AW: STP vs. DHCP during Debian pxeboot installs
enabling Port-Fast Mode on the switch ports could be a solution for this problem too.
It will not block the port until a loop is detected.
Without Port-Fast, STP will block a port until no loop is detected.
Von: firstname.lastname@example.org [mailto:email@example.com] Im Auftrag von Jim Freeman
Gesendet: Freitag, 18. September 2009 19:45
An: firstname.lastname@example.org; email@example.com
Betreff: STP vs. DHCP during Debian pxeboot installs
When performing unattended Debian installations across a network, some
switch protocols/configurations thwart required DHCP negotiation by
simply blocking traffic for a time, and DHCP gives up after its default
For instance, in installing some Dell M610 blades (Broadcom NetXtreme II
adapters - bnx2 linux driver module) within Cisco switch fabric running
STP (Spanning Tree Protocol), interface traffic is blocked until STP can
determine that the port coming on-line does not introduce any switching
loops. The DHCP requests being sent during that time just fall on the
floor, and DHCP gives up before it's ever really given a chance.