:244e (rev 81)
0000:00:1f.0 0601: 8086:24c0 (rev 01)
0000:00:1f.1 0101: 8086:24cb (rev 01)
0000:00:1f.3 0c05: 8086:24c3 (rev 01)
0000:00:1f.5 0401: 8086:24c5 (rev 01)
0000:01:00.0 0300: 1002:514c
0000:02:08.0 0200: 8086:103a (rev 81)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
For the most part, installation was very smooth. One problem was that
the resolution choices are too coarse for my monitor; I need to go back
and try to change this. So far this had not been obvious, as I can get
back to the screen giving me a choice, but the choices do not match what
I have. One good point: even the sound seems to have been set up. It has
been a great help that I have replaceable hard drives (dock mounted) so
I can change them out when needed.
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Installer supplied with Debian 3.1 (Sarge) from edmunds-enterprises.com, files dated 06/07/2005 on two DVDs
uname -a: Linux EAK1 2.4.27-2-686 #1 Mon May 16 17:03:22 JST 2005 i686
Date: Installed over several days Sept 2005
Method: Booted from DVD, used installer, auto run
Machine: Self built with Albatron PX845E Pro II motherboard (mostly Intel chip set)
Processor: Pentium IV 2.4 GHz
Memory: 1GB
Root Device: IDE Maxtor 40 GB, hda
Root Size 20 GB
Output of lspci and lspci -n:
for lspci:
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 11)
0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 11)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) UltraATA-100 IDE Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE]
0000:02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (CNR) Ethernet Controller (rev 81)
for lspci-n:
0000:00:00.0 0600: 8086:1a30 (rev 11)
0000:00:01.0 0604: 8086:1a31 (rev 11)
0000:00:1d.0 0c03: 8086:24c2 (rev 01)
0000:00:1d.1 0c03: 8086:24c4 (rev 01)
0000:00:1d.2 0c03: 8086:24c7 (rev 01)
0000:00:1d.7 0c03: 8086:24cd (rev 01)
0000:00:1e.0 0604: 8086:244e (rev 81)
0000:00:1f.0 0601: 8086:24c0 (rev 01)
0000:00:1f.1 0101: 8086:24cb (rev 01)
0000:00:1f.3 0c05: 8086:24c3 (rev 01)
0000:00:1f.5 0401: 8086:24c5 (rev 01)
0000:01:00.0 0300: 1002:514c
0000:02:08.0 0200: 8086:103a (rev 81)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
For the most part, installation was very smooth. One problem was that the resolution choices are too coarse for my monitor; I need to go back and try to change this. So far this had not been obvious, as I can get back to the screen giving me a choice, but the choices do not match what I have. One good point: even the sound seems to have been set up. It has been a great help that I have replaceable hard drives (dock mounted) so I can change them out when needed.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---