--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-reports: initrd mounts wrong partition as /
- From: Greg Franklin <greg@filmsoc.warwick.ac.uk>
- Date: Tue, 27 Mar 2007 15:01:02 +0100
- Message-id: <20070327140102.3158.84118.reportbug@paramount.filmsoc.warwick.ac.uk>
Package: installation-reports
Version: D-I rc2
Severity: important
-- Package-specific info:
Boot method: Netinst CD
Image version: D-I rc2
Date: 27th March 2pm
Machine:
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/mapper/lvma-root
ext3 1032088 250548 729112 26% /
tmpfs tmpfs 258412 0 258412 0% /lib/init/rw
udev tmpfs 10240 48 10192 1% /dev
tmpfs tmpfs 258412 0 258412 0% /dev/shm
/dev/mapper/lvma-export
ext3 460144 10544 425844 3% /export
/dev/mapper/lvma-srv
ext3 5160576 141440 4756992 3% /srv
/dev/mapper/lvma-var
ext3 1032088 147252 832408 16% /var
Disk /dev/sda: 9184 MB, 9184760832 bytes
255 heads, 63 sectors/track, 1116 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 973 7815591 8e Linux LVM
/dev/sda2 974 1116 1148647+ 82 Linux swap / Solaris
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
The installation went with no problems. However, when booting into the
new system, the bootup fails with a missing /sbin/init error message and
I'm dropped into a prompt in the initrd.
Looking at /root I can see that /var has been mounted as /root.
I have to perform the following steps to finish the boot sequence.
umount /root
mount /dev/mapper/lvma-root /root
and all the steps from part way through /scripts/init-bottom/udev which
is where the first error message occured as /root/dev doesn't exist.
mount -n -o bind /dev/.static/dev /root/dev
mount -n -o move /dev /root/dev
nuke /dev
ln -s /root/dev /dev
mount -n -o move /sys /root/sys
mount -n -o move /proc /root/proc
exec /sbin/init 2 </root/dev/console >/root/dev/console
After that the system behaves normally.
/etc/lilo.conf correctly lists
root=/dev/mapper/lvma-root
And all partitions are correctly mounted once the system has booted.
The only thing that wasn't done from scratch during the installation is
that the volume group and the /var logical volume already existed from a
previous installation, so I opted to erase all the data on that
parition.
All other logical volumes were deleted and re-created.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux paramount 2.6.18-4-486 #1 Wed Feb 21 15:25:16 UTC 2007 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Broadcom CNB20HE Host Bridge [1166:0008] (rev 23)
lspci -nn: 00:00.1 PCI bridge [0604]: Broadcom CNB20LE Host Bridge [1166:0009] (rev 01)
lspci -nn: 00:00.2 Host bridge [0600]: Broadcom CNB20HE Host Bridge [1166:0006] (rev 01)
lspci -nn: 00:00.3 Host bridge [0600]: Broadcom CNB20HE Host Bridge [1166:0006] (rev 01)
lspci -nn: 00:04.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro 100] [8086:1229] (rev 08)
lspci -nn: 00:05.0 SCSI storage controller [0100]: Adaptec AIC-7899P U160/m [9005:00cf] (rev 01)
lspci -nn: 00:05.1 SCSI storage controller [0100]: Adaptec AIC-7899P U160/m [9005:00cf] (rev 01)
lspci -nn: 00:06.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro 100] [8086:1229] (rev 08)
lspci -nn: 00:0f.0 ISA bridge [0601]: Broadcom OSB4 South Bridge [1166:0200] (rev 50)
lspci -nn: 00:0f.1 IDE interface [0101]: Broadcom OSB4 IDE Controller [1166:0211]
lspci -nn: 00:0f.2 USB Controller [0c03]: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220] (rev 04)
lspci -nn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL AGP 2X [1002:474d] (rev 27)
lspci -vnn: 00:00.0 Host bridge [0600]: Broadcom CNB20HE Host Bridge [1166:0008] (rev 23)
lspci -vnn: Flags: fast devsel
lspci -vnn: Memory at fa000000 (32-bit, prefetchable) [disabled] [size=32M]
lspci -vnn: Memory at <ignored> (32-bit, non-prefetchable) [disabled]
lspci -vnn:
lspci -vnn: 00:00.1 PCI bridge [0604]: Broadcom CNB20LE Host Bridge [1166:0009] (rev 01)
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
lspci -vnn: I/O behind bridge: 0000b000-0000bfff
lspci -vnn: Memory behind bridge: fc500000-fe5fffff
lspci -vnn: Prefetchable memory behind bridge: fc200000-fc2fffff
lspci -vnn: Capabilities: [80] AGP version 2.0
lspci -vnn:
lspci -vnn: 00:00.2 Host bridge [0600]: Broadcom CNB20HE Host Bridge [1166:0006] (rev 01)
lspci -vnn: Flags: medium devsel
lspci -vnn:
lspci -vnn: 00:00.3 Host bridge [0600]: Broadcom CNB20HE Host Bridge [1166:0006] (rev 01)
lspci -vnn: Flags: medium devsel
lspci -vnn:
lspci -vnn: 00:04.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro 100] [8086:1229] (rev 08)
lspci -vnn: Subsystem: Intel Corporation Unknown device [8086:100c]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 185
lspci -vnn: Memory at fe9fb000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: I/O ports at c800 [size=64]
lspci -vnn: Memory at fe700000 (32-bit, non-prefetchable) [size=1M]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 00:05.0 SCSI storage controller [0100]: Adaptec AIC-7899P U160/m [9005:00cf] (rev 01)
lspci -vnn: Subsystem: Unknown device [9d15:0001]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 169
lspci -vnn: BIST result: 00
lspci -vnn: I/O ports at d000 [disabled] [size=256]
lspci -vnn: Memory at fe9fc000 (64-bit, non-prefetchable) [size=4K]
lspci -vnn: Expansion ROM at fe9a0000 [disabled] [size=128K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 00:05.1 SCSI storage controller [0100]: Adaptec AIC-7899P U160/m [9005:00cf] (rev 01)
lspci -vnn: Subsystem: Unknown device [9d15:0001]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177
lspci -vnn: BIST result: 00
lspci -vnn: I/O ports at d800 [disabled] [size=256]
lspci -vnn: Memory at fe9ff000 (64-bit, non-prefetchable) [size=4K]
lspci -vnn: Expansion ROM at fe9c0000 [disabled] [size=128K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 00:06.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro 100] [8086:1229] (rev 08)
lspci -vnn: Subsystem: Intel Corporation Unknown device [8086:100c]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 193
lspci -vnn: Memory at fe9fd000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: I/O ports at d400 [size=64]
lspci -vnn: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 00:0f.0 ISA bridge [0601]: Broadcom OSB4 South Bridge [1166:0200] (rev 50)
lspci -vnn: Subsystem: Broadcom OSB4 South Bridge [1166:0200]
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn:
lspci -vnn: 00:0f.1 IDE interface [0101]: Broadcom OSB4 IDE Controller [1166:0211] (prog-if 8a [Master SecP PriP])
lspci -vnn: Flags: bus master, medium devsel, latency 64
lspci -vnn: I/O ports at ffa0 [size=16]
lspci -vnn:
lspci -vnn: 00:0f.2 USB Controller [0c03]: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220] (rev 04) (prog-if 10)
lspci -vnn: Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 10
lspci -vnn: Memory at fe9fe000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn:
lspci -vnn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL AGP 2X [1002:474d] (rev 27)
lspci -vnn: Subsystem: ATI Technologies Inc Unknown device [1002:0008]
lspci -vnn: Flags: bus master, stepping, medium devsel, latency 64, IRQ 11
lspci -vnn: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: I/O ports at b800 [size=256]
lspci -vnn: Memory at fe4ff000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Expansion ROM at fe4c0000 [disabled] [size=128K]
lspci -vnn: Capabilities: [50] AGP version 1.0
lspci -vnn: Capabilities: [5c] Power Management version 2
lspci -vnn:
modulemap: 8086:1229 e100
modulemap: 9005:00cf aic7xxx
modulemap: 9005:00cf aic7xxx
modulemap: 8086:1229 e100
modulemap: 1166:0211 serverworks
modulemap: 1166:0220 ohci_hcd
lsmod: Module Size Used by
lsmod: qnx4 10612 0
lsmod: ntfs 184084 0
lsmod: dm_mod 48952 9
lsmod: xfs 464756 0
lsmod: reiserfs 210432 0
lsmod: jfs 156380 0
lsmod: ext3 116488 4
lsmod: jbd 47272 1 ext3
lsmod: vfat 11392 0
lsmod: fat 45596 1 vfat
lsmod: e100 32008 0
lsmod: mii 5376 1 e100
lsmod: nls_iso8859_1 4096 0
lsmod: rsrc_nonstatic 11648 0
lsmod: pcmcia_core 35856 1 rsrc_nonstatic
lsmod: isofs 31544 0
lsmod: ide_disk 14720 0
lsmod: ide_generic 1280 0 [permanent]
lsmod: pdc202xx_new 7808 0 [permanent]
lsmod: aec62xx 6656 0 [permanent]
lsmod: alim15x3 11020 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5776 0 [permanent]
lsmod: cmd64x 9884 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7684 0 [permanent]
lsmod: jmicron 4096 0 [permanent]
lsmod: ns87415 4168 0 [permanent]
lsmod: opti621 3972 0 [permanent]
lsmod: pdc202xx_old 9344 0 [permanent]
lsmod: piix 9092 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6528 0 [permanent]
lsmod: siimage 10880 0 [permanent]
lsmod: sis5513 12296 0 [permanent]
lsmod: slc90e66 4992 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 3972 0 [permanent]
lsmod: via82cxxx 8324 0 [permanent]
lsmod: usb_storage 70848 0
lsmod: vga16fb 11148 2
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28136 0
lsmod: usbhid 35552 0
lsmod: usbkbd 6656 0
lsmod: thermal 13320 0
lsmod: processor 23212 1 thermal
lsmod: fan 4740 0
lsmod: ide_cd 35360 0
lsmod: cdrom 32160 1 ide_cd
lsmod: generic 5380 0 [permanent]
lsmod: sd_mod 18832 3
lsmod: floppy 51748 0
lsmod: parport_pc 31268 0
lsmod: parport 31816 1 parport_pc
lsmod: ohci_hcd 17284 0
lsmod: usbcore 108676 6 usb_storage,usbserial,usbhid,usbkbd,ohci_hcd
lsmod: serverworks 8328 0 [permanent]
lsmod: ide_core 107248 31 ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,jmicron,ns87415,opti621,pdc202xx_old,piix,rz1000,sc1200,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,generic,serverworks
lsmod: aic7xxx 153428 2
lsmod: scsi_transport_spi 22016 1 aic7xxx
lsmod: scsi_mod 121352 4 usb_storage,sd_mod,aic7xxx,scsi_transport_spi
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 258488 408 258080 0% /dev
df: tmpfs 258488 408 258080 0% /dev
df: tmpfs 258488 408 258080 0% /.dev
df: /dev/mapper/lvma-root 1032088 222884 756776 23% /target
df: /dev/mapper/lvma-export 460144 10544 425844 2% /target/export
df: /dev/mapper/lvma-srv 5160576 141440 4756992 3% /target/srv
df: /dev/mapper/lvma-var 1032088 125744 853916 13% /target/var
free: total used free shared buffers
free: Mem: 516980 383988 132992 0 27304
free: Swap: 1148636 0 1148636
free: Total: 1665616 383988 1281628
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 8
/proc/cpuinfo: model name : Pentium III (Coppermine)
/proc/cpuinfo: stepping : 6
/proc/cpuinfo: cpu MHz : 866.306
/proc/cpuinfo: cache size : 256 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
/proc/cpuinfo: bogomips : 1733.50
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 040b-040b : pnp 00:02
/proc/ioports: 04d0-04d1 : pnp 00:02
/proc/ioports: 04d6-04d6 : pnp 00:02
/proc/ioports: 0500-0503 : ACPI PM1a_EVT_BLK
/proc/ioports: 0504-0505 : ACPI PM1b_CNT_BLK
/proc/ioports: 0508-050b : ACPI PM_TMR
/proc/ioports: 050c-0511 : ACPI CPU throttle
/proc/ioports: 0514-051b : ACPI GPE0_BLK
/proc/ioports: 0540-0543 : ACPI PM1b_EVT_BLK
/proc/ioports: 0544-0545 : ACPI PM1a_CNT_BLK
/proc/ioports: 0550-0557 : ACPI GPE1_BLK
/proc/ioports: 0778-077a : parport0
/proc/ioports: 0c14-0c14 : pnp 00:02
/proc/ioports: 0c49-0c49 : pnp 00:02
/proc/ioports: 0c52-0c52 : pnp 00:02
/proc/ioports: 0c6c-0c6c : pnp 00:02
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: b000-bfff : PCI Bus #01
/proc/ioports: b800-b8ff : 0000:01:00.0
/proc/ioports: c800-c83f : 0000:00:04.0
/proc/ioports: c800-c83f : e100
/proc/ioports: d000-d0ff : 0000:00:05.0
/proc/ioports: d400-d43f : 0000:00:06.0
/proc/ioports: d400-d43f : e100
/proc/ioports: d800-d8ff : 0000:00:05.1
/proc/ioports: ffa0-ffaf : 0000:00:0f.1
/proc/ioports: ffa0-ffa7 : ide0
/proc/ioports: ffa8-ffaf : ide1
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000c8000-000c8fff : Adapter ROM
/proc/iomem: 000c9000-000cefff : Adapter ROM
/proc/iomem: 000cf000-000cffff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-1ffeffff : System RAM
/proc/iomem: 00100000-00277829 : Kernel code
/proc/iomem: 0027782a-0030dc73 : Kernel data
/proc/iomem: 1fff0000-1fffefff : ACPI Tables
/proc/iomem: 1ffff000-1fffffff : ACPI Non-volatile Storage
/proc/iomem: fa000000-fbffffff : 0000:00:00.0
/proc/iomem: fc200000-fc2fffff : PCI Bus #01
/proc/iomem: fc500000-fe5fffff : PCI Bus #01
/proc/iomem: fd000000-fdffffff : 0000:01:00.0
/proc/iomem: fe4c0000-fe4dffff : 0000:01:00.0
/proc/iomem: fe4ff000-fe4fffff : 0000:01:00.0
/proc/iomem: fe700000-fe7fffff : 0000:00:04.0
/proc/iomem: fe700000-fe7fffff : e100
/proc/iomem: fe800000-fe8fffff : 0000:00:06.0
/proc/iomem: fe800000-fe8fffff : e100
/proc/iomem: fe9a0000-fe9bffff : 0000:00:05.0
/proc/iomem: fe9c0000-fe9dffff : 0000:00:05.1
/proc/iomem: fe9fb000-fe9fbfff : 0000:00:04.0
/proc/iomem: fe9fb000-fe9fbfff : e100
/proc/iomem: fe9fc000-fe9fcfff : 0000:00:05.0
/proc/iomem: fe9fc000-fe9fcfff : aic7xxx
/proc/iomem: fe9fd000-fe9fdfff : 0000:00:06.0
/proc/iomem: fe9fd000-fe9fdfff : e100
/proc/iomem: fe9fe000-fe9fefff : 0000:00:0f.2
/proc/iomem: fe9fe000-fe9fefff : ohci_hcd
/proc/iomem: fe9ff000-fe9fffff : 0000:00:05.1
/proc/iomem: fe9ff000-fe9fffff : aic7xxx
/proc/iomem: fec00000-fec01fff : reserved
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: fff80000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 346846 local-APIC-edge timer
/proc/interrupts: 1: 1253 IO-APIC-edge i8042
/proc/interrupts: 6: 10 IO-APIC-edge floppy
/proc/interrupts: 7: 0 IO-APIC-edge parport0
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 10: 0 IO-APIC-level ohci_hcd:usb1
/proc/interrupts: 15: 1714 IO-APIC-edge ide1
/proc/interrupts: 169: 25603 IO-APIC-level aic7xxx
/proc/interrupts: 177: 15 IO-APIC-level aic7xxx
/proc/interrupts: 193: 2325 IO-APIC-level eth1
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 346810
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 516980 kB
/proc/meminfo: MemFree: 132992 kB
/proc/meminfo: Buffers: 27304 kB
/proc/meminfo: Cached: 306956 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 216956 kB
/proc/meminfo: Inactive: 133400 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 516980 kB
/proc/meminfo: LowFree: 132992 kB
/proc/meminfo: SwapTotal: 1148636 kB
/proc/meminfo: SwapFree: 1148636 kB
/proc/meminfo: Dirty: 952 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 16132 kB
/proc/meminfo: Mapped: 1768 kB
/proc/meminfo: Slab: 26632 kB
/proc/meminfo: PageTables: 228 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 1407124 kB
/proc/meminfo: Committed_AS: 20040 kB
/proc/meminfo: VmallocTotal: 515792 kB
/proc/meminfo: VmallocUsed: 6176 kB
/proc/meminfo: VmallocChunk: 508664 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 50 structures occupying 1550 bytes.
dmidecode: Table at 0x000F0640.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: American Megatrends Inc.
dmidecode: Version: 0700xx
dmidecode: Release Date: 12/14/2000
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: ISA is supported
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: BIOS ROM is socketed
dmidecode: EDD is supported
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: LS-120 boot is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode: BIOS boot specification is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: Supermicro
dmidecode: Product Name: 370DER
dmidecode: Version: 1234567890
dmidecode: Serial Number: 1234567890
dmidecode: UUID: Not Present
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: Supermicro
dmidecode: Product Name: 370DER
dmidecode: Version: 1234567890
dmidecode: Serial Number: 1234567890
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Supermicro
dmidecode: Type: Desktop
dmidecode: Lock: Not Present
dmidecode: Version: 370DER
dmidecode: Serial Number: 1234567890
dmidecode: Asset Tag: 1234567890
dmidecode: Boot-up State: Unknown
dmidecode: Power Supply State: Unknown
dmidecode: Thermal State: Unknown
dmidecode: Security Status: Unknown
dmidecode: OEM Information: 0x00000000
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: FPGA
dmidecode: Type: Central Processor
dmidecode: Family: Pentium II
dmidecode: Manufacturer: Intel
dmidecode: ID: 86 06 00 00 FF FB 87 03
dmidecode: Signature: Type 0, Family 6, Model 8, Stepping 6
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: PSN (Processor serial number present and enabled)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: Version: PentiumIII(tm)
dmidecode: Voltage: 3.3 V 2.9 V
dmidecode: External Clock: 66 MHz
dmidecode: Max Speed: 500 MHz
dmidecode: Current Speed: 866 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Slot 2
dmidecode: L1 Cache Handle: 0x0006
dmidecode: L2 Cache Handle: 0x0007
dmidecode: L3 Cache Handle: Not Provided
dmidecode:
dmidecode: Handle 0x0005, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: FPGA
dmidecode: Type: Central Processor
dmidecode: Family: Pentium II
dmidecode: Manufacturer: Intel
dmidecode: ID: 86 06 00 00 FF FB 87 03
dmidecode: Signature: Type 0, Family 6, Model 8, Stepping 6
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: PSN (Processor serial number present and enabled)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: Version: PentiumIII(tm)
dmidecode: Voltage: 3.3 V 2.9 V
dmidecode: External Clock: 66 MHz
dmidecode: Max Speed: 500 MHz
dmidecode: Current Speed: 866 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Slot 2
dmidecode: L1 Cache Handle: 0x0006
dmidecode: L2 Cache Handle: 0x0007
dmidecode: L3 Cache Handle: Not Provided
dmidecode:
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1-Cache
dmidecode: Configuration: Enabled, Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 32 KB
dmidecode: Maximum Size: 32 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Pipeline Burst Synchronous
dmidecode: Speed: 40 ns
dmidecode: Error Correction Type: Parity
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0007, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2-cache
dmidecode: Configuration: Enabled, Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 256 KB
dmidecode: Maximum Size: 256 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Pipeline Burst Synchronous
dmidecode: Speed: 40 ns
dmidecode: Error Correction Type: Multi-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: Fully Associative
dmidecode:
dmidecode: Handle 0x0008, DMI type 5, 24 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: 64-bit ECC
dmidecode: Error Correcting Capabilities:
dmidecode: Single-bit Error Correcting
dmidecode: Supported Interleave: Four-way Interleave
dmidecode: Current Interleave: Four-way Interleave
dmidecode: Maximum Memory Module Size: 1024 MB
dmidecode: Maximum Total Memory Size: 4096 MB
dmidecode: Supported Speeds:
dmidecode: 70 ns
dmidecode: 60 ns
dmidecode: Supported Memory Types:
dmidecode: Other
dmidecode: Unknown
dmidecode: Standard
dmidecode: FPM
dmidecode: EDO
dmidecode: Parity
dmidecode: ECC
dmidecode: SIMM
dmidecode: DIMM
dmidecode: Burst EDO
dmidecode: SDRAM
dmidecode: Memory Module Voltage: 3.3 V
dmidecode: Associated Memory Slots: 4
dmidecode: 0x0009
dmidecode: 0x000A
dmidecode: 0x000B
dmidecode: 0x000C
dmidecode: Enabled Error Correcting Capabilities:
dmidecode: Single-bit Error Correcting
dmidecode:
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM1
dmidecode: Bank Connections: 0 0
dmidecode: Current Speed: 10 ns
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: 256 MB (Double-bank Connection)
dmidecode: Enabled Size: 256 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000A, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM2
dmidecode: Bank Connections: 0 0
dmidecode: Current Speed: 10 ns
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000B, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM3
dmidecode: Bank Connections: 0 0
dmidecode: Current Speed: 10 ns
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: 256 MB (Double-bank Connection)
dmidecode: Enabled Size: 256 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000C, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM4
dmidecode: Bank Connections: 0 0
dmidecode: Current Speed: 10 ns
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB
dmidecode: Internal Connector Type: Centronics
dmidecode: External Reference Designator: USB1
dmidecode: External Connector Type: Centronics
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB
dmidecode: Internal Connector Type: Centronics
dmidecode: External Reference Designator: USB2
dmidecode: External Connector Type: Centronics
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: COM1
dmidecode: Internal Connector Type: DB-9 female
dmidecode: External Reference Designator: COM1
dmidecode: External Connector Type: DB-9 female
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: COM2
dmidecode: Internal Connector Type: DB-9 female
dmidecode: External Reference Designator: COM2
dmidecode: External Connector Type: DB-9 female
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PRINTER
dmidecode: Internal Connector Type: DB-25 male
dmidecode: External Reference Designator: LPT1
dmidecode: External Connector Type: DB-25 male
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: U2
dmidecode: Internal Connector Type: PS/2
dmidecode: External Reference Designator: KEYBOARD
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: U3
dmidecode: Internal Connector Type: PS/2
dmidecode: External Reference Designator: MOUSE
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x0014, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 1
dmidecode: Characteristics: Unknown
dmidecode:
dmidecode: Handle 0x0015, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI2
dmidecode: Type: 64-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 2
dmidecode: Characteristics: Unknown
dmidecode:
dmidecode: Handle 0x0016, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI3
dmidecode: Type: 64-bit PCI
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: ID: 3
dmidecode: Characteristics: Unknown
dmidecode:
dmidecode: Handle 0x0017, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI4
dmidecode: Type: 64-bit PCI
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: ID: 4
dmidecode: Characteristics: Unknown
dmidecode:
dmidecode: Handle 0x0018, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI5
dmidecode: Type: 64-bit PCI
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: ID: 5
dmidecode: Characteristics: Unknown
dmidecode:
dmidecode: Handle 0x0019, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI6
dmidecode: Type: 64-bit PCI
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: ID: 6
dmidecode: Characteristics: Unknown
dmidecode:
dmidecode: Handle 0x001A, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI7
dmidecode: Type: 64-bit PCI
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: ID: 7
dmidecode: Characteristics: Unknown
dmidecode:
dmidecode: Handle 0x001B, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: ISA4
dmidecode: Type: 32-bit ISA
dmidecode: Current Usage: Unknown
dmidecode: Length: Long
dmidecode: Characteristics: Unknown
dmidecode:
dmidecode: Handle 0x001C, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Video
dmidecode: Status: Enabled
dmidecode: Description: To Be filled by O.E.M.
dmidecode:
dmidecode: Handle 0x001D, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: To Be Filled By O.E.M.
dmidecode: String 2: To Be Filled By O.E.M.
dmidecode: String 3: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x001E, DMI type 12, 5 bytes
dmidecode: System Configuration Options
dmidecode: Option 1: To Be Filled By O.E.M.
dmidecode: Option 2: To Be Filled By O.E.M.
dmidecode: Option 3: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x001F, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 4
dmidecode: English
dmidecode: Spanish
dmidecode: German
dmidecode: French
dmidecode: Currently Installed Language: English
dmidecode:
dmidecode: Handle 0x0020, DMI type 15, 33 bytes
dmidecode: System Event Log
dmidecode: Area Length: 1008 bytes
dmidecode: Header Start Offset: 0x1810
dmidecode: Header Length: 16 bytes
dmidecode: Data Start Offset: 0x1820
dmidecode: Access Method: General-purpose non-volatile data functions
dmidecode: Access Address: 0x0002
dmidecode: Status: Invalid, Not Full
dmidecode: Change Token: 0x00000000
dmidecode: Header Format: Type 1
dmidecode: Supported Log Type Descriptors: 5
dmidecode: Descriptor 1: POST error
dmidecode: Data Format 1: POST results bitmap
dmidecode: Descriptor 2: Parity memory error
dmidecode: Data Format 2: Multiple-event
dmidecode: Descriptor 3: I/O channel block
dmidecode: Data Format 3: Multiple-event
dmidecode: Descriptor 4: Single-bit ECC memory error
dmidecode: Data Format 4: Multiple-event
dmidecode: Descriptor 5: Multi-bit ECC memory error
dmidecode: Data Format 5: Multiple-event
dmidecode:
dmidecode: Handle 0x0021, DMI type 18, 23 bytes
dmidecode: 32-bit Memory Error Information
dmidecode: Type: Unknown
dmidecode: Granularity: Unknown
dmidecode: Operation: Unknown
dmidecode: Vendor Syndrome: Unknown
dmidecode: Memory Array Address: Unknown
dmidecode: Device Address: Unknown
dmidecode: Resolution: Unknown
dmidecode:
dmidecode: Handle 0x0022, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: Maximum Capacity: 16 GB
dmidecode: Error Information Handle: 0x0021
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x0023, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x3FFFFFFFFFF
dmidecode: Range Size: Invalid
dmidecode: Physical Array Handle: 0x0022
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x0024, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0022
dmidecode: Error Information Handle: 0x0021
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 72 bits
dmidecode: Size: 256 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM1
dmidecode: Bank Locator: BANK0
dmidecode: Type: SDRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x0025, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x0024
dmidecode: Memory Array Mapped Address Handle: 0x0023
dmidecode: Partition Row Position: 1
dmidecode: Interleave Position: 1
dmidecode: Interleaved Data Depth: 1
dmidecode:
dmidecode: Handle 0x0026, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0022
dmidecode: Error Information Handle: 0x0021
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 72 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM2
dmidecode: Bank Locator: BANK0
dmidecode: Type: SDRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x0027, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x0026
dmidecode: Memory Array Mapped Address Handle: 0x0023
dmidecode: Partition Row Position: 2
dmidecode: Interleave Position: 2
dmidecode: Interleaved Data Depth: 1
dmidecode:
dmidecode: Handle 0x0028, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0022
dmidecode: Error Information Handle: 0x0021
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 72 bits
dmidecode: Size: 256 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM3
dmidecode: Bank Locator: BANK0
dmidecode: Type: SDRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x0029, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x0028
dmidecode: Memory Array Mapped Address Handle: 0x0023
dmidecode: Partition Row Position: 3
dmidecode: Interleave Position: 3
dmidecode: Interleaved Data Depth: 1
dmidecode:
dmidecode: Handle 0x002A, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0022
dmidecode: Error Information Handle: 0x0021
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 72 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM4
dmidecode: Bank Locator: BANK0
dmidecode: Type: SDRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode:
dmidecode: Handle 0x002B, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x002A
dmidecode: Memory Array Mapped Address Handle: 0x0023
dmidecode: Partition Row Position: 4
dmidecode: Interleave Position: 4
dmidecode: Interleaved Data Depth: 1
dmidecode:
dmidecode: Handle 0x002C, DMI type 23, 13 bytes
dmidecode: System Reset
dmidecode: Status: Disabled
dmidecode: Watchdog Timer: Not Present
dmidecode:
dmidecode: Handle 0x002D, DMI type 25, 9 bytes
dmidecode: System Power Controls
dmidecode: Next Scheduled Power-on: *-* *:*:*
dmidecode:
dmidecode: Handle 0x002E, DMI type 32, 20 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x002F, DMI type 33, 31 bytes
dmidecode: 64-bit Memory Error Information
dmidecode: Type: Unknown
dmidecode: Granularity: Unknown
dmidecode: Operation: Unknown
dmidecode: Vendor Syndrome: Unknown
dmidecode: Memory Array Address: Unknown
dmidecode: Device Address: Unknown
dmidecode: Resolution: Unknown
dmidecode:
dmidecode: Handle 0x0030, DMI type 128, 12 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 80 0C 30 00 01 01 02 01 00 00 30 01
dmidecode: Strings:
dmidecode: Alert on LAN
dmidecode: SUPERMICRO 370DER
dmidecode:
dmidecode: Handle 0x0031, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: usb-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB storage support
Package: serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: serial-modules
Depends: kernel-image-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: Serial drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: cdrom-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, ide-modules-2.6.18-4-486-di
Description: CDROM support
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.11
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: fb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Frame buffer support
Package: scsi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, parport-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: SCSI drivers
Package: pcmcia-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: PCMCIA storage drivers
Package: kernel-image-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: usb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: USB support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: parport-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: parport-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Parallel port support
Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: ide-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: IDE support
Package: cdrom-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-modules
Depends: ide-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Esoteric CDROM drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.105-3
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: ide-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di
Description: IDE drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: pcmcia-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: Common PCMCIA drivers
Package: load-cdrom
Status: install ok installed
Version: 1.14
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: scsi-common-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di
Description: Very common SCSI drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: acpi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: acpi-modules
Depends: kernel-image-2.6.18-4-486-di
Description: ACPI support modules
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: floppy-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: floppy-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Floppy driver
Package: usb-serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB serial drivers
Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45
Description: Terminfo entries needed by newt/slang in debian installer
Package: fat-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fat-modules
Depends: kernel-image-2.6.18-4-486-di
Description: FAT filesystem support
Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: firewire-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Core FireWire drivers
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: firmware-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firmware-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Firmware request modules
Package: input-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: input-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: Input devices support
Package: scsi-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Core SCSI subsystem
Package: cdrom-detect
Status: install ok installed
Version: 1.20
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: sata-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: sata-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Description: SATA drivers
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20070308
Description: debian installation image
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.76
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.14
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 196
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.6-6)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-4
Depends: libc6 (>= 2.3.6-6)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: efi-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: efi-modules
Description: EFI modules
This package contains EFI modules.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
Installer-Menu-Item: 76
Package: ext3-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-19
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gpgv-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.6-1
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG's signature verification tool, gpgv, packaged in minimal
form for use in debian-installer.
Package: grub-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 376
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-4
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-9
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2992
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, crc-modules-2.6.18-4-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, firewire-core-modules-2.6.18-4-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 572
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, nic-extra-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 208
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6+b2
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 392
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 68
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 105
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 880
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base, efi-modules
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1388
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: scsi-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 552
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-686
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
--- End Message ---