[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#311856: marked as done (Install report)



Your message dated Wed, 08 Sep 2010 03:58:00 +0000
with message-id <E1OtBnM-0004iP-1O@ravel.debian.org>
and subject line Closing old installation report #311856
has caused the Debian Bug report #311856,
regarding Install report
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
311856: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=311856
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports

Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/amd64/current/debian-testing-amd64-netinst.iso
Date of image: 02-Jun-2005
uname -a:
Linux  2.6.8-11-amd64-generic #1 Wed May 4 20:03:43 UTC 2005 x86_64 unknown
Date: 03-June-2005
Method: NetInstall CD for AMD64

Machine: Custom machine
MSI K8N Neo4 Platinum mother board (nForce4)
Gigabyte nVidia GeForce 6600 TurboForce PCIe video card
Processor:
AMD Althlon 64 3200+
Memory:
2x512MB
Root Device:
IDE
Root Size/partition table:
Tried different things, failed with all.  Formatted ext2.
/dev/ide/host0/bus0/target0/lun0 # fdisk -l disc

Disk disc: 80.0 GB, 80054059008 bytes
16 heads, 63 sectors/track, 155114 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes

Device Boot      Start         End      Blocks   Id  System
 part1               1       19376     9765472+  83  Linux
 part2           19381       21707     1172745   82  Linux swap / Solaris
Partition 2 does not end on cylinder boundary.

Output of lspci and lspci -n:

/cdrom/pool/main/p/pciutils # lspci
0000:00:00.0 Memory controller: nVidia Corporation: Unknown device 005e (rev a3)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 0050 (rev a3)
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 0052 (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 005a (rev a2) 0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 005b (rev a3)
0000:00:06.0 IDE interface: nVidia Corporation: Unknown device 0053 (rev f2)
0000:00:07.0 IDE interface: nVidia Corporation: Unknown device 0054 (rev f3)
0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 0055 (rev f3)
0000:00:09.0 PCI bridge: nVidia Corporation: Unknown device 005c (rev a2)
0000:00:0a.0 Bridge: nVidia Corporation: Unknown device 0057 (rev a3)
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0c.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0d.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:05:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0141 (rev a2)

/cdrom/pool/main/p/pciutils # lspci -n
0000:00:00.0 0580: 10de:005e (rev a3)
0000:00:01.0 0601: 10de:0050 (rev a3)
0000:00:01.1 0c05: 10de:0052 (rev a2)
0000:00:02.0 0c03: 10de:005a (rev a2)
0000:00:02.1 0c03: 10de:005b (rev a3)
0000:00:06.0 0101: 10de:0053 (rev f2)
0000:00:07.0 0101: 10de:0054 (rev f3)
0000:00:08.0 0101: 10de:0055 (rev f3)
0000:00:09.0 0604: 10de:005c (rev a2)
0000:00:0a.0 0680: 10de:0057 (rev a3)
0000:00:0b.0 0604: 10de:005d (rev a3)
0000:00:0c.0 0604: 10de:005d (rev a3)
0000:00:0d.0 0604: 10de:005d (rev a3)
0000:00:0e.0 0604: 10de:005d (rev a3)
0000:05:00.0 0300: 10de:0141 (rev a2)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [E]
Install boot loader:    [ ]
Reboot:                 [ ]

Comments/Problems:

Install base System:
Freezes when installing kernel (kernel-image-2.6.8-11-amd64-generic (2.6.8-13)). From F3 it freezes shortly after saying "You are attempting to install a kernel version that is the same...Please Hit return to continue" with the added warning:

dpkg: warning, architecture `amd64' not in remapping table

Completely frozen at this point, power cycling is the only thing that works. Same results when booting off of the cd with "linux noapic nolapic apci=off" and various other combinations.


--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.



--- End Message ---

Reply to: