Bug#495216: installation-reports: sparc64 V480 lenny: installer/kernel hangs after "exec busybox init"
On Tue, Sep 16, 2008 at 04:49:34PM +0200, Jrmy Bobbio wrote:
> Could you try again with one of the daily built images? Sparc kernels
> for d-i have been updated and should boot properly now.
Nope, Sun Fire 480R seems to hang hard in or after
the cassini gigabit network driver now. Note, that this machines have
two internal cassini network ports and it seems to hang while
initializing the second one.
Console output is attached. I noticed the cassini drivers seems to have
changed the mac address of the machine ?!
Needed to put another mac now in the dhcpserver.
Any further suggestions how to proceed with debugging are very welcome.
Anyway, many thanks for noticing me.
Hermann
-------------------------------------------------------------
Rebooting with command: boot net:dhcp -p suite=etch BOOT_DEBUG=3 console=/dev/ttyS0,9600
Boot device: /pci@9,700000/network@2:dhcp File and args: -p suite=etch BOOT_DEBUG=3 console=/dev/ttyS0,9600
/pci@9,700000/network@2: 1000 Mbps full duplex link up
Timed out waiting for BOOTP/DHCP reply
Timed out waiting for BOOTP/DHCP reply
Timed out waiting for BOOTP/DHCP reply
Timed out waiting for BOOTP/DHCP reply
Timed out waiting for BOOTP/DHCP reply
Timed out waiting for BOOTP/DHCP reply
|
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.22.34 2007/07/23 13:01'
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-sparc64 (Debian 2.6.26-5) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 Thu Sep 11 00:15:29 UTC 2008
[ 0.000000] console [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 00:03:ba:29:7c:9f
[ 0.000000] Kernel: Using 1 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /pci@9,700000/ebus@1/serial@1,400000:a
[ 0.000000] PROM: Built device tree with 101792 bytes of memory.
[ 0.000000] Top of RAM: 0xa1ffb22000, Total RAM: 0x1ffad6000
[ 0.000000] Memory hole size: 655360MB
[ 0.000000] [0000000318000000-fffff8a000800000] page_structs=131072 node=0 entry=1120/0
[ 0.000000] [0000000318000000-fffff8a000c00000] page_structs=131072 node=0 entry=1121/0
[ 0.000000] [0000000318700000-fffff8a001000000] page_structs=131072 node=0 entry=1122/0
[ 0.000000] [0000000318700000-fffff8a001400000] page_structs=131072 node=0 entry=1123/0
[ 0.000000] [0000000318e00000-fffff8a001800000] page_structs=131072 node=0 entry=1124/0
[ 0.000000] [0000000318e00000-fffff8a001c00000] page_structs=131072 node=0 entry=1125/0
[ 0.000000] [0000000319500000-fffff8a002000000] page_structs=131072 node=0 entry=1126/0
[ 0.000000] [0000000319c00000-fffff8a002400000] page_structs=131072 node=0 entry=1127/0
[ 0.000000] [0000000319c00000-fffff8a002800000] page_structs=131072 node=0 entry=1128/0
[ 0.000000] [000000031a300000-fffff8a002c00000] page_structs=131072 node=0 entry=1129/0
[ 0.000000] [000000031a300000-fffff8a003000000] page_structs=131072 node=0 entry=1130/0
[ 0.000000] [000000031aa00000-fffff8a003400000] page_structs=131072 node=0 entry=1131/0
[ 0.000000] [000000031aa00000-fffff8a003800000] page_structs=131072 node=0 entry=1132/0
[ 0.000000] [000000031b100000-fffff8a003c00000] page_structs=131072 node=0 entry=1133/0
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 83886080 -> 84934033
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 83886080 -> 84932607
[ 0.000000] 0: 84932608 -> 84933932
[ 0.000000] 0: 84933968 -> 84934031
[ 0.000000] 0: 84934032 -> 84934033
[ 0.000000] Booting Linux...
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040751
[ 0.000000] Kernel command line: -p suite=etch BOOT_DEBUG=3 console=/dev/ttyS0,9600
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] clocksource: mult[640000] shift[16]
[ 0.000000] clockevent: mult[28f5c28] shift[32]
[ 288.752419] Console: colour dummy device 80x25
[ 288.813649] Dentry cache hash table entries: 1048576 (order: 10, 8388608 bytes)
[ 288.918524] Inode-cache hash table entries: 524288 (order: 9, 4194304 bytes)
[ 299.710205] Console: switching to mono PROM 80x34 [ 304.000240] [drm] Initialized drm 1.1.0 20060810
[ 304.056011] f00bf958: ttyS0 at MMIO 0x7fc7e400000 (irq = 21) is a SAB82532 V3.2
[ 304.255778] f00bf958: ttyS1 at MMIO 0x7fc7e400040 (irq = 21) is a SAB82532 V3.2lyprom0] -> real [ttyS0]
[ 304.346767] brd: module loaded
[ 304.384062] loop: module loaded
[ 304.420681] Uniform Multi-Platform E-IDE driver
[ 304.474812] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 304.571536] mice: PS/2 mouse device common for all mice
[ 304.633816] usbcore: registered new interface driver usbhid
[ 304.699911] usbhid: v2.6:USB HID core driver
[ 304.751976] TCP cubic registered
[ 304.789622] NET: Registered protocol family 17
[ 304.843076] registered taskstats version 1
%G�%@+ debugshell just bootedc/hctosys.c: unable to open rtc device (rtc0)
+ [ 3 -gt 2 ]
+ echo This is a debug shell (just booted).
This is a debug shell (just booted).
+ sh
BusyBox v1.10.2 (Debian 1:1.10.2-2) built-in shell (ash)
Enter 'help' for a list of built-in commands.
sh: can't access tty; job control turned off ~ # exit + mount /proc + mount /sys
+ /lib/debian-installer/start-udev
[ 312.702088] ohci_hcd 0002:00:01.3: OHCI Host Controller
[ 312.763960] ohci_hcd 0002:00:01.3: new USB bus registered, assigned bus number 1
[ 312.852279] ohci_hcd 0002:00:01.3: irq 22, io mem 0x7fc01000000
[ 312.935873] cassini.c:v1.6 (21 May 2008)
[ 312.985004] cassini: MAC address not found in ROM VPD
[ 313.045617] eth0: Sun Cassini+ (64bit/66MHz PCI/Cu) Ethernet[29] 08:00:20:98:12:42
[ 313.151093] usb usb1: configuration #1 chosen from 1 choice
[ 313.216913] hub 1-0:1.0: USB hub found
[ 313.261648] hub 1-0:1.0: 4 ports detected
[ 313.412685] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 313.492989] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 313.579463] usb usb1: Product: OHCI Host Controller
[ 313.637779] usb usb1: Manufacturer: Linux 2.6.26-1-sparc64 ohci_hcd
[ 313.712783] usb usb1: SerialNumber: 0002:00:01.3
[ 313.772152] cassini: MAC address not found in ROM VPD
[ 313.832843] eth1: Sun Cassini+ (64bit/33MHz PCI/Cu) Ethernet[23] 08:00:20:bc:1d:1c
--
Netzwerkadministration/Zentrale Dienste, Interdiziplinaeres
Zentrum fuer wissenschaftliches Rechnen der Universitaet Heidelberg
IWR; INF 368; 69120 Heidelberg; Tel: (06221)54-8236 Fax: -5224
Email: Hermann.Lauer@iwr.uni-heidelberg.de
Reply to: