--- Begin Message ---
Package: installation-reports
Boot method: netinst CD
Image version: http://cdimage.debian.org/cdimage/squeeze_di_alpha1/ia64/iso-cd/debian-testing-ia64-netinst.iso 17-Feb-2010 23:23
Date: 05-Mar-2010 13:30 PST
Machine: HP Integrity rx2600
Processor: Itanium2
Memory: 10GB
Partitions: *Fibre channel disks not found*
Output of lspci -knn (or lspci -nn):
00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41)
Subsystem: NEC Corporation USB [1033:0035]
Kernel driver in use: ohci_hcd
00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41)
Subsystem: NEC Corporation USB [1033:0035]
Kernel driver in use: ohci_hcd
00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 02)
Subsystem: NEC Corporation USB 2.0 [1033:00e0]
Kernel driver in use: ehci_hcd
00:02.0 IDE interface [0101]: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to)
Subsystem: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host C]
Kernel driver in use: CMD64x_IDE
00:03.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pr)
Subsystem: Hewlett-Packard Company Device [103c:1274]
20:01.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X)
Subsystem: LSI Logic / Symbios Logic Device [1000:1000]
Kernel driver in use: mptspi
20:01.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X)
Subsystem: LSI Logic / Symbios Logic Device [1000:1000]
Kernel driver in use: mptspi
20:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5701 Giga)
Subsystem: Hewlett-Packard Company Device [103c:12a4]
40:01.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1010 66MHz)
Subsystem: Hewlett-Packard Company Device [103c:1340]
Kernel driver in use: sym53c8xx
40:01.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1010 66MHz)
Subsystem: Hewlett-Packard Company Device [103c:1340]
Kernel driver in use: sym53c8xx
60:01.0 Fibre Channel [0c04]: QLogic Corp. ISP2312-based 2Gb Fibre Channel to P)
Subsystem: QLogic Corp. Device [1077:0100]
80:01.0 Network controller [0280]: Quadrics Ltd QsNetII Elan4 Network Adapter []
c0:01.0 Fibre Channel [0c04]: QLogic Corp. ISP2312-based 2Gb Fibre Channel to P)
Subsystem: QLogic Corp. Device [1077:0100]
e0:01.0 Communication controller [0780]: Hewlett-Packard Company Auxiliary Diva)
Subsystem: Hewlett-Packard Company Device [103c:1291]
Kernel driver in use: serial
e0:01.1 Serial controller [0700]: Hewlett-Packard Company Diva Serial [GSP] Mul)
Subsystem: Hewlett-Packard Company Device [103c:1282]
Kernel driver in use: serial
e0:02.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY ]
Subsystem: Hewlett-Packard Company Device [103c:12ab]
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [E]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
This machine has two QLogic fibre channel cards adapters requiring
'ql2300_fw.bin', which the installer asks for. Inserting a
vfat-formatted USB pen drive with the Debian firmware package
'firmware-qlogic_0.22_all.deb' does not work. In Expert Install mode,
I see that at this very early stage of the installation process the
directory:
/lib/modules/2.6.30-2-itanium/kernel/fs
has neither the 'ext3' nor 'fat' filesystem module, which appears to
prevent the installer from finding the firmware. The Lenny ia64
netinst CD suffers from the same problem. I just tried a similar
installation sequence using the squeeze_di_alpha1 i386 installer and
found that the 'fat' module is present at this early stage. Thanks.
--- End Message ---
--- Begin Message ---
Source: debian-installer
Source-Version: 20100719
We believe that the bug you reported is fixed in the latest version of
debian-installer, which is due to be installed in the Debian FTP archive:
debian-installer-images_20100719_amd64.tar.gz byhand
debian-installer_20100719.dsc
to main/d/debian-installer/debian-installer_20100719.dsc
debian-installer_20100719.tar.gz
to main/d/debian-installer/debian-installer_20100719.tar.gz
debian-installer_20100719_amd64.deb
to main/d/debian-installer/debian-installer_20100719_amd64.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 572724@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Otavio Salvador <otavio@debian.org> (supplier of updated debian-installer package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Mon, 19 Jul 2010 12:05:17 -0300
Source: debian-installer
Binary: debian-installer
Architecture: source amd64
Version: 20100719
Distribution: unstable
Urgency: low
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Otavio Salvador <otavio@debian.org>
Description:
debian-installer - Debian installer
Closes: 572724 580714
Changes:
debian-installer (20100719) unstable; urgency=low
.
[ Theppitak Karoonboonyanan ]
* Add needed characters for Thai.
.
[ Christian Perrier ]
* Remove Thai from the list of languages only supported with the
graphical cdebconf frontend.
* Activate needed characters for Persian
.
[ Frans Pop ]
* sparc: add components needed to load firmware for netboot images.
* Update pkg-lists for changes in auto-install (1.7). Main benefit is that
netcfg will no longer get pulled in on images that shouldn't have it.
* ia64: add support for loading firmware to images. Closes: #572724.
* Fix building with alternative LOCALUDEBDIR.
* Ensure glyphs used in the translated right column of localechooser are
included in images to avoid incomplete display of the languagelist when
some translations are dropped through DROP_LANG.
* Drop auto-install from pkg-lists now that it has been integrated in
the preseed udebs.
.
[ Otavio Salvador ]
* Switch amd64, i386, hppa, powerpc, mipsel, s390, ia64, mips, sparc to
2.6.32.
.
[ Martin Michlmayr ]
* Switch armel to 2.6.32.
* QNAP: make the check for a valid MAC address more reliable.
* QNAP: add a check to ensure that the right installer files for the
user's QNAP model are used.
* OpenRD-Base and OpenRD-Client can use the same image, so provide
only one generic image for OpenRD.
* QNAP: Copy uLinux.conf in case it's not there so we can identify
the QNAP model.
* QNAP: recognize Fujitsu Q600 and Q700.
* Generate an image for GuruPlug.
* Generate an image for HP t5325 Thin Client (but it requires a
serial console).
* Generate an image for QNAP TS-41x.
* Add a netboot image for SS4000-e.
* armel: Don't pretend that network-console images are "netboot"
images.
.
[ Cyril Brulebois ]
* Warn if only the 'build' directory has been checked out instead of the
full source of the 'debian-installer' package.
* Fix boot splash images to use 640x480. See #571045 for details.
.
[ Cyril Brulebois / Frans Pop ]
* Switch graphical installer from DirectFb to X.Org backend
- include xserver-xorg udebs for G-I images
- use console-setup instead of kbd-chooser for G-I images
- exclude X.Org modules from library reduction
- stop including libgcc_s.so.1 in G-I images; it's not needed with X.Org
* Enable graphical installer build targets again. With many thanks to
Cyril Brulebois, Julien Cristau and others who have contributed to
implementing the X.Org backend.
.
[ Frans Pop ]
* G-I: include gtk2-engines-udeb through pkg-lists.
* Add check for incorrect file attributes on device nodes, which can occur
when using fakeroot after restarting a (failed) build.
* x86: update info about disabling framebuffer in F8 syslinux help screen.
.
[ Aurelien Jarno ]
* mips/mipsel: re-enable Broadcom SWARM (sb1-bcm91250a) support.
.
[ Ryan Tandy ]
* Create images for Buffalo Linkstation Pro/Live. Closes: #580714
.
[ Otavio Salvador ]
* Move amd64, sparc, mipsel and i386 to linux 2.6.32 (ABI 5).
.
[ Samuel Thibault ]
* hurd-i386: Fix boot menu ramdisk support.
.
[ Otavio Salvador ]
* Move hppa, ia64, powerpc and s390 to linux 2.6.32 (ABI 5).
.
[ Jeremie Koenig ]
* util/get-packages: fix selection of the most recent packages.
.
[ Colin Watson ]
* Support new apt mirror method, available from apt 0.7.26~exp6.
Checksums-Sha1:
11c5ca27da31014e0f9965472e2d913d2ea94e5a 3077 debian-installer_20100719.dsc
029768e0d6f347875d13ddbc2dd1c42e82d70610 1318410 debian-installer_20100719.tar.gz
0bf692b0cc44ca7e638f6005e9dac83e1e4771ab 829110 debian-installer_20100719_amd64.deb
5027f9bb969870b6f0110b9ca8a8677d43339f02 169146924 debian-installer-images_20100719_amd64.tar.gz
Checksums-Sha256:
096aae3650deee7b8c8b2db51c00aee5faaafb26decdc334bf45e1da6b0a19ed 3077 debian-installer_20100719.dsc
d8a81b893d8247056da4c17eaa30a3a9a368fa8dbb31ebbcf54a28a8b2a00e32 1318410 debian-installer_20100719.tar.gz
72cce40f0caea067c728c75e07d4c3d784db59a2c63093cca19c9cf32ecd30eb 829110 debian-installer_20100719_amd64.deb
0a9dcc503553b6604498c0174e0ea9c0b8c9e97001527828cf5e06c117338abf 169146924 debian-installer-images_20100719_amd64.tar.gz
Files:
b890c7e95160e4700e57320e75fe8711 3077 devel optional debian-installer_20100719.dsc
9ff667bd4d47f3b4f546d50e94db6b58 1318410 devel optional debian-installer_20100719.tar.gz
0752b9a24530fcf7b086dad9a8af7e25 829110 devel optional debian-installer_20100719_amd64.deb
688419591282d687d7e54f681a33b6d0 169146924 raw-installer - debian-installer-images_20100719_amd64.tar.gz
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=E1r+
-----END PGP SIGNATURE-----
--- End Message ---