[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#460659: Installation report on HP Compaq 6720s



Package: installation-reports
Version: 2.31
Severity: normal

Boot method: CD
Image version: http://mirror.home-dn.net/d-i/2.6.23/etch-custom-1013.iso - it
contains the experimental e1000 driver for using the netinstall
Date: <somewhere in late December 2007>

Machine: HP Compaq 6720s
Partitions:
# df -Tl
Filesystem    Typeblocchi di   1K   Usati Disponib. Uso% Montato su
/dev/sda1 reiserfs     6835368   3759288   3076080  55% /
udev         tmpfs       10240       116     10124   2% /dev
/dev/sda1 reiserfs     6835368   3759288   3076080  55% /dev/.static/dev
none         tmpfs      774088         0    774088   0% /dev/shm
/dev/sda6 reiserfs    70330328  22769204  47561124  33% /home
# fdisk -l /dev/sda

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc7c87c0a

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1         851     6835626   83  Linux
/dev/sda2             852        9729    71312535    5  Extended
/dev/sda5             852         973      979902   82  Linux swap / Solaris
/dev/sda6             974        9729    70332538+  83  Linux
#


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [E]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:

I've used a etch netinstall CD. Network at first didn't work, so I've tried an
unofficial image which included the experimental e1000 driver, needed for the
Ethernet card to work. Once booted with that image, installation went like a
charm! :) 

The only thing to note is: unfortunately I couldn't get my wireless card
[1] to work with opensource drivers (bcm43xx), but only with ndiswrapper + .inf.

[1] 10:00.0 0280: 14e4:4312 (rev 02), seen as "Network controller: Broadcom
Corporation BCM4310 UART (rev 02)")

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20071013-01:44)"
X_INSTALLATION_MEDIUM=cdrom

==============================================
Installer hardware-summary:
==============================================
Please see attached file.


Kindly,
David

-- 
 . ''`.  Debian maintainer | http://wiki.debian.org/DavidPaleino
 : :'  : Linuxer #334216 --|-- http://www.hanskalabs.net/
 `. `'`  GPG: 1392B174 ----|---- http://snipr.com/qa_page
   `-   2BAB C625 4E66 E7B8 450A C3E1 E6AA 9017 1392 B174

Attachment: hardware-summary.gz
Description: GNU Zip compressed data

Attachment: signature.asc
Description: PGP signature


Reply to: