[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#579948: marked as done (SunBlade 1000 installation report - fails to mount root partition on /target)

Your message dated Tue, 03 Aug 2010 15:42:54 +0000
with message-id <E1OgJdm-0004xM-Dw@franck.debian.org>
and subject line Bug#579948: fixed in partman-base 143
has caused the Debian Bug report #579948,
regarding SunBlade 1000 installation report - fails to mount root partition on /target
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org

579948: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579948
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports

Boot method: May 2nd netinst daily image for sparc
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/sparc/iso-cd/debian-testing-sparc-netinst.iso
Date: Sun May  2 14:38:09 IST 2010

Machine: SunBlade 1000
Processor: Ultrasparc III x 2
Memory: 2GB
Partitions: did not get that far

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [E]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [ ]


A couple of issues:

The display of partition sizes appears to be all screwed up (see the 
first attached screenshot).

Attempt to mount /dev/sdb2 as / on /target fails with "invalid 
argument" (see second attached screenshot). My guess is that it 
happens because mount gets an argument -t ext3, while the partition is 
ext4, and mounts fine from the shell if I do not specify a type 
argument. Perhaps, mke2fs default has changed without installer being 
aware of it?

Best regards,
Jurij Smakov                                           jurij@wooyd.org
Key: http://www.wooyd.org/pgpkey/                      KeyID: C99E03CC
  ┌────────────────────────┤ [!!] Partition disks ├─────────────────────────┐
  │                                                                         │
  │ This is an overview of your currently configured partitions and mount   │
  │ points. Select a partition to modify its settings (file system, mount   │
  │ point, etc.), a free space to create partitions, or a device to         │
  │ initialize its partition table.                                         │
  │                                                                         │
  │        SCSI5 (0,0,0) (sdb) - 72.9 GB HITACHI DKR1C-J072FC               │
  │        >     #1     99.6 MB  B  f  ext2          /boot         ▒        │
  │        >            16.7 GB        FREE SPACE                  ▒        │
  │        >     #2      1.0 MB     f  ext3          /                      │
  │        >            16.8 GB        FREE SPACE                  ▒        │
  │        >     #4      1.0 MB     f  swap          swap          ▒        │
  │        >            16.8 GB        FREE SPACE                  ▒        │
  │        >     #5     22.4 GB     f  ext3          /home         ▒        │
  │        >           344.1 kB        FREE SPACE                  ▒        │
  │                                                                         │
  │                                                                         │
  │     <Go Back>                                                           │
  │                                                                         │

<F1> for help; <Tab> moves; <Space> selects; <Enter> activates buttons

    ┌───────────────────────┤ [!!] Partition disks ├───────────────────────┐
    │                                                                      │
    │ The attempt to mount a file system with type ext3 in SCSI5 (0,0,0),  │
    │ partition #2 (sdb) at / failed.                                      │
    │                                                                      │
    │ You may resume partitioning from the partitioning menu.              │
    │                                                                      │
    │ Do you want to resume partitioning?                                  │
    │                                                                      │
    │     <Go Back>                                      <Yes>    <No>     │
    │                                                                      │

<Tab> moves; <Space> selects; <Enter> activates buttons

--- End Message ---
--- Begin Message ---
Source: partman-base
Source-Version: 143

We believe that the bug you reported is fixed in the latest version of
partman-base, which is due to be installed in the Debian FTP archive:

  to main/p/partman-base/partman-base_143.dsc
  to main/p/partman-base/partman-base_143.tar.gz
  to main/p/partman-base/partman-base_143_i386.udeb
  to main/p/partman-base/partman-utils_143_i386.udeb

A summary of the changes between this version and the previous one is

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 579948@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
Colin Watson <cjwatson@debian.org> (supplier of updated partman-base package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)

Hash: SHA256

Format: 1.8
Date: Tue, 03 Aug 2010 17:22:00 +0100
Source: partman-base
Binary: partman-base partman-utils
Architecture: source i386
Version: 143
Distribution: unstable
Urgency: low
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Colin Watson <cjwatson@debian.org>
 partman-base - Partition the storage devices (partman) (udeb)
 partman-utils - Utilities related to partitioning (udeb)
Closes: 579948
 partman-base (143) unstable; urgency=low
   * Use 'dh $@ --options' rather than 'dh --options $@', for
     forward-compatibility with debhelper v8.
   * If the PED_DISK_CYLINDER_ALIGNMENT flag isn't available, then
     (confusingly) assume that only cylinder alignment is available and
     calculate constraints accordingly (closes: #579948).
   [ Updated translations ]
   * Serbian (sr.po) by Janos Guljas
   * Serbian Latin (sr@latin.po) by Karolina Kalic
 55ae26610e2062dbdcfa601166239169d34c1a3d 1714 partman-base_143.dsc
 4243cc40f0ac1fcf894fdc9c14c2465f1ba57377 183170 partman-base_143.tar.gz
 0debad128301762377605590ab537eb8c9c40ea0 139732 partman-base_143_i386.udeb
 0441208087fb0d0b6129ef85d4b85d36d5d00417 3490 partman-utils_143_i386.udeb
 26315443a9ad0c2cd97d9d8cfd3170bf94c9b4ded59701187bd3811a9de8d2a1 1714 partman-base_143.dsc
 6f9490522dd9d78b8828099e6d6aa856b7d4f41c55eff30654a9d1289b3fbcbb 183170 partman-base_143.tar.gz
 3f0b66e953f1e9b987c9fd3712b7992a5c7805fa0b9a91279653a6b5948993d7 139732 partman-base_143_i386.udeb
 ddec6b0015d37ccf15740ec0bc65f65da567f93d072990bf75639f3995754d68 3490 partman-utils_143_i386.udeb
 84336b0403c8cb6753990031131796f9 1714 debian-installer standard partman-base_143.dsc
 13923a234fc5ca7ea85cd13116253740 183170 debian-installer standard partman-base_143.tar.gz
 15b86a56faf2c7b98bb8a2d05d884b5d 139732 debian-installer standard partman-base_143_i386.udeb
 88d3db6c9276a27ed3a13cb4cf0a74c3 3490 debian-installer extra partman-utils_143_i386.udeb
Package-Type: udeb

Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Colin Watson <cjwatson@debian.org> -- Debian developer


--- End Message ---

Reply to: