Bug#481433: Installation report: minor partitioning display bug, otherwise fine (Daily i386 netboot build, 13-May-2008)
Package: installation-reports
Boot method: Network boot (PXE)
Image version: http://people.debian.org/~joeyh/d-i/images/daily/netboot/netboot.tar.gz
(Daily i386 netboot build, 13-May-2008)
Date: 2008-05-13 7:30 PM US/Eastern time
Machine: Generic w/ Intel SE7500CW2 motherboard
Processor: Intel 2.00 GHz Xeon (Prestonia)
Memory: 1024 MB
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda1 ext3 7692876 685724 6616376 10% /
tmpfs tmpfs 517872 0 517872 0% /lib/init/rw
udev tmpfs 10240 76 10164 1% /dev
tmpfs tmpfs 517872 0 517872 0% /dev/shm
Output of lspci -nn and lspci -vnn:
lspci -nn:
00:00.0 Host bridge [0600]: Intel Corporation E7500 Memory Controller
Hub [8086:2540] (rev 03)
00:00.1 Class [ff00]: Intel Corporation E7500/E7501 Host RASUM
Controller [8086:2541] (rev 03)
00:02.0 PCI bridge [0604]: Intel Corporation E7500/E7501 Hub Interface
B PCI-to-PCI Bridge [8086:2543] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
Controller #1 [8086:2482] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
Controller #2 [8086:2484] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 42)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801CA LPC Interface
Controller [8086:2480] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801CA Ultra ATA
Storage Controller [8086:248b] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801CA/CAM SMBus Controller
[8086:2483] (rev 02)
01:1c.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC
[8086:1461] (rev 03)
01:1d.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI
Bridge [8086:1460] (rev 03)
01:1e.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC
[8086:1461] (rev 03)
01:1f.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI
Bridge [8086:1460] (rev 03)
04:03.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
[1002:4752] (rev 27)
04:04.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1
Ethernet Pro 100 [8086:1229] (rev 0d)
04:05.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1
Ethernet Pro 100 [8086:1229] (rev 0d)
lspci -vnn:
00:00.0 Host bridge [0600]: Intel Corporation E7500 Memory Controller
Hub [8086:2540] (rev 03)
Flags: bus master, fast devsel, latency 0
Kernel driver in use: e7xxx_edac
Kernel modules: e7xxx_edac
00:00.1 Class [ff00]: Intel Corporation E7500/E7501 Host RASUM
Controller [8086:2541] (rev 03)
Subsystem: Intel Corporation Device [8086:3419]
Flags: fast devsel
00:02.0 PCI bridge [0604]: Intel Corporation E7500/E7501 Hub Interface
B PCI-to-PCI Bridge [8086:2543] (rev 03)
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=03, sec-latency=0
Memory behind bridge: fc100000-fc1fffff
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
Controller #1 [8086:2482] (rev 02)
Subsystem: Intel Corporation Device [8086:3419]
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 7000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
Controller #2 [8086:2484] (rev 02)
Subsystem: Intel Corporation Device [8086:3419]
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 7020 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 42)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fc200000-fdffffff
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801CA LPC Interface
Controller [8086:2480] (rev 02)
Flags: bus master, medium devsel, latency 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801CA Ultra ATA
Storage Controller [8086:248b] (rev 02) (prog-if 8a [Master SecP
PriP])
Subsystem: Intel Corporation Device [8086:3419]
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 7040 [size=16]
Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801CA/CAM SMBus Controller
[8086:2483] (rev 02)
Subsystem: Intel Corporation Device [8086:3419]
Flags: medium devsel, IRQ 21
I/O ports at 7060 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:1c.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC
[8086:1461] (rev 03) (prog-if 20)
Subsystem: Intel Corporation Device [8086:3419]
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at fc100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] PCI-X non-bridge device
01:1d.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI
Bridge [8086:1460] (rev 03)
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
Capabilities: [50] PCI-X bridge device
Kernel modules: shpchp
01:1e.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC
[8086:1461] (rev 03) (prog-if 20)
Subsystem: Intel Corporation Device [8086:3419]
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at fc101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] PCI-X non-bridge device
01:1f.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI
Bridge [8086:1460] (rev 03)
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=01, secondary=03, subordinate=03, sec-latency=64
Capabilities: [50] PCI-X bridge device
Kernel modules: shpchp
04:03.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
[1002:4752] (rev 27)
Subsystem: Intel Corporation Device [8086:3419]
Flags: bus master, stepping, medium devsel, latency 66, IRQ 11
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at 8000 [size=256]
Memory at fc240000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fc260000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
04:04.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1
Ethernet Pro 100 [8086:1229] (rev 0d)
Subsystem: Intel Corporation Device [8086:3419]
Flags: bus master, medium devsel, latency 66, IRQ 18
Memory at fc241000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 8400 [size=64]
Memory at fc200000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [dc] Power Management version 2
Kernel driver in use: e100
Kernel modules: e100, eepro100
04:05.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1
Ethernet Pro 100 [8086:1229] (rev 0d)
Subsystem: Intel Corporation Device [8086:3419]
Flags: bus master, medium devsel, latency 66, IRQ 19
Memory at fc242000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 8440 [size=64]
Memory at fc220000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [dc] Power Management version 2
Kernel driver in use: e100
Kernel modules: e100, eepro100
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
The hard drives in the system are two Segate ST360015As, but they are
connected through an Arco DupliDisk II.
When partitioning, I set everything up and the screen looked like this
(no problems):
IDE1 master (hda) - 60.0 GB ST360015A
#1 primary 8.0 GB B f ext3 /
#2 primary 510.0 MB f swap swap
pri/log 51.5 GB FREE SPACE
However, when I continued on and the screen came up afterwards to
confirm it looked like the following:
The partition tables of the following devices are changed:
IDE1 master (hda)
The following partitions are going to be formatted:
partition #1 of IDE1 master (hda) as ext3
partition #1 of IDE1 master (hda) as swap
It has both of the partitions listed as #1, when obviously that isn't
right. Even the previous initial setup screen had them listed as #1
and #2. This is only a minor display issue; my install was completely
successful.
Thanks for your time,
Johnathan Mayo
Reply to: