[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#510271: marked as done (domain preseeding takes precedence over DHCP info)

Your message dated Tue, 06 Jan 2009 17:32:06 +0000
with message-id <E1LKFmg-0005Je-FE@ries.debian.org>
and subject line Bug#510271: fixed in oldsys-preseed 3.1
has caused the Debian Bug report #510271,
regarding domain preseeding takes precedence over DHCP info
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
510271: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=510271
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports
Version: 2.38
Severity: normal


Sorry about the aborted attempt earlier -- please close that one.
Here's a second attempt...

I originally wanted to try installing Lenny on an 8GB thumb drive.
But it failed repeatedly during the "installing basic software"
phase with the thumb drive going "read only".  I suspected that
the thumb drive was being driven harder than it's design spec
and over heating on me.  I'll try again some other day with
a different type of thumb drive.

Another thing I could try is use "ext2" instaead of "ext3"
filesystems on the thumb drive, and using "noatime" or
"relatime" options.  Journaling on a flash-based media
is reported to be a bad idea due to the increased
number of media writes per user I/O operation.

But that's a project for another day...

In order to get it working, I installed to an 80GB
USB hard drive.  That installation was entirely
nominal, with no surprises.

One thing worth mentioning though: I have a full-service
DHCP on this subnet, so it got the network parameters from
DHCP.  This was successful, but for some reason it decided
that the DNS domain was "example.org", not the one being
offered by DHCP. The text "example.org" showed up in
the following places:
	/etc/network/interfaces
	/etc/hosts
it may also have shown up in the exim4 configuration
file, but after changing it in the two above places,
I did "dpkg-reconfigure exim4-config" and that was fixed.

Let me know if you would like to look at the log files
or if there is any other way I can help.


-- Package-specific info:

Boot method: following instructions from http://www.cyrius.com/debian/nslu2/
Image version: http://www.slug-firmware.net/d-click.php?p=download%2Fdebian%2Fnslu2&f=debian-armel-5.0rc1.zip&l=d-license.txt&k=800164d2fb07ee586bb586c7d0851358 MD5=3a46b5f46ee0f1b5c87a140c2e82d2c8 Released on 2008-11-12
Date: Dec Dec 28 18:17

Machine: bog standard NSLU2 - no mods
Partitions:
rbthomas@slug:~$ df -Tl
  Filesystem    Type   1K-blocks      Used Available Use% Mounted on
  /dev/sda1     ext3     6728280    713680   5672820  12% /
  tmpfs        tmpfs       14756         0     14756   0% /lib/init/rw
  udev         tmpfs       10240        36     10204   1% /dev
  tmpfs        tmpfs       14756         0     14756   0% /dev/shm
  /dev/sda6     ext3    69228152    883300  64828228   2% /home



Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [?]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O] (but see above re: thumb drive)
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O] with some fixups required post install

Comments/Problems:

<Description of the install, in prose, and any thoughts, comments
      and ideas you had during the initial install.>

See above

-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.



Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="5.0 (lenny) - installer build 20081029"
X_INSTALLATION_MEDIUM=netboot

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux slug 2.6.26-1-ixp4xx #1 Fri Oct 10 02:29:27 UTC 2008 armv5tel unknown
lspci -knn: 00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
lspci -knn: 	Kernel driver in use: ohci_hcd
lspci -knn: 00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
lspci -knn: 	Kernel driver in use: ohci_hcd
lspci -knn: 00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
lspci -knn: 	Kernel driver in use: ehci_hcd
lsmod: Module                  Size  Used by
lsmod: jfs                   166636  0 
lsmod: reiserfs              245524  0 
lsmod: ext3                  123304  2 
lsmod: jbd                    45396  1 ext3
lsmod: vfat                    9952  0 
lsmod: fat                    48156  1 vfat
lsmod: nls_base                7168  3 jfs,vfat,fat
lsmod: ext2                   63496  0 
lsmod: mbcache                 7872  2 ext3,ext2
lsmod: sd_mod                 22736  4 
lsmod: usb_storage            82375  3 
lsmod: scsi_mod              111076  2 sd_mod,usb_storage
lsmod: ohci_hcd               18212  0 
lsmod: ehci_hcd               35148  0 
lsmod: evdev                   8608  0 
lsmod: ixp4xx_eth             12216  0 
lsmod: ixp4xx_npe              7936  2 ixp4xx_eth
lsmod: firmware_class          7552  1 ixp4xx_npe
lsmod: ixp4xx_qmgr             5336  6 ixp4xx_eth
lsmod: ixp4xx_beeper           2720  0 
lsmod: usbcore               128252  4 usb_storage,ohci_hcd,ehci_hcd
df: Filesystem           1k-blocks      Used Available Use% Mounted on
df: tmpfs                    14768        32     14736   0% /dev
df: /dev/sda1              6728280    620632   5765868  10% /target
df: /dev/sda6             69228152    317064  65394464   0% /target/home
df: /dev/sda1              6728280    620632   5765868  10% /dev/.static/dev
df: tmpfs                    14768        32     14736   0% /target/dev
free:               total         used         free       shared      buffers
free:   Mem:        29540        26632         2908            0          836
free:  Swap:       979924         4228       975696
free: Total:      1009464        30860       978604
/proc/cmdline: console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug
/proc/cpuinfo: Processor	: XScale-IXP42x Family rev 1 (v5l)
/proc/cpuinfo: BogoMIPS	: 132.71
/proc/cpuinfo: Features	: swp half thumb fastmult edsp 
/proc/cpuinfo: CPU implementer	: 0x69
/proc/cpuinfo: CPU architecture: 5TE
/proc/cpuinfo: CPU variant	: 0x0
/proc/cpuinfo: CPU part	: 0x41f
/proc/cpuinfo: CPU revision	: 1
/proc/cpuinfo: Cache type	: undefined 5
/proc/cpuinfo: Cache clean	: undefined 5
/proc/cpuinfo: Cache lockdown	: undefined 5
/proc/cpuinfo: Cache format	: Harvard
/proc/cpuinfo: I size		: 32768
/proc/cpuinfo: I assoc		: 32
/proc/cpuinfo: I line length	: 32
/proc/cpuinfo: I sets		: 32
/proc/cpuinfo: D size		: 32768
/proc/cpuinfo: D assoc		: 32
/proc/cpuinfo: D line length	: 32
/proc/cpuinfo: D sets		: 32
/proc/cpuinfo: 
/proc/cpuinfo: Hardware	: Linksys NSLU2
/proc/cpuinfo: Revision	: 0000
/proc/cpuinfo: Serial		: 0000000000000000
/proc/ioports: 00000000-0000ffff : PCI I/O Space
/proc/iomem: 00000000-01ffffff : System RAM
/proc/iomem:   00025000-002b0fff : Kernel text
/proc/iomem:   002b2000-002fa793 : Kernel data
/proc/iomem: 48000000-4bffffff : PCI Memory Space
/proc/iomem:   48000000-48000fff : 0000:00:01.0
/proc/iomem:     48000000-48000fff : ohci_hcd
/proc/iomem:   48001000-48001fff : 0000:00:01.1
/proc/iomem:     48001000-48001fff : ohci_hcd
/proc/iomem:   48002000-480020ff : 0000:00:01.2
/proc/iomem:     48002000-480020ff : ehci_hcd
/proc/iomem: 50000000-50ffffff : IXP4XX-Flash.0
/proc/iomem:   50000000-50ffffff : IXP4XXFlash
/proc/iomem: 60000000-60003fff : IXP4xx Queue Manager
/proc/iomem: c8000000-c8000fff : serial8250.0
/proc/iomem:   c8000000-c800001f : serial
/proc/iomem: c8001000-c8001fff : serial8250.0
/proc/iomem:   c8001000-c800101f : serial
/proc/iomem: c8007000-c8007fff : NPE-B
/proc/iomem: c8008000-c8008fff : NPE-C
/proc/iomem: c8009000-c8009fff : eth0
/proc/iomem: c800b000-c800bfff : pxa2xx-udc
/proc/interrupts:            CPU0
/proc/interrupts:   3:     165466      IXP4xx  IXP4xx Queue Manager
/proc/interrupts:   5:     748675      IXP4xx  timer1
/proc/interrupts:  11:       1311      IXP4xx  ixp4xx-beeper
/proc/interrupts:  15:       1054      IXP4xx  serial
/proc/interrupts:  22:          0      IXP4xx  NSLU2 power button
/proc/interrupts:  26:    2929410      IXP4xx  ehci_hcd:usb1
/proc/interrupts:  27:          0      IXP4xx  ohci_hcd:usb3
/proc/interrupts:  28:          0      IXP4xx  ohci_hcd:usb2
/proc/interrupts:  29:          0      IXP4xx  NSLU2 reset button
/proc/interrupts: Err:          0
/proc/meminfo: MemTotal:        29540 kB
/proc/meminfo: MemFree:          2900 kB
/proc/meminfo: Buffers:           836 kB
/proc/meminfo: Cached:          16708 kB
/proc/meminfo: SwapCached:       1888 kB
/proc/meminfo: Active:          10832 kB
/proc/meminfo: Inactive:         9128 kB
/proc/meminfo: SwapTotal:      979924 kB
/proc/meminfo: SwapFree:       975696 kB
/proc/meminfo: Dirty:             256 kB
/proc/meminfo: Writeback:           0 kB
/proc/meminfo: AnonPages:        2248 kB
/proc/meminfo: Mapped:           1528 kB
/proc/meminfo: Slab:             3280 kB
/proc/meminfo: SReclaimable:     1460 kB
/proc/meminfo: SUnreclaim:       1820 kB
/proc/meminfo: PageTables:        292 kB
/proc/meminfo: NFS_Unstable:        0 kB
/proc/meminfo: Bounce:              0 kB
/proc/meminfo: WritebackTmp:        0 kB
/proc/meminfo: CommitLimit:    994692 kB
/proc/meminfo: Committed_AS:     9372 kB
/proc/meminfo: VmallocTotal:   991232 kB
/proc/meminfo: VmallocUsed:     17504 kB
/proc/meminfo: VmallocChunk:   966652 kB
/proc/bus/input/devices: I: Bus=0019 Vendor=001f Product=0001 Version=0100
/proc/bus/input/devices: N: Name="ixp4xx beeper"
/proc/bus/input/devices: P: Phys=ixp4xx/gpio
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd event0 
/proc/bus/input/devices: B: EV=40001
/proc/bus/input/devices: B: SND=6
/proc/bus/input/devices: 

-- System Information:
Debian Release: 5.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: armel (armv5tel)

Kernel: Linux 2.6.26-1-ixp4xx
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

installation-report depends on no packages.

Versions of packages installation-report recommends:
ii  pciutils                      1:3.0.0-6  Linux PCI Utilities
ii  reportbug                     3.48       reports bugs in the Debian distrib

installation-report suggests no packages.

-- no debconf information

Attachment: install.logs.gz
Description: GNU Zip compressed data


--- End Message ---
--- Begin Message --- 
Source: oldsys-preseed
Source-Version: 3.1

We believe that the bug you reported is fixed in the latest version of
oldsys-preseed, which is due to be installed in the Debian FTP archive:

oldsys-preseed_3.1.dsc
  to pool/main/o/oldsys-preseed/oldsys-preseed_3.1.dsc
oldsys-preseed_3.1.tar.gz
  to pool/main/o/oldsys-preseed/oldsys-preseed_3.1.tar.gz
oldsys-preseed_3.1_arm.udeb
  to pool/main/o/oldsys-preseed/oldsys-preseed_3.1_arm.udeb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 510271@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Martin Michlmayr <tbm@cyrius.com> (supplier of updated oldsys-preseed package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Tue, 06 Jan 2009 18:21:27 +0100
Source: oldsys-preseed
Binary: oldsys-preseed
Architecture: source arm
Version: 3.1
Distribution: unstable
Urgency: low
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Martin Michlmayr <tbm@cyrius.com>
Description: 
 oldsys-preseed - Preseed debian-installer from an existing device (udeb)
Closes: 510271
Changes: 
 oldsys-preseed (3.1) unstable; urgency=low
 .
   * Don't preseed the hostname and domain name with default values
     because the information from DHCP no longer takes precedence.
     Instead, mark the questions as seen to let netcfg choose default
     values in case the information is not supplied by DHCP.  Closes:
     #510271.
Checksums-Sha1: 
 6e22f43427d1b349f74d7fee0c246153a39b2959 866 oldsys-preseed_3.1.dsc
 c76c04e9b229804f1eb19ae61202b4fc9921d17a 295851 oldsys-preseed_3.1.tar.gz
 18cfdcdb45944af6d737c76850a7a88c1f24c376 5498 oldsys-preseed_3.1_arm.udeb
Checksums-Sha256: 
 d4ba14734d26b5fc8a4c992725488ac9307c11631e9298b190b44a77120088c8 866 oldsys-preseed_3.1.dsc
 d934d0f22436b85bdc33a0174d0d7141969fcce5d3678525e26ffeaa115bc6ce 295851 oldsys-preseed_3.1.tar.gz
 4c7ab8b9a89ceb81f6252077518262e4ec3675e8ee2ce863baae5565ce18933f 5498 oldsys-preseed_3.1_arm.udeb
Files: 
 f96550575a607582abf912fbcba4571a 866 debian-installer optional oldsys-preseed_3.1.dsc
 eb32b2d81333f4bcd85c26ae851758af 295851 debian-installer optional oldsys-preseed_3.1.tar.gz
 70c7a6c15ad02343d7fa2815d6f9bf8d 5498 debian-installer optional oldsys-preseed_3.1_arm.udeb
Package-Type: udeb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEARECAAYFAkljlIYACgkQKb5dImj9VJ+YzwCdE+IgHzg8qS+lzAQaKGcCoDYc
NH0An0CoZhgZT6yUguZnJOrwVuT/Er7s
=IQjp
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: