[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#423437: marked as done (parted-server: hangs on "command_set_name" if name is empty)

Your message dated Wed, 04 Mar 2009 11:32:05 +0000
with message-id <E1LepKX-0001u3-Ts@ries.debian.org>
and subject line Bug#268495: fixed in partman-base 129
has caused the Debian Bug report #268495,
regarding parted-server: hangs on "command_set_name" if name is empty
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org

268495: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=268495
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports

Boot method: CD
Image version: debian-etch-4.0-x84_64.iso
Date: 20070511

Machine: supermicro 2U server
Processor: 2 x quad core xeon
Memory: 8GB
Partitions: doesn't matter

Output of lspci -nn and lspci -vnn:
Machine is equiped with 3ware 9650 raid6 controller 
with 8x 750GB sata disks.

machine isn't  booting yet

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [OK]
Detect network card:    [OK]
Configure network:      [OK]
Detect CD:              [OK ]
Load installer modules: [OK ]
Detect hard drives:     [ OK]
Partition hard drives:  [ OK]
Install base system:    [ OK]
Clock/timezone setup:   [ OK]
User/password setup:    [ OK]
Install tasks:          [ OK]
Install boot loader:    [ E]
Overall install:        [ ]


This machine uses some kind of EFI instead of bios.
GRUB barfes, but lilo installs
lilo gave an error, so i rebooted with CD in EXPERT mode
i ran the partition disk option, it recognized all partitons.
while trying to mount them at the right positions i accidentally
hit the"name" tag, since i would want to use that i left it empty
and hit return.
The whole install procedure than stalls
even pressing control-C and go back to main menu you wont 
be able to start  a new partiion manager again

this is (imho) a bug.

Kind regards,


--- End Message ---
--- Begin Message ---
Source: partman-base
Source-Version: 129

We believe that the bug you reported is fixed in the latest version of
partman-base, which is due to be installed in the Debian FTP archive:

  to pool/main/p/partman-base/partman-base_129.dsc
  to pool/main/p/partman-base/partman-base_129.tar.gz
  to pool/main/p/partman-base/partman-base_129_i386.udeb
  to pool/main/p/partman-base/partman-utils_129_i386.udeb

A summary of the changes between this version and the previous one is

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 268495@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
Colin Watson <cjwatson@debian.org> (supplier of updated partman-base package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)

Hash: SHA1

Format: 1.8
Date: Wed, 04 Mar 2009 11:11:31 +0000
Source: partman-base
Binary: partman-base partman-utils
Architecture: source i386
Version: 129
Distribution: unstable
Urgency: low
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Colin Watson <cjwatson@debian.org>
 partman-base - Partition the storage devices (partman) (udeb)
 partman-utils - Utilities related to partitioning (udeb)
Closes: 268495 322922 505477
 partman-base (129) unstable; urgency=low
   [ Colin Watson ]
   * Merge from Ubuntu:
     - Disable backup while displaying device/partition locked errors; it
       makes no sense and it can cause us to exit without closing the FIFO to
       parted_server (closes: #505477, LP: #274219).
     - Add support for explicit 'b' or 'B' suffixes on partition sizes to
       force interpretation as bytes (closes: #322922).
     - Add a small test suite for longint2human and human2longint.
     - Exclude /dev/ramzswap devices (http://code.google.com/p/compcache/).
     - Add partman/early_command hook to run arbitrary commands immediately
       before partitioning (LP: #239348).
     - Exit straight away if a called script is killed by a signal.
     - Only mark the partition table as changed due to CHANGE_FILE_SYSTEM if
       it actually makes a change (i.e. the partition wasn't already using
       that filesystem or didn't have that flag set). This avoids the
       partition table being rewritten even if partman did nothing more than
       autousing swap (LP: #287660).
     - Add partman/default_filesystem template so that we can remove
       hardcoding of ext3 from elsewhere in partman, and make the default
       filesystem preseedable.
     - Check dmraid's exit code rather than parsing its output.
     - Don't display the Back button when asking for confirmation, since it's
       already a boolean "do you want to continue?" question and we ignore
       backup anyway (LP: #9244).
     - Cope with exception options, partition flags passed to SET_FLAGS, and
       the partition name passed to SET_NAME being empty (closes: #268495).
     - Use 'update-dev --settle' rather than 'update-dev' during commit.
       Requires di-utils 1.66.
   * Run 'depmod -a' after loading extra partman components, since they might
     install further kernel modules as dependencies.
   * Mark partman/exception_handler and partman/exception_handler_note unseen
     before asking them; they're effectively error messages but implemented
     using select and boolean templates, so won't necessarily be reshown
     otherwise, and failures may be very confusing if these aren't shown.
   [ Frans Pop ]
   * Remove myself as uploader.
   [ Updated translations ]
   * Esperanto (eo.po) by Felipe Castro
   * Basque (eu.po) by Piarres Beobide
   * Galician (gl.po) by marce villarino
   * Hindi (hi.po) by Kumar Appaiah
   * Italian (it.po) by Milo Casagrande
   * Kazakh (kk.po) by daur88
   * Malayalam (ml.po) by Praveen Arimbrathodiyil
   * Marathi (mr.po) by Sampada
   * Tagalog (tl.po) by Eric Pareja
 1636ffd154fa8de97d007b7928b02816050dc426 1011 partman-base_129.dsc
 ecb6adb2d3fa58983eed1d97641d483780c57d2a 165401 partman-base_129.tar.gz
 7cefb54f936f883df11fc2355af6d7342591764b 132380 partman-base_129_i386.udeb
 2d8dbf2f62099cdc72a4514a60fed635789bdeea 3452 partman-utils_129_i386.udeb
 c438e054c3efbd7e29d99b70ef9d4ba80ace7e0a02cc9c84428961b8f7efcb04 1011 partman-base_129.dsc
 99b162162ce746ecad4fdd1164ad3a206214fc0db34aab37f0fc13a0f0ff708f 165401 partman-base_129.tar.gz
 140eecc5880cf422ad679f6288246362220c6eb56415f0fbd996a1bc58d92828 132380 partman-base_129_i386.udeb
 5c8db0f0d75896a2c880572654937fc04eb2786bd4033664ba5bb2e028d1ec4d 3452 partman-utils_129_i386.udeb
 c545b530e3f7d48f53c7ecb995fd9e83 1011 debian-installer standard partman-base_129.dsc
 90f15af12cdbfdc59df0f68a5a2422a6 165401 debian-installer standard partman-base_129.tar.gz
 0865ad3a4792a080532d1319ccb376dc 132380 debian-installer standard partman-base_129_i386.udeb
 3c74e1987c5ba46b6849d89e8193b55b 3452 debian-installer extra partman-utils_129_i386.udeb
Package-Type: udeb

Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Colin Watson <cjwatson@debian.org> -- Debian developer


--- End Message ---

Reply to: