Bug#515614: Installation of Lenny broken - Buffer I/O error on device sr0
Package: installation-reports
severity: important
Boot method: CD
Image version: Lenny businesscard 5.0.0
Date: 2009-02-15
Machine: Desktop PC 64Bit
Processor: Athlon64 X2 3800+
Memory: 1024MB
Partitions: -
Output of lspci -nn (list was done with etch):
> 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller
> [10de:0369] (rev a1) 00:01.0 ISA bridge [0601]: nVidia Corporation
> MCP55 LPC Bridge [10de:0363] (rev a2) 00:01.1 SMBus [0c05]: nVidia
> Corporation MCP55 SMBus [10de:0368] (rev a2) 00:01.2 RAM memory
> [0500]: nVidia Corporation MCP55 Memory Controller [10de:036a] (rev
> a2) 00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB
> Controller [10de:036c] (rev a1) 00:02.1 USB Controller [0c03]: nVidia
> Corporation MCP55 USB Controller [10de:036d] (rev a2) 00:05.0 IDE
> interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f]
> (rev a2) 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA
> Controller [10de:037f] (rev a2) 00:06.0 PCI bridge [0604]: nVidia
> Corporation MCP55 PCI bridge [10de:0370] (rev a2) 00:06.1 Audio device
> [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371]
> (rev a2) 00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet
> [10de:0373] (rev a2) 00:0b.0 PCI bridge [0604]: nVidia Corporation
> MCP55 PCI Express bridge [10de:0374] (rev a2) 00:0c.0 PCI bridge
> [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev
> a2) 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express
> bridge [10de:0378] (rev a2) 00:0e.0 PCI bridge [0604]: nVidia
> Corporation MCP55 PCI Express bridge [10de:0375] (rev a2) 00:0f.0 PCI
> bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377]
> (rev a2) 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Address Map [1022:1101] 00:18.2 Host bridge [0600]:
> Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
> [1022:1102] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD]
> K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] 06:00.0 VGA
> compatible controller [0300]: nVidia Corporation G70 [GeForce 7600 GS]
> [10de:0392] (rev a1)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [E]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
During loading of kernel, the following was shown:
> |Buffer I/O error on device sr0, logical block 43910 end_request: I/O
> error, dev sr0, sector 175640|
It is ensured, that hardware and CD is ok.
The CD can be read in etch without failures.
Reply to: