[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#509857: installation-report for d-i rc1 on silicon graphics O2



Package: installation-reports

Boot method: network via tftp
Image version: http://cdimage.debian.org/cdimage/lenny_di_rc1/mips/jigdo-dvd/debian-testing-mips-DVD-1.jigdo
Date: 27 December 2008

Machine: Silicon Graphics O2
Processor: R5000@200Mhz
Memory: 384Mb
Partitions:

Output of lspci -knn (or lspci -nn):

~ # lspci -knn
00:01.0 SCSI storage controller [0100]: Adaptec AIC-7880U [9004:8078]
        Kernel driver in use: aic7xxx
00:02.0 SCSI storage controller [0100]: Adaptec AIC-7880U [9004:8078]
        Kernel driver in use: aic7xxx
00:03.0 PCI bridge [0604]: NetMos Technology Device [9710:9250] (rev 01)
01:08.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
01:08.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
01:08.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
01:09.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (rev 61)
01:0a.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [ ]
Load installer modules: [E]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [ ]

Comments/Problems:

Booted via serial console with command:
  bootp(): append="console=ttyS0,38400 BOOT_DEBUG=1"

I had the machine connected to a LAN hosting apache serving all required
files from DVD debian-testing-mips-DVD-1. When setting up the local
mirror and trying to go further I got this error:

  lqqqqqqqqqqqqqqqqqu [!!] Download installer components tqqqqqqqqqqqqqqqqqqk   
  x                                                                         x   
  x The installer failed to download a file from the mirror. This may be    x   
  x a problem with your network, or with the mirror. You can choose to      x   
  x retry the download, select a different mirror, or cancel and choose     x   
  x another installation method.                                            x   
  x                                                                         x   
  x Downloading a file failed:                                              x   
  x                                                                         x   
  x                            Retry                                        x   
  x                            Change mirror                                x   
  x                            Cancel                                       x   
  x                                                                         x   
  x                                                                         x   
  x                                                                         x   
  mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj

because the dvd image is missing the "Release.gpg" file. I checked that
at least "Release" file is available. I really don't know how to
continue the installation.

I downloaded the new testing image (dated 20081215) but i found the same
problem: "dists/lenny/Release.gpg" is still missing.

Any hint?

Thanks,
Giuseppe




Reply to: