--- Begin Message ---
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 18.07.04
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/tc1/sarge-i386-businesscard.iso
uname -a: not possible,
Date: 18.07.04
Method: Installation over sarge businesscard tc1,CD-Rom, downloading from ftp.de.debian.org,no proxy
machine: amd k6-2 500mhz
Processor: amd k6-2 500mhz
Memory: 256mb-ram
Root Device: IDE
Root Size/partition table:
/dev/hdb1 487M 133M 328M 29% /mnt/hdb1
one partition no swap ext2
Output of lspci and lspci -n:
lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47)
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 02)
00:07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
00:12.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 256 (rev 10)
lspci -n:
00:00.0 Class 0600: 1106:0598 (rev 04)
00:01.0 Class 0604: 1106:8598
00:07.0 Class 0601: 1106:0586 (rev 47)
00:07.1 Class 0101: 1106:0571 (rev 06)
00:07.2 Class 0c03: 1106:3038 (rev 02)
00:07.3 Class 0600: 1106:3040 (rev 10)
00:12.0 Class 0200: 10b7:9055 (rev 30)
01:00.0 Class 0300: 10de:0100 (rev 10)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [E]
Comments/Problems:
Before this, I installed tc1 on the same machine on a 20gb-harddrive without any problems. After that I removed this harddrive and plugged an old 500mb-harddrive on ide0 slave. Masterdrive is not present.
CD-drive is on ide1 master.
After finishing the installation, it reboots, but reboots after pressing enter during the grub menu.
Same next reboot.
I filled out these log, by using knoppix.
____________________________________________________
Aufnehmen, abschicken, nah sein - So einfach ist
WEB.DE Video-Mail: http://freemail.web.de/?mc=021200
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---