Bug#519079: installation-report: please provide an option to skip the attempt to set the system clock via NTP
Package: installation-reports
Version: 2.38
Severity: minor
*** Please type your report below this line ***
Dear d-i team,
last weekend I installed Debian Lenny and it worked like a charm
(yay!). Please note that I decided to use the d-i images provided by
Kenshi Muto in order to get my network card to work during
installation (see #512546). Afaict only the kernel package has been
replaced on his installation media.
However, there was one thing during installation that I found
annoying: My computer is behind a firewall that even blocks NTP
requests, so there is no chance to set the clock over the network. I
know this, so I wasn't too excited when d-i's first attempt to set the
clock apparently failed. It also did not upset me, when it failed a
second and a third time, but I really became impatient when it tried a
forth time and I really hesitated to click on the "Cancel" button for
a second. Fortunately it gave up after the fifth try.
Now my request is, please add a "Skip" button for people who know that
setting the clock over the net won't work and who deliberately want to
skip this step. It isn't a crucial step for installation anyway.
At least, if you don't find another button an appropriate solution,
please report to the user how many attempts you are still going to try
before d-i skips this step itself. Something like "Attempt number 3 of
5." below the progress bar would have actually appeased me. The way it
is now, some users might get the impression that the installation
actually hangs and feel tempted to abort it after the second or third
try failed without a feedback.
Thank you very much!
Cheers,
Fabian
-- Package-specific info:
Boot method: CD
Image version: http://mirror.home-dn.net/d-i/2.6.28/lenny-custom-0302.iso
Date: <Date and time of the install>
Machine: DELL Optiplex 760
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [E]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [E]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
I gave "Detect network card" an "E" because I had to use unofficial
installation media in order to install the system because of the usage
of an outdated Linux kernel.
I gave "Clock/timezone setup" an "E" because of the minor issue I
described above.
Everything else worked just perfectly. Great job!
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="5.0 (lenny) - installer build 20090302-13:09"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux frodo 2.6.28-1-486 #1 Mon Feb 23 02:22:20 UTC 2009
i686 unknown
lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 4 Series
Chipset DRAM Controller [8086:2e10] (rev 03)
lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation 4 Series
Chipset PCI Express Root Port [8086:2e11] (rev 03)
lspci -knn: Kernel driver in use: pcieport-driver
lspci -knn: 00:03.0 Communication controller [0780]: Intel Corporation
4 Series Chipset HECI Controller [8086:2e14] (rev 03)
lspci -knn: 00:03.2 IDE interface [0101]: Intel Corporation 4 Series
Chipset PT IDER Controller [8086:2e16] (rev 03)
lspci -knn: 00:03.3 Serial controller [0700]: Intel Corporation 4
Series Chipset Serial KT Controller [8086:2e17] (rev 03)
lspci -knn: Kernel driver in use: serial
lspci -knn: 00:19.0 Ethernet controller [0200]: Intel Corporation
82567LM-3 Gigabit Network Connection [8086:10de] (rev 02)
lspci -knn: Kernel driver in use: e1000e
lspci -knn: Kernel modules: e1000e
lspci -knn: 00:1a.0 USB Controller [0c03]: Intel Corporation ICH10 USB
UHCI Controller #4 [8086:3a67] (rev 02)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:1a.1 USB Controller [0c03]: Intel Corporation ICH10 USB
UHCI Controller #5 [8086:3a68] (rev 02)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:1a.2 USB Controller [0c03]: Intel Corporation ICH10 USB
UHCI Controller #6 [8086:3a69] (rev 02)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:1a.7 USB Controller [0c03]: Intel Corporation ICH10
USB2 EHCI Controller #2 [8086:3a6c] (rev 02)
lspci -knn: Kernel driver in use: ehci_hcd
lspci -knn: Kernel modules: ehci-hcd
lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation ICH10 HD
Audio Controller [8086:3a6e] (rev 02)
lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation ICH10 PCI
Express Port 1 [8086:3a70] (rev 02)
lspci -knn: Kernel driver in use: pcieport-driver
lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation ICH10 PCI
Express Port 2 [8086:3a72] (rev 02)
lspci -knn: Kernel driver in use: pcieport-driver
lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation ICH10 USB
UHCI Controller #1 [8086:3a64] (rev 02)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation ICH10 USB
UHCI Controller #2 [8086:3a65] (rev 02)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:1d.2 USB Controller [0c03]: Intel Corporation ICH10 USB
UHCI Controller #3 [8086:3a66] (rev 02)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:1d.7 USB Controller [0c03]: Intel Corporation ICH10
USB2 EHCI Controller #1 [8086:3a6a] (rev 02)
lspci -knn: Kernel driver in use: ehci_hcd
lspci -knn: Kernel modules: ehci-hcd
lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI
Bridge [8086:244e] (rev a2)
lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation ICH10 LPC
Interface Controller [8086:3a1a] (rev 02)
lspci -knn: 00:1f.2 IDE interface [0101]: Intel Corporation ICH10 4
port SATA IDE Controller [8086:3a00] (rev 02)
lspci -knn: Kernel driver in use: ata_piix
lspci -knn: Kernel modules: ata_piix
lspci -knn: 00:1f.3 SMBus [0c05]: Intel Corporation ICH10 SMBus
Controller [8086:3a60] (rev 02)
lspci -knn: 00:1f.5 IDE interface [0101]: Intel Corporation ICH10 2
port SATA IDE Controller [8086:3a06] (rev 02)
lspci -knn: Kernel driver in use: ata_piix
lspci -knn: Kernel modules: ata_piix
lspci -knn: 01:00.0 VGA compatible controller [0300]: ATI Technologies
Inc RV610 [Radeon HD 2400 XT] [1002:94c1]
lsmod: Module Size Used by
lsmod: ufs 62468 0
lsmod: qnx4 7556 0
lsmod: ntfs 179108 0
lsmod: dm_mod 46508 0
lsmod: md_mod 69652 0
lsmod: xfs 438568 0
lsmod: reiserfs 186036 0
lsmod: jfs 144396 0
lsmod: ext3 103304 2
lsmod: jbd 35732 1 ext3
lsmod: vfat 8704 0
lsmod: fat 42012 1 vfat
lsmod: ext2 52104 0
lsmod: mbcache 6784 2 ext3,ext2
lsmod: e1000e 96944 0
lsmod: nls_utf8 1664 2
lsmod: isofs 27016 0
lsmod: nls_base 6400 6 ntfs,jfs,vfat,fat,nls_utf8,isofs
lsmod: zlib_inflate 15104 1 isofs
lsmod: rsrc_nonstatic 9600 0
lsmod: pcmcia_core 30736 1 rsrc_nonstatic
lsmod: ide_generic 2436 0 [permanent]
lsmod: ide_core 94364 1 ide_generic
lsmod: usb_storage 79752 0
lsmod: fan 4356 0
lsmod: sg 25008 0
lsmod: sr_mod 12836 0
lsmod: cdrom 29848 1 sr_mod
lsmod: sd_mod 27796 4
lsmod: crc_t10dif 1792 1 sd_mod
lsmod: evdev 7940 3
lsmod: usbhid 28116 0
lsmod: hid 33740 1 usbhid
lsmod: psmouse 40724 0
lsmod: ata_piix 19332 3
lsmod: libata 149088 1 ata_piix
lsmod: scsi_mod 136080 5 usb_storage,sg,sr_mod,sd_mod,libata
lsmod: ehci_hcd 29964 0
lsmod: uhci_hcd 19216 0
lsmod: usbcore 121024 5
usb_storage,usbhid,ehci_hcd,uhci_hcd
lsmod: parport_pc 22160 0
lsmod: parport 29896 1 parport_pc
lsmod: thermal 15132 0
lsmod: processor 35120 1 thermal
lsmod: thermal_sys 10400 3 fan,thermal,processor
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 452752 52 452700 0% /dev
df: /dev/sda3 6728312 3276500 3110032 51% /target
df: /dev/sda7 79782948 184232 75545920 0% /target/home
df: /dev/sda3 6728312 3276500 3110032 51%
/dev/.static/dev
df: tmpfs 452752 52 452700 0% /target/dev
free: total used free shared
buffers
free: Mem: 905508 751980 153528 0
1716
free: Swap: 2650684 0 2650684
free: Total: 3556192 751980 2804212
/proc/cmdline: video=vesa:ywrap,mtrr vga=788
initrd=/install.386/gtk/initrd.gz -- quiet
BOOT_IMAGE=/install.386/vmlinuz
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 23
/proc/cpuinfo: model name : Intel(R) Core(TM)2 Duo CPU E8400 @
3.00GHz
/proc/cpuinfo: stepping : 10
/proc/cpuinfo: cpu MHz : 2992.464
/proc/cpuinfo: cache size : 6144 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 13
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep
mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht
tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor
ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm
tpr_shadow vnmi flexpriority
/proc/cpuinfo: bogomips : 5984.92
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-0060 : keyboard
/proc/ioports: 0064-0064 : keyboard
/proc/ioports: 0070-007f : rtc0
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : 0000:00:1f.2
/proc/ioports: 0170-0177 : ata_piix
/proc/ioports: 01f0-01f7 : 0000:00:1f.2
/proc/ioports: 01f0-01f7 : ata_piix
/proc/ioports: 0376-0376 : 0000:00:1f.2
/proc/ioports: 0376-0376 : ata_piix
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 03f6-03f6 : 0000:00:1f.2
/proc/ioports: 03f6-03f6 : ata_piix
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0800-085f : pnp 00:01
/proc/ioports: 0800-0803 : ACPI PM1a_EVT_BLK
/proc/ioports: 0804-0805 : ACPI PM1a_CNT_BLK
/proc/ioports: 0808-080b : ACPI PM_TMR
/proc/ioports: 0810-0815 : ACPI CPU throttle
/proc/ioports: 0820-082f : ACPI GPE0_BLK
/proc/ioports: 0860-08ff : pnp 00:01
/proc/ioports: 0c00-0c7f : pnp 00:01
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: d000-dfff : PCI Bus 0000:01
/proc/ioports: dc00-dcff : 0000:01:00.0
/proc/ioports: ec98-ec9f : 0000:00:03.3
/proc/ioports: ec98-ec9f : serial
/proc/ioports: eca0-ecaf : 0000:00:1f.2
/proc/ioports: eca0-ecaf : ata_piix
/proc/ioports: ecb0-ecbf : 0000:00:1f.5
/proc/ioports: ecb0-ecbf : ata_piix
/proc/ioports: ecc0-ecdf : 0000:00:19.0
/proc/ioports: ece0-ecff : 0000:00:1f.3
/proc/ioports: fc00-fc1f : 0000:00:1a.2
/proc/ioports: fc00-fc1f : uhci_hcd
/proc/ioports: fe40-fe47 : 0000:00:1f.5
/proc/ioports: fe40-fe47 : ata_piix
/proc/ioports: fe50-fe53 : 0000:00:1f.5
/proc/ioports: fe50-fe53 : ata_piix
/proc/ioports: fe60-fe67 : 0000:00:1f.5
/proc/ioports: fe60-fe67 : ata_piix
/proc/ioports: fe70-fe73 : 0000:00:1f.5
/proc/ioports: fe70-fe73 : ata_piix
/proc/ioports: fe80-fe87 : 0000:00:03.2
/proc/ioports: fe90-fe93 : 0000:00:03.2
/proc/ioports: fea0-fea7 : 0000:00:03.2
/proc/ioports: feb0-feb3 : 0000:00:03.2
/proc/ioports: fec0-fecf : 0000:00:1f.2
/proc/ioports: fec0-fecf : ata_piix
/proc/ioports: fed0-fedf : 0000:00:1f.5
/proc/ioports: fed0-fedf : ata_piix
/proc/ioports: fef0-feff : 0000:00:03.2
/proc/ioports: ff00-ff1f : 0000:00:1a.1
/proc/ioports: ff00-ff1f : uhci_hcd
/proc/ioports: ff20-ff3f : 0000:00:1a.0
/proc/ioports: ff20-ff3f : uhci_hcd
/proc/ioports: ff40-ff5f : 0000:00:1d.2
/proc/ioports: ff40-ff5f : uhci_hcd
/proc/ioports: ff60-ff7f : 0000:00:1d.1
/proc/ioports: ff60-ff7f : uhci_hcd
/proc/ioports: ff80-ff9f : 0000:00:1d.0
/proc/ioports: ff80-ff9f : uhci_hcd
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cefff : Video ROM
/proc/iomem: 000d1000-000d3fff : Adapter ROM
/proc/iomem: 000f0000-000fffff : reserved
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-cfdffbff : System RAM
/proc/iomem: 00100000-002d0ff0 : Kernel code
/proc/iomem: 002d0ff1-003ab6e7 : Kernel data
/proc/iomem: 00411000-0048ece7 : Kernel bss
/proc/iomem: cfdffc00-cfe53bff : ACPI Non-volatile Storage
/proc/iomem: cfe53c00-cfe55bff : ACPI Tables
/proc/iomem: cfe55c00-cfffffff : reserved
/proc/iomem: d0000000-dfffffff : PCI Bus 0000:01
/proc/iomem: d0000000-dfffffff : 0000:01:00.0
/proc/iomem: d0000000-d0ffffff : vesafb
/proc/iomem: e0000000-efffffff : PCI MMCONFIG 0
/proc/iomem: e0000000-efffffff : reserved
/proc/iomem: fe700000-fe7fffff : PCI Bus 0000:03
/proc/iomem: fe800000-fe8fffff : PCI Bus 0000:02
/proc/iomem: fe900000-feafffff : PCI Bus 0000:01
/proc/iomem: fe9f0000-fe9fffff : 0000:01:00.0
/proc/iomem: fea00000-fea1ffff : 0000:01:00.0
/proc/iomem: febd8000-febd8fff : 0000:00:03.3
/proc/iomem: febd9000-febd9fff : 0000:00:19.0
/proc/iomem: febd9000-febd9fff : e1000e
/proc/iomem: febda000-febda3ff : 0000:00:1a.7
/proc/iomem: febda000-febda3ff : ehci_hcd
/proc/iomem: febdb000-febdb0ff : 0000:00:1f.3
/proc/iomem: febdc000-febdffff : 0000:00:1b.0
/proc/iomem: febe0000-febfffff : 0000:00:19.0
/proc/iomem: febe0000-febfffff : e1000e
/proc/iomem: fec00000-fed003ff : reserved
/proc/iomem: fec00000-fec00fff : IOAPIC 0
/proc/iomem: fed00000-fed003ff : HPET 0
/proc/iomem: fed20000-fed9ffff : reserved
/proc/iomem: feda6000-feda600f : 0000:00:03.0
/proc/iomem: fee00000-feefffff : reserved
/proc/iomem: fee00000-fee00fff : Local APIC
/proc/iomem: ff980000-ff9803ff : 0000:00:1d.7
/proc/iomem: ff980000-ff9803ff : ehci_hcd
/proc/iomem: ffb00000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 9627 IO-APIC-edge timer
/proc/interrupts: 1: 2 IO-APIC-edge i8042
/proc/interrupts: 4: 2 IO-APIC-edge
/proc/interrupts: 7: 0 IO-APIC-edge parport0
/proc/interrupts: 8: 22 IO-APIC-edge rtc0
/proc/interrupts: 9: 0 IO-APIC-fasteoi acpi
/proc/interrupts: 12: 4 IO-APIC-edge i8042
/proc/interrupts: 14: 137852 IO-APIC-edge ata_piix
/proc/interrupts: 15: 2933 IO-APIC-edge ata_piix
/proc/interrupts: 16: 29 IO-APIC-fasteoi uhci_hcd:usb1
/proc/interrupts: 17: 4591 IO-APIC-fasteoi uhci_hcd:usb2,
uhci_hcd:usb5
/proc/interrupts: 18: 0 IO-APIC-fasteoi uhci_hcd:usb6,
ata_piix
/proc/interrupts: 22: 4 IO-APIC-fasteoi uhci_hcd:usb3,
ehci_hcd:usb7
/proc/interrupts: 23: 0 IO-APIC-fasteoi uhci_hcd:usb4,
ehci_hcd:usb8
/proc/interrupts: 283: 289932 PCI-MSI-edge eth0
/proc/interrupts: 287: 86665 HPET_MSI-edge hpet2
/proc/interrupts: NMI: 0 Non-maskable interrupts
/proc/interrupts: LOC: 377 Local timer interrupts
/proc/interrupts: SPU: 0 Spurious interrupts
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 905508 kB
/proc/meminfo: MemFree: 153336 kB
/proc/meminfo: Buffers: 1716 kB
/proc/meminfo: Cached: 685480 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 159616 kB
/proc/meminfo: Inactive: 491220 kB
/proc/meminfo: Active(anon): 1736 kB
/proc/meminfo: Inactive(anon): 12172 kB
/proc/meminfo: Active(file): 157880 kB
/proc/meminfo: Inactive(file): 479048 kB
/proc/meminfo: Unevictable: 50220 kB
/proc/meminfo: Mlocked: 0 kB
/proc/meminfo: SwapTotal: 2650684 kB
/proc/meminfo: SwapFree: 2650684 kB
/proc/meminfo: Dirty: 1376 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 13880 kB
/proc/meminfo: Mapped: 7476 kB
/proc/meminfo: Slab: 38260 kB
/proc/meminfo: SReclaimable: 32560 kB
/proc/meminfo: SUnreclaim: 5700 kB
/proc/meminfo: PageTables: 320 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 3103436 kB
/proc/meminfo: Committed_AS: 65768 kB
/proc/meminfo: VmallocTotal: 122880 kB
/proc/meminfo: VmallocUsed: 10356 kB
/proc/meminfo: VmallocChunk: 110960 kB
/proc/meminfo: HugePages_Total: 0
/proc/meminfo: HugePages_Free: 0
/proc/meminfo: HugePages_Rsvd: 0
/proc/meminfo: HugePages_Surp: 0
/proc/meminfo: Hugepagesize: 4096 kB
/proc/meminfo: DirectMap4k: 7840 kB
/proc/meminfo: DirectMap4M: 909312 kB
/proc/bus/input/devices: I: Bus=0003 Vendor=413c Product=3012 Version=0111
/proc/bus/input/devices: N: Name="Dell Dell USB Optical Mouse"
/proc/bus/input/devices: P: Phys=usb-0000:00:1a.1-1/input0
/proc/bus/input/devices: S:
Sysfs=/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=mouse0 event0
/proc/bus/input/devices: B: EV=17
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=413c Product=2101 Version=0111
/proc/bus/input/devices: N: Name="Dell Dell Smart Card Reader Keyboard"
/proc/bus/input/devices: P: Phys=usb-0000:00:1a.1-2/input0
/proc/bus/input/devices: S:
Sysfs=/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/input/input1
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd event1
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=10000 7 ff9f207a c14057ff febeffdf
ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices:
/proc/fb: 0 VESA VGA
/etc/directfbrc: quiet
/etc/directfbrc: no-hardware
/etc/directfbrc: bg-color=ffdcdad5
/etc/directfbrc: screenshot-dir=/var/log
/etc/directfbrc: #disable-module=linux_input
/etc/directfbrc: #disable-module=keyboard
/etc/directfbrc: disable-module=ps2mouse
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.28-1-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:3.0.3-2 Linux PCI Utilities
ii reportbug 3.48 reports bugs in the
Debian distrib
installation-report suggests no packages.
-- no debconf information
--
Dipl.-Phys. Fabian Greffrath
Ruhr-Universität Bochum
Lehrstuhl für Energieanlagen und Energieprozesstechnik (LEAT)
Universitätsstr. 150, IB 3/134
D-44780 Bochum
Telefon: +49 (0)234 / 32-26334
Fax: +49 (0)234 / 32-14227
E-Mail: greffrath@leat.ruhr-uni-bochum.de
Reply to: