Bug#509238: some more logs
Hi,
I have the same problem with my TC-261MXI (mini PC) and I managed to get
more logs which seem to be informative.
I also booted from USB. I used syslinux with kernel and initrd from
http://http.us.debian.org/debian/dists/lenny/main/installer-i386/current/images/netboot/debian-installer/i386/
But the workaround with vga=771 does not work for me (I got larger
display, but panic still occurs).
I tried to get some more info from syslogd:
I booted with the following kernel parameters (immitating expert mode)
priority=low vga=normal initrd=initrd.gz
Then I switched to VT2 and started debugging to the second partition on
USB disk:
tail -n+1 -f /var/log/syslog > /dev/sda2
I confirmed to configure network devices and to start PC card services.
I confirmed to use DHCP to autoconfigure the network and the progress
bar went slowly to 100%. At that point, kernel panic usually happens.
Alternatively, the dialog is shown, saying that autoconfiguring via DHCP
failed. If I confirm to continue, kernel panic occurs; alternatively,
kernel panic sometimes occurs in about 30 secs without me confirming to
countinue.
Unfortunately, I managed to capture syslogd messages only to the stage
before I confirmed to use DHCP (and after it completes network device
configuration). There were many lines of messages on VT4 just before the
panic, but unfortunately this version of tail is not able to log in
shorter intervals than 1 sec.
But the line saying "kernel BUG at include/linux/netdevice.h:431!" could
be informative, I think.
Attached is the output of "lspci -vvv" and the content
of /var/log/syslog 1 sec. before the panic.
Best regards,
Tomas "trosos" Tintera
Aug 25 20:27:38 syslogd started: BusyBox v1.10.2
Aug 25 20:27:38 kernel: klogd started: BusyBox v1.10.2 (Debian 1:1.10.2-2)
Aug 25 20:27:38 kernel: [ 0.000000] Initializing cgroup subsys cpu
Aug 25 20:27:38 kernel: [ 0.000000] Linux version 2.6.26-2-486 (Debian 2.6.26-23) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Sat Jun 12 02:15:32 UTC 2010
Aug 25 20:27:38 kernel: [ 0.000000] CPU: Vendor unknown, using generic init.
Aug 25 20:27:38 kernel: [ 0.000000] CPU: Your system may be unstable.
Aug 25 20:27:38 kernel: [ 0.000000] BIOS-provided physical RAM map:
Aug 25 20:27:38 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Aug 25 20:27:38 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Aug 25 20:27:38 kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Aug 25 20:27:38 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
Aug 25 20:27:38 kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Aug 25 20:27:38 kernel: [ 0.000000] 512MB LOWMEM available.
Aug 25 20:27:38 kernel: [ 0.000000] Entering add_active_range(0, 0, 131072) 0 entries of 256 used
Aug 25 20:27:38 kernel: [ 0.000000] Zone PFN ranges:
Aug 25 20:27:38 kernel: [ 0.000000] DMA 0 -> 4096
Aug 25 20:27:38 kernel: [ 0.000000] Normal 4096 -> 131072
Aug 25 20:27:38 kernel: [ 0.000000] Movable zone start PFN for each node
Aug 25 20:27:38 kernel: [ 0.000000] early_node_map[1] active PFN ranges
Aug 25 20:27:38 kernel: [ 0.000000] 0: 0 -> 131072
Aug 25 20:27:38 kernel: [ 0.000000] On node 0 totalpages: 131072
Aug 25 20:27:38 kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Aug 25 20:27:38 kernel: [ 0.000000] DMA zone: 0 pages reserved
Aug 25 20:27:38 kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Aug 25 20:27:38 kernel: [ 0.000000] Normal zone: 992 pages used for memmap
Aug 25 20:27:38 kernel: [ 0.000000] Normal zone: 125984 pages, LIFO batch:31
Aug 25 20:27:38 kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Aug 25 20:27:38 kernel: [ 0.000000] DMI not present or invalid.
Aug 25 20:27:38 kernel: [ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080321]
Aug 25 20:27:38 kernel: [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df000000)
Aug 25 20:27:38 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Aug 25 20:27:38 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
Aug 25 20:27:38 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Aug 25 20:27:38 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Aug 25 20:27:38 kernel: [ 0.000000] Kernel command line: priority=low vga=normal initrd=initrd.gz BOOT_IMAGE=linux
Aug 25 20:27:38 kernel: [ 0.000000] No local APIC present or hardware disabled
Aug 25 20:27:38 kernel: [ 0.000000] mapped APIC to ffffb000 (01403000)
Aug 25 20:27:38 kernel: [ 0.000000] Initializing CPU#0
Aug 25 20:27:38 kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
Aug 25 20:27:38 kernel: [ 0.000000] Detected 1000.063 MHz processor.
Aug 25 20:27:38 kernel: [ 0.004000] Console: colour VGA+ 80x25
Aug 25 20:27:38 kernel: [ 0.004000] console [tty0] enabled
Aug 25 20:27:38 kernel: [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug 25 20:27:38 kernel: [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug 25 20:27:38 kernel: [ 0.004000] Memory: 509724k/524288k available (1697k kernel code, 14060k reserved, 746k data, 320k init, 0k highmem)
Aug 25 20:27:38 kernel: [ 0.004000] virtual kernel memory layout:
Aug 25 20:27:38 kernel: [ 0.004000] fixmap : 0xfffb3000 - 0xfffff000 ( 304 kB)
Aug 25 20:27:38 kernel: [ 0.004000] vmalloc : 0xe0800000 - 0xfffb1000 ( 503 MB)
Aug 25 20:27:38 kernel: [ 0.004000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
Aug 25 20:27:38 kernel: [ 0.004000] .init : 0xc0366000 - 0xc03b6000 ( 320 kB)
Aug 25 20:27:38 kernel: [ 0.004000] .data : 0xc02a8475 - 0xc0363000 ( 746 kB)
Aug 25 20:27:38 kernel: [ 0.004000] .text : 0xc0100000 - 0xc02a8475 (1697 kB)
Aug 25 20:27:38 kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Aug 25 20:27:38 kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Aug 25 20:27:38 kernel: [ 0.084455] Calibrating delay using timer specific routine.. 2003.50 BogoMIPS (lpj=4007010)
Aug 25 20:27:38 kernel: [ 0.084770] Security Framework initialized
Aug 25 20:27:38 kernel: [ 0.084871] SELinux: Disabled at boot.
Aug 25 20:27:38 kernel: [ 0.084955] Capability LSM initialized
Aug 25 20:27:38 kernel: [ 0.085079] Mount-cache hash table entries: 512
Aug 25 20:27:38 kernel: [ 0.085742] Initializing cgroup subsys ns
Aug 25 20:27:38 kernel: [ 0.085832] Initializing cgroup subsys cpuacct
Aug 25 20:27:38 kernel: [ 0.085909] Initializing cgroup subsys devices
Aug 25 20:27:38 kernel: [ 0.086080] CPU: Vortex86 SoC 05/08 stepping 06
Aug 25 20:27:38 kernel: [ 0.086253] Checking 'hlt' instruction... OK.
Aug 25 20:27:38 kernel: [ 0.109117] Freeing SMP alternatives: 0k freed
Aug 25 20:27:38 kernel: [ 0.109200] ACPI: Core revision 20080321
Aug 25 20:27:38 kernel: [ 0.109415] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20080321]
Aug 25 20:27:38 kernel: [ 0.109602] ACPI: Unable to load the System Description Tables
Aug 25 20:27:38 kernel: [ 0.110823] net_namespace: 652 bytes
Aug 25 20:27:38 kernel: [ 0.110908] Booting paravirtualized kernel on bare hardware
Aug 25 20:27:38 kernel: [ 0.112007] NET: Registered protocol family 16
Aug 25 20:27:38 kernel: [ 0.113339] EISA bus registered
Aug 25 20:27:38 kernel: [ 0.114242] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=0
Aug 25 20:27:38 kernel: [ 0.114328] PCI: Using configuration type 1 for base access
Aug 25 20:27:38 kernel: [ 0.114412] Setting up standard PCI resources
Aug 25 20:27:38 kernel: [ 0.121555] ACPI: Interpreter disabled.
Aug 25 20:27:38 kernel: [ 0.121641] Linux Plug and Play Support v0.97 (c) Adam Belay
Aug 25 20:27:38 kernel: [ 0.121908] pnp: PnP ACPI: disabled
Aug 25 20:27:38 kernel: [ 0.121985] PnPBIOS: Scanning system for PnP BIOS support...
Aug 25 20:27:38 kernel: [ 0.122129] PnPBIOS: Found PnP BIOS installation structure at 0xc00f3bf0
Aug 25 20:27:38 kernel: [ 0.122220] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x45ba, dseg 0xf0000
Aug 25 20:27:38 kernel: [ 0.126843] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
Aug 25 20:27:38 kernel: [ 0.128835] PCI: Probing PCI hardware
Aug 25 20:27:38 kernel: [ 0.128916] PCI: Probing PCI hardware (bus 00)
Aug 25 20:27:38 kernel: [ 0.131960] PCI: Using IRQ router default [17f3/6036] at 0000:00:07.0
Aug 25 20:27:38 kernel: [ 0.132737] system 00:00: iomem range 0x0-0x9fbff could not be reserved
Aug 25 20:27:38 kernel: [ 0.132834] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
Aug 25 20:27:38 kernel: [ 0.132926] system 00:00: iomem range 0xe4000-0xfffff could not be reserved
Aug 25 20:27:38 kernel: [ 0.133018] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
Aug 25 20:27:38 kernel: [ 0.133137] system 00:00: iomem range 0xff000000-0xffffffff could not be reserved
Aug 25 20:27:38 kernel: [ 0.133289] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
Aug 25 20:27:38 kernel: [ 0.133379] system 00:08: ioport range 0xcf8-0xcff could not be reserved
Aug 25 20:27:38 kernel: [ 0.133470] system 00:08: ioport range 0xfc00-0xfc0f has been reserved
Aug 25 20:27:38 kernel: [ 0.133560] system 00:08: ioport range 0xa00-0xa0f has been reserved
Aug 25 20:27:38 kernel: [ 0.133649] system 00:08: ioport range 0xa20-0xa2f has been reserved
Aug 25 20:27:38 kernel: [ 0.133738] system 00:08: ioport range 0xa10-0xa1f has been reserved
Aug 25 20:27:38 kernel: [ 0.133827] system 00:08: ioport range 0xa30-0xa3f has been reserved
Aug 25 20:27:38 kernel: [ 0.133918] system 00:08: ioport range 0xa40-0xa4f has been reserved
Aug 25 20:27:38 kernel: [ 0.134007] system 00:08: ioport range 0xa50-0xa5f has been reserved
Aug 25 20:27:38 kernel: [ 0.134122] system 00:0c: ioport range 0xa60-0xa6f has been reserved
Aug 25 20:27:38 kernel: [ 0.134231] system 00:0d: ioport range 0x3f0-0x3f5 has been reserved
Aug 25 20:27:38 kernel: [ 0.136914] NET: Registered protocol family 2
Aug 25 20:27:38 kernel: [ 0.137377] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
Aug 25 20:27:38 kernel: [ 0.138517] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
Aug 25 20:27:38 kernel: [ 0.140332] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Aug 25 20:27:38 kernel: [ 0.141344] TCP: Hash tables configured (established 65536 bind 65536)
Aug 25 20:27:38 kernel: [ 0.141429] TCP reno registered
Aug 25 20:27:38 kernel: [ 0.141767] NET: Registered protocol family 1
Aug 25 20:27:38 kernel: [ 0.142371] checking if image is initramfs... it is
Aug 25 20:27:38 kernel: [ 2.554428] Freeing initrd memory: 5869k freed
Aug 25 20:27:38 kernel: [ 2.556881] audit: initializing netlink socket (disabled)
Aug 25 20:27:38 kernel: [ 2.557011] type=2000 audit(1282768053.555:1): initialized
Aug 25 20:27:38 kernel: [ 2.557481] Total HugeTLB memory allocated, 0
Aug 25 20:27:38 kernel: [ 2.557813] VFS: Disk quotas dquot_6.5.1
Aug 25 20:27:38 kernel: [ 2.558003] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug 25 20:27:38 kernel: [ 2.558233] msgmni has been set to 1007
Aug 25 20:27:38 kernel: [ 2.558770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Aug 25 20:27:38 kernel: [ 2.558893] io scheduler noop registered
Aug 25 20:27:38 kernel: [ 2.558967] io scheduler anticipatory registered
Aug 25 20:27:38 kernel: [ 2.559043] io scheduler deadline registered
Aug 25 20:27:38 kernel: [ 2.559154] io scheduler cfq registered (default)
Aug 25 20:27:38 kernel: [ 2.834256] pci 0000:00:0d.0: Boot video device
Aug 25 20:27:38 kernel: [ 2.835896] isapnp: Scanning for PnP cards...
Aug 25 20:27:38 kernel: [ 2.850206] Clocksource tsc unstable (delta = 235966864 ns)
Aug 25 20:27:38 kernel: [ 3.188020] isapnp: No Plug & Play device found
Aug 25 20:27:38 kernel: [ 3.203860] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Aug 25 20:27:38 kernel: [ 3.204667] serial8250: ttyS0 at I/O 0
Aug 25 20:27:38 kernel: x3f8 (irq = 4) is a 16550A
Aug 25 20:27:38 kernel: [ 3.205310] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
Aug 25 20:27:38 kernel: [ 3.205703] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
Aug 25 20:27:38 kernel: [ 3.206924] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 25 20:27:38 kernel: [ 3.207603] 00:0a: ttyS2 at I/O 0x3e8 (irq = 10) is a 16550A
Aug 25 20:27:38 kernel: [ 3.208313] 00:0b: ttyS3 at I/O 0x2e8 (irq = 11) is a 16550A
Aug 25 20:27:38 kernel: [ 3.217235] brd: module loaded
Aug 25 20:27:38 kernel: [ 3.217795] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
Aug 25 20:27:38 kernel: [ 3.217885] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Aug 25 20:27:38 kernel: [ 3.218781] serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 25 20:27:38 kernel: [ 3.219570] mice: PS/2 mouse device common for all mice
Aug 25 20:27:38 kernel: [ 3.220281] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Aug 25 20:27:38 kernel: [ 3.220403] rtc0: alarms up to one day
Aug 25 20:27:38 kernel: [ 3.221102] EISA: Probing bus 0 at eisa.0
Aug 25 20:27:38 kernel: [ 3.221265] EISA: Detected 0 cards.
Aug 25 20:27:38 kernel: [ 3.221340] cpuidle: using governor ladder
Aug 25 20:27:38 kernel: [ 3.221415] cpuidle: using governor menu
Aug 25 20:27:38 kernel: [ 3.221501] No iBFT detected.
Aug 25 20:27:38 kernel: [ 3.223511] TCP cubic registered
Aug 25 20:27:38 kernel: [ 3.223589] NET: Registered protocol family 17
Aug 25 20:27:38 kernel: [ 3.223698] Using IPI Shortcut mode
Aug 25 20:27:38 kernel: [ 3.224748] registered taskstats version 1
Aug 25 20:27:38 kernel: [ 3.225242] rtc_cmos 00:04: setting system clock to 2010-08-25 20:27:34 UTC (1282768054)
Aug 25 20:27:38 kernel: [ 3.226573] Freeing unused kernel memory: 320k freed
Aug 25 20:27:38 kernel: [ 3.252247] input: AT Translated Set 2 keyboard as /class/input/input0
Aug 25 20:27:38 kernel: [ 4.876668] <6>r6040: RDC R6040 NAPI net driver,version 0.16 (10Nov2007)
Aug 25 20:27:38 kernel: [ 4.876685]
Aug 25 20:27:38 kernel: [ 5.472975] usbcore: registered new interface driver usbfs
Aug 25 20:27:38 kernel: [ 5.473205] usbcore: registered new interface driver hub
Aug 25 20:27:38 kernel: [ 5.473499] usbcore: registered new device driver usb
Aug 25 20:27:38 kernel: [ 5.485439] ehci_hcd 0000:00:0a.1: EHCI Host Controller
Aug 25 20:27:38 kernel: [ 5.485875] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
Aug 25 20:27:38 kernel: [ 5.494757] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Aug 25 20:27:38 kernel: [ 5.508251] ehci_hcd 0000:00:0a.1: irq 3, io mem 0xfebdf800
Aug 25 20:27:38 kernel: [ 5.520211] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 25 20:27:38 kernel: [ 5.520740] usb usb1: configuration #1 chosen from 1 choice
Aug 25 20:27:38 kernel: [ 5.520993] hub 1-0:1.0: USB hub found
Aug 25 20:27:38 kernel: [ 5.521110] hub 1-0:1.0: 2 ports detected
Aug 25 20:27:38 kernel: [ 5.624747] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Aug 25 20:27:38 kernel: [ 5.624854] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 25 20:27:38 kernel: [ 5.624969] usb usb1: Product: EHCI Host Controller
Aug 25 20:27:38 kernel: [ 5.625047] usb usb1: Manufacturer: Linux 2.6.26-2-486 ehci_hcd
Aug 25 20:27:38 kernel: [ 5.625129] usb usb1: SerialNumber: 0000:00:0a.1
Aug 25 20:27:38 kernel: [ 5.625324] ehci_hcd 0000:00:0b.1: EHCI Host Controller
Aug 25 20:27:38 kernel: [ 5.625535] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
Aug 25 20:27:38 kernel: [ 5.648230] ehci_hcd 0000:00:0b.1: irq 9, io mem 0xfebdfc00
Aug 25 20:27:38 kernel: [ 5.660196] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 25 20:27:38 kernel: [ 5.660647] usb usb2: configuration #1 chosen from 1 choice
Aug 25 20:27:38 kernel: [ 5.660907] hub 2-0:1.0: USB hub found
Aug 25 20:27:38 kernel: [ 5.661022] hub 2-0:1.0: 2 ports detected
Aug 25 20:27:38 kernel: [ 5.764634] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Aug 25 20:27:38 kernel: [ 5.764732] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 25 20:27:38 kernel: [ 5.764848] usb usb2: Product: EHCI Host Controller
Aug 25 20:27:38 kernel: [ 5.764925] usb usb2: Manufacturer: Linux 2.6.26-2-486 ehci_hcd
Aug 25 20:27:38 kernel: [ 5.765007] usb usb2: SerialNumber: 0000:00:0b.1
Aug 25 20:27:38 kernel: [ 5.765199] ohci_hcd 0000:00:0a.0: OHCI Host Controller
Aug 25 20:27:38 kernel: [ 5.765406] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 3
Aug 25 20:27:38 kernel: [ 5.765573] ohci_hcd 0000:00:0a.0: irq 7, io mem 0xfebdd000
Aug 25 20:27:38 kernel: [ 5.850365] usb usb3: configuration #1 chosen from 1 choice
Aug 25 20:27:38 kernel: [ 5.850610] hub 3-0:1.0: USB hub found
Aug 25 20:27:38 kernel: [ 5.851535] hub 3-0:1.0: 2 ports detected
Aug 25 20:27:38 kernel: [ 5.952646] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Aug 25 20:27:38 kernel: [ 5.952746] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 25 20:27:38 kernel: [ 5.952861] usb usb3: Product: OHCI Host Controller
Aug 25 20:27:38 kernel: [ 5.952939] usb usb3: Manufacturer: Linux 2.6.26-2-486 ohci_hcd
Aug 25 20:27:38 kernel: [ 5.953021] usb usb3: SerialNumber: 0000:00:0a.0
Aug 25 20:27:38 kernel: [ 5.954424] ohci_hcd 0000:00:0b.0: OHCI Host Controller
Aug 25 20:27:38 kernel: [ 5.954650] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 4
Aug 25 20:27:38 kernel: [ 5.954810] ohci_hcd 0000:00:0b.0: irq 5, io mem 0xfebde000
Aug 25 20:27:38 kernel: [ 6.038446] usb usb4: configuration #1 chosen from 1 choice
Aug 25 20:27:38 kernel: [ 6.038721] hub 4-0:1.0: USB hub found
Aug 25 20:27:38 kernel: [ 6.038837] hub 4-0:1.0: 2 ports detected
Aug 25 20:27:38 kernel: [ 6.140741] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Aug 25 20:27:38 kernel: [ 6.140847] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 25 20:27:38 kernel: [ 6.140964] usb usb4: Product: OHCI Host Controller
Aug 25 20:27:38 kernel: [ 6.141041] usb usb4: Manufacturer: Linux 2.6.26-2-486 ohci_hcd
Aug 25 20:27:38 kernel: [ 6.141123] usb usb4: SerialNumber: 0000:00:0b.0
Aug 25 20:27:38 kernel: [ 6.276294] usb 3-2: new full speed USB device using ohci_hcd and address 2
Aug 25 20:27:38 kernel: [ 6.483524] usb 3-2: configuration #1 chosen from 1 choice
Aug 25 20:27:38 kernel: [ 6.485990] usb 3-2: New USB device found, idVendor=10d6, idProduct=1100
Aug 25 20:27:38 kernel: [ 6.486090] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
Aug 25 20:27:38 kernel: [ 6.486178] usb 3-2: Product: USB MASS STORAGE CLASS
Aug 25 20:27:38 kernel: [ 6.486270] usb 3-2: SerialNumber: USB MASS STORAGE CLASS
Aug 25 20:27:38 kernel: [ 6.655468] SCSI subsystem initialized
Aug 25 20:27:38 kernel: [ 6.677341] Initializing USB Mass Storage driver...
Aug 25 20:27:38 kernel: [ 6.680301] scsi0 : SCSI emulation for USB Mass Storage devices
Aug 25 20:27:38 kernel: [ 6.680844] usbcore: registered new interface driver usb-storage
Aug 25 20:27:38 kernel: [ 6.680951] USB Mass Storage support registered.
Aug 25 20:27:38 kernel: [ 6.684908] usb-storage: device found at 2
Aug 25 20:27:38 kernel: [ 6.684929] usb-storage: waiting for device to settle before scanning
Aug 25 20:27:38 kernel: [ 6.956916] thermal: Unknown symbol acpi_processor_set_thermal_limit
Aug 25 20:27:40 frontend: Setting debconf/priority to low
Aug 25 20:27:41 kernel: [ 10.580990] vga16fb: initializing
Aug 25 20:27:41 kernel: [ 10.581014] vga16fb: mapped to 0xc00a0000
Aug 25 20:27:41 kernel: [ 10.676995] Console: switching to colour frame buffer device 80x30
Aug 25 20:27:41 kernel: [ 10.689029] fb0: VGA16 VGA frame buffer device
Aug 25 20:27:42 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
Aug 25 20:27:42 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Aug 25 20:27:42 kernel: [ 11.685370] usb-storage: device scan complete
Aug 25 20:27:42 kernel: [ 11.690346] scsi scan: INQUIRY result too short (5), using 36
Aug 25 20:27:42 kernel: [ 11.690378] scsi 0:0:0:0: Direct-Access Acer MP120 FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS
Aug 25 20:27:44 kernel: [ 12.756836] Driver 'sd' needs updating - please use bus_type methods
Aug 25 20:27:44 kernel: [ 12.765292] sd 0:0:0:0: [sda] 968097 512-byte hardware sectors (496 MB)
Aug 25 20:27:44 kernel: [ 12.770275] sd 0:0:0:0: [sda] Write Protect is off
Aug 25 20:27:44 kernel: [ 12.770296] sd 0:0:0:0: [sda] Mode Sense: 00 c0 00 00
Aug 25 20:27:44 kernel: [ 12.770311] sd 0:0:0:0: [sda] Assuming drive cache: write through
Aug 25 20:27:44 kernel: [ 12.784267] sd 0:0:0:0: [sda] 968097 512-byte hardware sectors (496 MB)
Aug 25 20:27:44 kernel: [ 12.789270] sd 0:0:0:0: [sda] Write Protect is off
Aug 25 20:27:44 kernel: [ 12.789292] sd 0:0:0:0: [sda] Mode Sense: 00 c0 00 00
Aug 25 20:27:44 kernel: [ 12.789306] sd 0:0:0:0: [sda] Assuming drive cache: write through
Aug 25 20:27:44 kernel: [ 12.789331] sda:
Aug 25 20:27:44 kernel: sda1 sda2
Aug 25 20:27:44 kernel: [ 12.800642] sd 0:0:0:0: [sda] Attached SCSI removable disk
Aug 25 20:27:45 init: init: starting pid 992, tty '': '/sbin/reopen-console /sbin/debian-installer'
Aug 25 20:27:45 init: init: starting pid 1004, tty '/dev/tty4': '/usr/bin/tail -f /var/log/syslog'
Aug 25 20:27:47 debconf: Setting debconf/language to en
Aug 25 20:27:47 main-menu[1015]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Aug 25 20:27:47 main-menu[1015]: DEBUG: resolver (libc6): package doesn't exist (ignored)
Aug 25 20:27:54 init: init: starting pid 995, tty '/dev/tty2': '-/bin/sh'
Aug 25 20:28:57 main-menu[1015]: INFO: Menu item 'localechooser' selected
Aug 25 20:28:58 debconf: Setting debconf/language to en
Aug 25 20:28:59 localechooser: info: Language = 'en'
Aug 25 20:28:59 localechooser: info: line=en;0;US;en_US.UTF-8;;kbd=lat0-sun16(utf8)
Aug 25 20:28:59 localechooser: info: Set debian-installer/language = 'en'
Aug 25 20:28:59 localechooser: info: Set debian-installer/locale = 'en_US.UTF-8'
Aug 25 20:28:59 localechooser: info: Set debian-installer/fallbacklocale = 'en_US.UTF-8'
Aug 25 20:28:59 localechooser: info: Default country = 'US'
Aug 25 20:28:59 localechooser: info: Set debian-installer/consoledisplay = 'kbd=lat0-sun16(utf8)'
Aug 25 20:28:59 debconf: Setting debconf/language to en
Aug 25 20:29:00 localechooser: info: Set debian-installer/country = 'US'
Aug 25 20:29:00 localechooser: info: Set debian-installer/locale = 'en_US.UTF-8'
Aug 25 20:29:04 localechooser: info: Selected locale (debian-installer/locale) = 'en_US.UTF-8'
Aug 25 20:29:14 main-menu[1015]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Aug 25 20:29:14 main-menu[1015]: DEBUG: resolver (libc6): package doesn't exist (ignored)
Aug 25 20:29:15 main-menu[1015]: INFO: Menu item 'kbd-chooser' selected
Aug 25 20:29:15 main-menu[1015]: INFO: Falling back to the package description for console-keymaps-at
Aug 25 20:29:15 main-menu[1015]: INFO: Falling back to the package description for console-keymaps-at
Aug 25 20:29:15 kbd-chooser[1764]: DEBUG: Mounting usbdevfs to look for kbd
Aug 25 20:29:15 kbd-chooser[1764]: DEBUG: Parsing /proc/bus/usb/devices
Aug 25 20:29:15 kbd-chooser[1764]: DEBUG: Adding generic entry for AT keymaps
Aug 25 20:29:15 kbd-chooser[1764]: INFO: keyboard type at: present: true:
Aug 25 20:29:15 kbd-chooser[1764]: INFO: keyboard type at: present: unknown
Aug 25 20:29:15 kbd-chooser[1764]: INFO: Setting debian-installer/serial-console to false
Aug 25 20:29:15 kbd-chooser[1764]: INFO: Setting debian-installer/uml-console to false
Aug 25 20:29:16 kbd-chooser[1764]: INFO: kbd-chooser: arch at selected
Aug 25 20:29:19 kbd-chooser[1764]: INFO: choose_keymap: keymap = cz-lat2
Aug 25 20:29:19 kbd-chooser[1764]: INFO: kbd_chooser: setting keymap cz-lat2
Aug 25 20:29:19 main-menu[1015]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Aug 25 20:29:19 main-menu[1015]: DEBUG: resolver (libc6): package doesn't exist (ignored)
Aug 25 20:29:20 main-menu[1015]: INFO: Menu item 'ethdetect' selected
Aug 25 20:29:21 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
Aug 25 20:29:21 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Aug 25 20:29:26 hw-detect: Loading PCMCIA bridge driver module: i82365
Aug 25 20:29:26 kernel: [ 114.863720] Intel ISA PCIC probe: not found.
Aug 25 20:29:26 hw-detect: FATAL: Error inserting i82365 (/lib/modules/2.6.26-2-486/kernel/drivers/pcmcia/i82365.ko): No such device
Aug 25 20:29:26 apt-install: Queueing package udev for later installation
Aug 25 20:29:26 apt-install: Queueing package usbutils for later installation
Aug 25 20:29:26 apt-install: Queueing package eject for later installation
Aug 25 20:29:28 check-missing-firmware: no missing firmware in /tmp/missing-firmware
Aug 25 20:29:29 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
Aug 25 20:29:29 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Aug 25 20:29:31 kernel: [ 119.760970] ------------[ cut here ]------------
Aug 25 20:29:31 kernel: [ 119.760994] WARNING: at arch/x86/kernel/pci-dma.c:488 dma_free_coherent+0x42/0xa4()
Aug 25 20:29:31 kernel: [ 119.761010] Modules linked in: rsrc_nonstatic pcmcia_core sd_mod vga16fb vgastate thermal_sys usb_storage scsi_mod ohci_hcd ehci_hcd usbcore r6040 mii
Aug 25 20:29:31 kernel: [ 119.761072] Pid: 2796, comm: ip Not tainted 2.6.26-2-486 #1
Aug 25 20:29:31 kernel: [ 119.761091] [<c011bb38>] warn_on_slowpath+0x40/0x65
Aug 25 20:29:31 kernel: [ 119.761124] [<c0116dd5>] dequeue_entity+0x13/0x9b
Aug 25 20:29:31 kernel: [ 119.761152] [<c0116cc6>] __dequeue_entity+0x1f/0x71
Aug 25 20:29:31 kernel: [ 119.761176] [<c0102932>] __switch_to+0xc2/0xf7
Aug 25 20:29:31 kernel: [ 119.761207] [<c01630cd>] free_block+0xb8/0xf4
Aug 25 20:29:31 kernel: [ 119.761245] [<c01ce436>] memmove+0xe/0x22
Aug 25 20:29:31 kernel: [ 119.761278] [<c0106e66>] dma_free_coherent+0x42/0xa4
Aug 25 20:29:31 kernel: [ 119.761306] [<e080cba9>] r6040_close+0xce/0x10e [r6040]
Aug 25 20:29:31 kernel: [ 119.761351] [<c0250cf2>] dev_close+0x57/0x6e
Aug 25 20:29:31 kernel: [ 119.761380] [<c0250b9e>] dev_change_flags+0x91/0x13a
Aug 25 20:29:31 kernel: [ 119.761404] [<c02888a9>] devinet_ioctl+0x232/0x52d
Aug 25 20:29:31 kernel: [ 119.761439] [<c0246d99>] sock_ioctl+0x19f/0x1c1
Aug 25 20:29:31 kernel: [ 119.761465] [<c0246bfa>] sock_ioctl+0x0/0x1c1
Aug 25 20:29:31 kernel: [ 119.761486] [<c016f386>] vfs_ioctl+0x16/0x49
Aug 25 20:29:31 kernel: [ 119.761510] [<c016f59c>] do_vfs_ioctl+0x1e3/0x1f6
Aug 25 20:29:31 kernel: [ 119.761533] [<c016f5f0>] sys_ioctl+0x41/0x59
Aug 25 20:29:31 kernel: [ 119.761555] [<c01037c2>] syscall_call+0x7/0xb
Aug 25 20:29:31 kernel: [ 119.761586] =======================
Aug 25 20:29:31 kernel: [ 119.761599] ---[ end trace 42522550034076bd ]---
Aug 25 20:29:31 kernel: [ 119.761621] ------------[ cut here ]------------
Aug 25 20:29:31 kernel: [ 119.761635] WARNING: at arch/x86/kernel/pci-dma.c:488 dma_free_coherent+0x42/0xa4()
Aug 25 20:29:31 kernel: [ 119.761650] Modules linked in: rsrc_nonstatic pcmcia_core sd_mod vga16fb vgastate thermal_sys usb_storage scsi_mod ohci_hcd ehci_hcd usbcore r6040 mii
Aug 25 20:29:31 kernel: [ 119.761707] Pid: 2796, comm: ip Tainted: G W 2.6.26-2-486 #1
Aug 25 20:29:31 kernel: [ 119.761723] [<c011bb38>] warn_on_slowpath+0x40/0x65
Aug 25 20:29:31 kernel: [ 119.761752] [<c0116dd5>] dequeue_entity+0x13/0x9b
Aug 25 20:29:31 kernel: [ 119.761775] [<c0116cc6>] __dequeue_entity+0x1f/0x71
Aug 25 20:29:31 kernel: [ 119.761799] [<c0102932>] __switch_to+0xc2/0xf7
Aug 25 20:29:31 kernel: [ 119.761830] [<c01630cd>] free_block+0xb8/0xf4
Aug 25 20:29:31 kernel: [ 119.761860] [<c01ce436>] memmove+0xe/0x22
Aug 25 20:29:31 kernel: [ 119.761886] [<c0106e66>] dma_free_coherent+0x42/0xa4
Aug 25 20:29:31 kernel: [ 119.761913] [<e080cbd5>] r6040_close+0xfa/0x10e [r6040]
Aug 25 20:29:31 kernel: [ 119.761946] [<c0250cf2>] dev_close+0x57/0x6e
Aug 25 20:29:31 kernel: [ 119.761968] [<c0250b9e>] dev_change_flags+0x91/0x13a
Aug 25 20:29:31 kernel: [ 119.761992] [<c02888a9>] devinet_ioctl+0x232/0x52d
Aug 25 20:29:31 kernel: [ 119.762024] [<c0246d99>] sock_ioctl+0x19f/0x1c1
Aug 25 20:29:31 kernel: [ 119.762046] [<c0246bfa>] sock_ioctl+0x0/0x1c1
Aug 25 20:29:31 kernel: [ 119.762067] [<c016f386>] vfs_ioctl+0x16/0x49
Aug 25 20:29:31 kernel: [ 119.762087] [<c016f59c>] do_vfs_ioctl+0x1e3/0x1f6
Aug 25 20:29:31 kernel: [ 119.762110] [<c016f5f0>] sys_ioctl+0x41/0x59
Aug 25 20:29:31 kernel: [ 119.762131] [<c01037c2>] syscall_call+0x7/0xb
Aug 25 20:29:31 kernel: [ 119.762160] =======================
Aug 25 20:29:31 kernel: [ 119.762172] ---[ end trace 42522550034076bd ]---
Aug 25 20:29:32 check-missing-firmware: no missing firmware in /tmp/missing-firmware
Aug 25 20:29:32 main-menu[1015]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Aug 25 20:29:32 main-menu[1015]: DEBUG: resolver (libc6): package doesn't exist (ignored)
Aug 25 20:29:37 main-menu[1015]: INFO: Menu item 'netcfg' selected
Aug 25 20:29:46 dhclient: Internet Systems Consortium DHCP Client V3.1.1
Aug 25 20:29:46 dhclient: Copyright 2004-2008 Internet Systems Consortium.
Aug 25 20:29:46 dhclient: All rights reserved.
Aug 25 20:29:46 dhclient: For info, please visit http://www.isc.org/sw/dhcp/
Aug 25 20:29:46 dhclient:
Aug 25 20:29:46 kernel: [ 135.196236] ------------[ cut here ]------------
Aug 25 20:29:46 kernel: [ 135.196265] kernel BUG at include/linux/netdevice.h:431!
Aug 25 20:29:46 kernel: [ 135.196280] invalid opcode: 0000 [#1]
Aug 25 20:29:46 kernel: [ 135.196292] Modules linked in: rsrc_nonstatic pcmcia_core sd_mod vga16fb vgastate thermal_sys usb_storage scsi_mod ohci_hcd ehci_hcd usbcore r6040 mii
Aug 25 20:29:46 kernel: [ 135.196345]
Aug 25 20:29:46 kernel: [ 135.196362] Pid: 2839, comm: ip Tainted: G W (2.6.26-2-486 #1)
Aug 25 20:29:46 kernel: [ 135.196379] EIP: 0060:[<e080cf76>] EFLAGS: 00000246 CPU: 0
Aug 25 20:29:46 kernel: [ 135.196420] EIP is at r6040_open+0x282/0x2c8 [r6040]
Aug 25 20:29:46 kernel: [ 135.196436] EAX: df4c6c28 EBX: 0001de00 ECX: 0001de40 EDX: 0000de40
Aug 25 20:29:46 kernel: [ 135.196454] ESI: df4c6ba0 EDI: df4c6800 EBP: df4c6ba0 ESP: de745ecc
Aug 25 20:29:46 kernel: [ 135.196472] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Aug 25 20:29:46 kernel: [ 135.196490] Process ip (pid: 2839, ti=de744000 task=df4e2550 task.ti=de744000)
Aug 25 20:29:46 kernel: [ 135.196504] Stack: 00000000 df4c6800 00001003 00001002 00000000 c0251c64 df4c6800 c0250b9e
Aug 25 20:29:46 kernel: [ 135.196538] 00000000 de27dc01 de27dce0 df4c6800 c02888a9 de745f2c bfffd9e8 00008914
Aug 25 20:29:46 kernel: [ 135.196571] c040d080 de27dcec 00000000 00000000 30687465 00000000 00000000 00000000
Aug 25 20:29:46 kernel: [ 135.196603] Call Trace:
Aug 25 20:29:46 kernel: [ 135.196617] [<c0251c64>] dev_open+0x63/0x93
Aug 25 20:29:46 kernel: [ 135.196651] [<c0250b9e>] dev_change_flags+0x91/0x13a
Aug 25 20:29:46 kernel: [ 135.196676] [<c02888a9>] devinet_ioctl+0x232/0x52d
Aug 25 20:29:46 kernel: [ 135.196710] [<c0246d99>] sock_ioctl+0x19f/0x1c1
Aug 25 20:29:46 kernel: [ 135.196737] [<c0246bfa>] sock_ioctl+0x0/0x1c1
Aug 25 20:29:46 kernel: [ 135.196758] [<c016f386>] vfs_ioctl+0x16/0x49
Aug 25 20:29:46 kernel: [ 135.196782] [<c016f59c>] do_vfs_ioctl+0x1e3/0x1f6
Aug 25 20:29:46 kernel: [ 135.196806] [<c016f5f0>] sys_ioctl+0x41/0x59
Aug 25 20:29:46 kernel: [ 135.196827] [<c01037c2>] syscall_call+0x7/0xb
Aug 25 20:29:46 kernel: [ 135.196862] =======================
Aug 25 20:29:46 kernel: [ 135.196872] Code: 89 d8 68 f0 01 00 00 e8 12 f1 ff ff b8 11 00 00 00 8d 53 40 e8 1c 3e 9c df 8d 85 88 00 00 00 83 c4 10 f6 85 90 00 00 00 01 75 04 <0f> 0b eb fe 0f ba 70 08 00 0f ba 77 2c 00 c7 45 0c cc c7 80 e0
Aug 25 20:29:46 kernel: [ 135.197016] EIP: [<e080cf76>] r6040_open+0x282/0x2c8 [r6040] SS:ESP 0068:de745ecc
Aug 25 20:29:46 kernel: [ 135.197054] ---[ end trace 42522550034076bd ]---
00:00.0 Host bridge: RDC Semiconductor, Inc. Device 6021 (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
00:07.0 ISA bridge: RDC Semiconductor, Inc. Device 6036
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=?? >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:08.0 Ethernet controller: RDC Semiconductor, Inc. R6040 MAC Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (750ns min, 2000ns max)
Interrupt: pin A routed to IRQ 6
Region 0: I/O ports at de00 [size=256]
Region 1: Memory at febdf400 (32-bit, non-prefetchable) [size=256]
Expansion ROM at febc0000 [disabled] [size=64K]
Kernel driver in use: r6040
Kernel modules: r6040
00:0a.0 USB Controller: RDC Semiconductor, Inc. R6060 USB 1.1 Controller (rev 12) (prog-if 10)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 7
Region 0: Memory at febdd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0a.1 USB Controller: RDC Semiconductor, Inc. R6061 USB 2.0 Controller (rev 03) (prog-if 20)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 3
Region 0: Memory at febdf800 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:0b.0 USB Controller: RDC Semiconductor, Inc. R6060 USB 1.1 Controller (rev 12) (prog-if 10)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at febde000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0b.1 USB Controller: RDC Semiconductor, Inc. R6061 USB 2.0 Controller (rev 03) (prog-if 20)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 9
Region 0: Memory at febdfc00 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:0c.0 IDE interface: RDC Semiconductor, Inc. Device 1011 (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: RDC Semiconductor, Inc. Device 1011
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 14
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ef00 [size=16]
00:0d.0 VGA compatible controller: RDC Semiconductor, Inc. Device 2010
Subsystem: RDC Semiconductor, Inc. Device 2010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 0
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Region 1: Memory at febe0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at df80 [size=128]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Reply to: