Bug#542963: Installation-reports
Package: installation-reports
Boot method: CD
Image version: debian-502a-powerpc-netinst
Date: Aug 21, 2009 about 10PM to Aug 22 early AM
Machine: Imac 6GB 512K-L2 Model M5521
Processor: G3 350MHz
Memory: 64MB
Partitions: Guided whole disk
Output of lspci -knn: (copied by hand from adjacent screen)
0000:00:0b.0 Host bridge [0600] Apple Computer Inc. UniNorth AGP
[106b:0020]
Kernel driver in use: agpgart-uninorth
Kernel modules: uninorth-agp
0000:00:10.0 Display controller [0380]: ATI Technologies Inc Rage 128
RL/VR AGP [1002:524c]
0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth PCI
[106b:001f]
Kernel modules: uninorth-agp
001:10:17.0 Class [ff00]: Apple Computer Inc. KeyLargo Mac I/O
[106b:0022] (rev02)
Kernel driver in use: macio
0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB
[106b:0019]
Kernel driver in use: ohci_hcd
0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB
[106b:0019]
Kernel driver in use: ohci_hcd
0002:20:0b.0 Host Bridge [0600]: Apple Computer Inc. UniNorth Internal
PCI [106b:001e]
Kernel modules: uninorth-agp
0002:20:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth
GMAC (Sun GEM) [106b:0021]
Kernel driver in use gem
Kernel modules: sungem
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O ]
Detect network card: [O ]
Configure network: [O ]
Detect CD: [O ]
Load installer modules: [O ]
Detect hard drives: [O ]
Partition hard drives: [O ]
Install base system: [O ]
Clock/timezone setup: [O ]
User/password setup: [O ]
Install tasks: [O ]
Install boot loader: [O ]
Overall install: [O ]
Comments/Problems:
Installation OK with ofvideo option. Reboot fails on X.org XServer 1.4.2
error
(WW)****Invalid IO Allocation**
b: 0xf000400 e: 0xf00001ff
correcting ^G
(EE)end of block range 0xefffffff<begin 0xf0000000
(EE)unable to find a valid famebuffer device
(EE)R128(0): Failed to open framebuffer device, consult warnings
and/or error above for possible reasons.
(EE)Screens(s) found but none have a useable configuration.
Fatal Service Error
Command line operation useable but:
reportbug not usable because ISP uses GMAIL which requires SSL coding.
Machine does not show up in network windows of adjacent Debian computer
using
Gnome. Command scp cannot find adjacent computer.
USB flash stick is recognized but cannot be mounted.
All of above computer outputs copied by looking at adjacent screen and
typing
into this machine.
/etc/X11/xorg.conf has no content (zero lines long).
Reply to: