Bug#592939: Installation Report with squeeze installer on K7 architecture
Package: installation-reports
Boot method: CD
Image version: Self-made boot CD with actual squeeze installer
Date: 2010-08-14
Machine: Self-made Desktop PC
Processor: AMD Duron 800MHz
Memory: 256MB
Partitions: <df -Tl will do; the raw partition table is preferred>
> Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf
> /dev/sda1 ext4 1921156 565776 1257788 32% /
> tmpfs tmpfs 127676 0 127676 0% /lib/init/rw
> udev tmpfs 123340 128 123212 1% /dev
> tmpfs tmpfs 127676 0 127676 0% /dev/shm
> /dev/sda5 xfs 77443576 40973076 36470500 53% /storage1
> /dev/sdb5 xfs 244076732 178833244 65243488 74% /storage2
Output of lspci -knn (or lspci -nn):
> 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 735 Host
> [1039:0735] (rev 01)
> Kernel driver in use: agpgart-sis
> 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] Virtual
> PCI-to-PCI bridge (AGP) [1039:0001]
> 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS]
> SiS85C503/5513 (LPC Bridge) [1039:0018]
> 00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus
> Controller [1039:0016]
> 00:02.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB
> 1.1 Controller [1039:7001] (rev 07)
> Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001]
> Kernel driver in use: ohci_hcd
> 00:02.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB
> 1.1 Controller [1039:7001] (rev 07)
> Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001]
> Kernel driver in use: ohci_hcd
> 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513
> [IDE] [1039:5513] (rev d0)
> Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller
> (A,B step) [1039:5513]
> Kernel driver in use: pata_sis
> 00:11.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
> Subsystem: Compex FN22-3(A) LinxPRO Ethernet Adapter [11f6:8139]
> Kernel driver in use: 8139too
> 00:13.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
> USB 1.1 Controller [1106:3038] (rev 50)
> Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
> Kernel driver in use: uhci_hcd
> 00:13.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
> USB 1.1 Controller [1106:3038] (rev 50)
> Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
> Kernel driver in use: uhci_hcd
> 00:13.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0
> [1106:3104] (rev 51)
> Subsystem: First International Computer, Inc. Device [0925:1234]
> Kernel driver in use: ehci_hcd
> 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage
> 128 RF/SG AGP [1002:5246]
> Subsystem: ATI Technologies Inc Magnum/Xpert 128/Xpert 99 [1002:0004]
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [E]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
The used architecture is a K7 architecture (AMD Duron 800MHz).
the used kernel-image has to be the -686 image.
But there is the -486 image installed.
Here, the output of /proc/cpuinfo:
> bernhard@CR-Server:~$ more /proc/cpuinfo
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 6
> model : 3
> model name : AMD Duron(tm) Processor
> stepping : 1
> cpu MHz : 796.606
> cache size : 64 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat
> pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
> bogomips : 1593.21
> clflush size : 32
> cache_alignment : 32
> address sizes : 36 bits physical, 32 bits virtual
> power management:
Regards
Bernhard
Reply to: