--- Begin Message ---
Subject: installation-report: Installation in finnish, almost OK
Package: installation-reports
Version: 2.17
Severity: normal
*** Please type your report below this line ***
Some glitch during installgui, error message flashed too fast to read.
Someting about not being able to pan. Looked like after that some text
were in english and not finnish anymore.
Keyboard was not finnish in Gnome Desktop, had to change to PC 105 and
Finnish layout. Character set was UTF-8 only, added ISO-Latin-9 to get
interoperability with older systems.
Finnish keyboard OK in console.
I took screenshots during install, but can not view them, not eog and
not gthumb can show them.
Installer offered only american and british wordlists, wfinnish and
ifinnish should be there (altough proofreading finnish works badly
until http://www.lemi.fi/voikko/ is in Debian).
Very nifty install. Especially the finnish translation was top quality.
-- Package-specific info:
Boot method: CD
Image version: Etch beta 3 netinst
Date: <Date and time of the install>
Machine: Fujitsu Scenic X 500MHz PIII 256M 8G
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [ ]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060806)"
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux jenkka 2.6.16-2-486 #1 Sat Jul 15 21:23:01 UTC 2006 i686 unknown
lspci -v -t: -[0000:00]-+-00.0 Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
lspci -v -t: +-01.0-[0000:01]----00.0 ATI Technologies Inc Rage XL AGP 2X
lspci -v -t: +-07.0 Intel Corporation 82371AB/EB/MB PIIX4 ISA
lspci -v -t: +-07.1 Intel Corporation 82371AB/EB/MB PIIX4 IDE
lspci -v -t: +-07.2 Intel Corporation 82371AB/EB/MB PIIX4 USB
lspci -v -t: +-07.3 Intel Corporation 82371AB/EB/MB PIIX4 ACPI
lspci -v -t: +-08.0 Intel Corporation 82557/8/9 [Ethernet Pro 100]
lspci -v -t: \-09.0 Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator]
lspci -n: 00:00.0 0600: 8086:7190 (rev 03)
lspci -n: 00:01.0 0604: 8086:7191 (rev 03)
lspci -n: 00:07.0 0601: 8086:7110 (rev 02)
lspci -n: 00:07.1 0101: 8086:7111 (rev 01)
lspci -n: 00:07.2 0c03: 8086:7112 (rev 01)
lspci -n: 00:07.3 0680: 8086:7113 (rev 02)
lspci -n: 00:08.0 0200: 8086:1229 (rev 08)
lspci -n: 00:09.0 0401: 1013:6003 (rev 01)
lspci -n: 01:00.0 0300: 1002:474d (rev 65)
lspci -v: 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
lspci -v: Flags: bus master, medium devsel, latency 64
lspci -v: Memory at f8000000 (32-bit, prefetchable) [size=64M]
lspci -v: Capabilities: [a0] AGP version 1.0
lspci -v:
lspci -v: 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 128
lspci -v: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
lspci -v: I/O behind bridge: 00002000-00002fff
lspci -v: Memory behind bridge: f4300000-f5ffffff
lspci -v: Prefetchable memory behind bridge: 20000000-200fffff
lspci -v:
lspci -v: 00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v:
lspci -v: 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
lspci -v: Flags: bus master, medium devsel, latency 64
lspci -v: I/O ports at 1060 [size=16]
lspci -v:
lspci -v: 00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 9
lspci -v: I/O ports at 1040 [size=32]
lspci -v:
lspci -v: 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
lspci -v: Flags: medium devsel, IRQ 9
lspci -v:
lspci -v: 00:08.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08)
lspci -v: Subsystem: Fujitsu Limited. Unknown device 1066
lspci -v: Flags: bus master, medium devsel, latency 66, IRQ 11
lspci -v: Memory at f4200000 (32-bit, non-prefetchable) [size=4K]
lspci -v: I/O ports at 1000 [size=64]
lspci -v: Memory at f4000000 (32-bit, non-prefetchable) [size=1M]
lspci -v: Capabilities: [dc] Power Management version 2
lspci -v:
lspci -v: 00:09.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
lspci -v: Subsystem: Fujitsu Limited. Unknown device 108b
lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 9
lspci -v: Memory at f4201000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Memory at f4100000 (32-bit, non-prefetchable) [size=1M]
lspci -v: Capabilities: [40] Power Management version 2
lspci -v:
lspci -v: 01:00.0 VGA compatible controller: ATI Technologies Inc Rage XL AGP 2X (rev 65)
lspci -v: Subsystem: Fujitsu Limited. Unknown device 107c
lspci -v: Flags: bus master, stepping, medium devsel, latency 66
lspci -v: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
lspci -v: I/O ports at 2000 [size=256]
lspci -v: Memory at f4300000 (32-bit, non-prefetchable) [size=4K]
lspci -v: [virtual] Expansion ROM at 20000000 [disabled] [size=128K]
lspci -v: Capabilities: [50] AGP version 1.0
lspci -v: Capabilities: [5c] Power Management version 1
lspci -v:
lspci -x: 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
lspci -x: 00: 86 80 90 71 06 01 10 22 03 00 00 06 00 40 00 00
lspci -x: 10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
lspci -x: 00: 86 80 91 71 1f 00 20 02 03 00 04 06 00 80 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 01 01 40 20 20 a0 22
lspci -x: 20: 30 f4 f0 f5 00 20 00 20 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8c 00
lspci -x:
lspci -x: 00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
lspci -x: 00: 86 80 10 71 0f 00 80 02 02 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
lspci -x: 00: 86 80 11 71 05 00 80 02 01 80 01 01 00 40 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 61 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
lspci -x: 00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 40 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 41 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 04 00 00
lspci -x:
lspci -x: 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
lspci -x: 00: 86 80 13 71 03 00 80 02 02 00 80 06 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:08.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08)
lspci -x: 00: 86 80 29 12 17 00 90 02 08 00 00 02 08 42 00 00
lspci -x: 10: 00 00 20 f4 01 10 00 00 00 00 00 f4 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 cf 10 66 10
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 08 38
lspci -x:
lspci -x: 00:09.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
lspci -x: 00: 13 10 03 60 06 00 10 02 01 00 01 04 00 40 00 00
lspci -x: 10: 00 10 20 f4 00 00 10 f4 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 cf 10 8b 10
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 09 01 04 18
lspci -x:
lspci -x: 01:00.0 VGA compatible controller: ATI Technologies Inc Rage XL AGP 2X (rev 65)
lspci -x: 00: 02 10 4d 47 87 00 90 02 65 00 00 03 08 42 00 00
lspci -x: 10: 00 00 00 f5 01 20 00 00 00 00 30 f4 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 cf 10 7c 10
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00
lspci -x:
lsmod: Module Size Used by
lsmod: sd_mod 16528 0
lsmod: qnx4 10612 0
lsmod: ntfs 189580 0
lsmod: xfs 483476 0
lsmod: exportfs 5248 1 xfs
lsmod: reiserfs 218352 0
lsmod: jfs 158556 0
lsmod: ext3 115976 1
lsmod: jbd 46996 1 ext3
lsmod: vfat 11520 0
lsmod: fat 46876 1 vfat
lsmod: e100 31876 0
lsmod: eepro100 28304 0
lsmod: mii 5248 2 e100,eepro100
lsmod: nls_iso8859_1 4224 0
lsmod: rsrc_nonstatic 12160 0
lsmod: pcmcia_core 37392 1 rsrc_nonstatic
lsmod: isofs 32192 0
lsmod: ide_generic 1408 0 [permanent]
lsmod: aec62xx 6784 0 [permanent]
lsmod: alim15x3 11024 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5392 0 [permanent]
lsmod: cmd64x 10012 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7812 0 [permanent]
lsmod: ns87415 4268 0 [permanent]
lsmod: opti621 4100 0 [permanent]
lsmod: pdc202xx_new 8064 0 [permanent]
lsmod: pdc202xx_old 9600 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 11008 0 [permanent]
lsmod: sis5513 12300 0 [permanent]
lsmod: slc90e66 5120 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 4100 0 [permanent]
lsmod: via82cxxx 8196 0 [permanent]
lsmod: floppy 55852 0
lsmod: usb_storage 69696 0
lsmod: scsi_mod 122444 2 sd_mod,usb_storage
lsmod: vga16fb 11528 0
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28364 0
lsmod: usbkbd 6656 0
lsmod: thermal 13192 0
lsmod: processor 21952 1 thermal
lsmod: fan 4740 0
lsmod: ide_disk 14976 3
lsmod: ide_cd 35488 0
lsmod: cdrom 32176 1 ide_cd
lsmod: generic 4356 0 [permanent]
lsmod: usbhid 32352 0
lsmod: piix 9092 0 [permanent]
lsmod: evdev 8960 6
lsmod: uhci_hcd 27152 0
lsmod: parport_pc 31728 0
lsmod: parport 31944 1 parport_pc
lsmod: psmouse 34568 0
lsmod: ide_core 111280 30 ide_generic,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_disk,ide_cd,generic,piix
lsmod: usbcore 111008 6 usb_storage,usbserial,usbkbd,usbhid,uhci_hcd
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 128428 432 127996 0% /dev
df: tmpfs 128428 432 127996 0% /dev
df: tmpfs 128428 432 127996 0% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part1 7756068 2327428 5034648 32% /target
free: total used free shared buffers
free: Mem: 256860 239432 17428 0 9592
free: Swap: 369452 428 369024
free: Total: 626312 239860 386452
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 35: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 7
/proc/cpuinfo: model name : Pentium III (Katmai)
/proc/cpuinfo: stepping : 3
/proc/cpuinfo: cpu MHz : 501.235
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
/proc/cpuinfo: bogomips : 1003.81
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0378-037a : parport0
/proc/ioports: 037b-037f : parport0
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 04d0-04d1 : pnp 00:01
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 1000-103f : 0000:00:08.0
/proc/ioports: 1000-103f : eepro100
/proc/ioports: 1040-105f : 0000:00:07.2
/proc/ioports: 1040-105f : uhci_hcd
/proc/ioports: 1060-106f : 0000:00:07.1
/proc/ioports: 1060-1067 : ide0
/proc/ioports: 2000-2fff : PCI Bus #01
/proc/ioports: 2000-20ff : 0000:01:00.0
/proc/ioports: fc00-fc3f : 0000:00:07.3
/proc/ioports: fc00-fc3f : motherboard
/proc/ioports: fc00-fc03 : PM1a_EVT_BLK
/proc/ioports: fc08-fc0b : PM_TMR
/proc/ioports: fc0c-fc0f : GPE0_BLK
/proc/ioports: fc10-fc15 : ACPI CPU throttle
/proc/ioports: fc40-fc4f : 0000:00:07.3
/proc/ioports: fc40-fc4f : motherboard
/proc/ioports: fc40-fc4f : pnp 00:01
/proc/ioports: fc50-fc51 : motherboard
/proc/ioports: fc50-fc51 : PM1a_CNT_BLK
/proc/iomem: 00000000-0009f7ff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009f800-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000ca7ff : Video ROM
/proc/iomem: 000ca800-000cb7ff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-0ffdffff : System RAM
/proc/iomem: 00100000-00273102 : Kernel code
/proc/iomem: 00273103-00301c23 : Kernel data
/proc/iomem: 0ffe0000-0ffefbff : ACPI Tables
/proc/iomem: 0ffefc00-0ffeffff : ACPI Non-volatile Storage
/proc/iomem: 0fff0000-0fffffff : reserved
/proc/iomem: 20000000-200fffff : PCI Bus #01
/proc/iomem: 20000000-2001ffff : 0000:01:00.0
/proc/iomem: f4000000-f40fffff : 0000:00:08.0
/proc/iomem: f4100000-f41fffff : 0000:00:09.0
/proc/iomem: f4200000-f4200fff : 0000:00:08.0
/proc/iomem: f4200000-f4200fff : eepro100
/proc/iomem: f4201000-f4201fff : 0000:00:09.0
/proc/iomem: f4300000-f5ffffff : PCI Bus #01
/proc/iomem: f4300000-f4300fff : 0000:01:00.0
/proc/iomem: f5000000-f5ffffff : 0000:01:00.0
/proc/iomem: f5000000-f57fffff : vesafb
/proc/iomem: f8000000-fbffffff : 0000:00:00.0
/proc/iomem: fff80000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 1297780 XT-PIC timer
/proc/interrupts: 1: 288 XT-PIC i8042
/proc/interrupts: 2: 0 XT-PIC cascade
/proc/interrupts: 7: 0 XT-PIC parport0
/proc/interrupts: 9: 27092 XT-PIC acpi, uhci_hcd:usb1
/proc/interrupts: 11: 509869 XT-PIC eth0
/proc/interrupts: 14: 130556 XT-PIC ide0
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 0
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 256860 kB
/proc/meminfo: MemFree: 17404 kB
/proc/meminfo: Buffers: 9592 kB
/proc/meminfo: Cached: 164276 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 135268 kB
/proc/meminfo: Inactive: 82024 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 256860 kB
/proc/meminfo: LowFree: 17404 kB
/proc/meminfo: SwapTotal: 369452 kB
/proc/meminfo: SwapFree: 369024 kB
/proc/meminfo: Dirty: 3664 kB
/proc/meminfo: Writeback: 12 kB
/proc/meminfo: Mapped: 48284 kB
/proc/meminfo: Slab: 17376 kB
/proc/meminfo: CommitLimit: 497880 kB
/proc/meminfo: Committed_AS: 82504 kB
/proc/meminfo: PageTables: 268 kB
/proc/meminfo: VmallocTotal: 1040080 kB
/proc/meminfo: VmallocUsed: 6200 kB
/proc/meminfo: VmallocChunk: 1033308 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd event0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=046d Product=c00c Version=0620
/proc/bus/input/devices: N: Name="Logitech USB Mouse"
/proc/bus/input/devices: P: Phys=usb-0000:00:07.2-1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=event1
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 40 structures occupying 1180 bytes.
dmidecode: Table at 0x000E0010.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 19 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Phoenix/FUJITSU
dmidecode: Version: Version 1.21
dmidecode: Release Date: 11/30/1999
dmidecode: Address: 0xEA840
dmidecode: Runtime Size: 88000 bytes
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: ISA is supported
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: EDD is supported
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: AGP is supported
dmidecode: LS-120 boot is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: FUJITSU Computers Ltd
dmidecode: Product Name: ErgoPro xS/500
dmidecode: Version: F1V0106E3001
dmidecode: Serial Number: K00133MUF1
dmidecode: UUID: 5B3E5DB4-038F-11D4-8B14-00000EF38035
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: FUJITSU
dmidecode: Product Name: M65
dmidecode: Version:
dmidecode: Serial Number:
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 13 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: FUJITSU
dmidecode: Type: Space-saving
dmidecode: Lock: Not Present
dmidecode: Version:
dmidecode: Serial Number:
dmidecode: Asset Tag: <BAD INDEX>
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Safe
dmidecode: Security Status: None
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: SLOT1
dmidecode: Type: Central Processor
dmidecode: Family: Pentium III
dmidecode: Manufacturer: Intel Corporation
dmidecode: ID: 73 06 00 00 FF F9 83 03
dmidecode: Signature: Type 0, Family 6, Model 7, Stepping 3
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: Version: Intel(TM) Pentium(R) III processor
dmidecode: Voltage: 2.0 V
dmidecode: External Clock: 100 MHz
dmidecode: Max Speed: 500 MHz
dmidecode: Current Speed: 500 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Slot 1
dmidecode: L1 Cache Handle: 0x0008
dmidecode: L2 Cache Handle: 0x0009
dmidecode: L3 Cache Handle: Not Provided
dmidecode:
dmidecode: Handle 0x0005, DMI type 5, 20 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: 64-bit ECC
dmidecode: Error Correcting Capabilities:
dmidecode: Single-bit Error Correcting
dmidecode: Error Scrubbing
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 512 MB
dmidecode: Maximum Total Memory Size: 1024 MB
dmidecode: Supported Speeds:
dmidecode: Other
dmidecode: Supported Memory Types:
dmidecode: ECC
dmidecode: DIMM
dmidecode: SDRAM
dmidecode: Memory Module Voltage: 3.3 V
dmidecode: Associated Memory Slots: 2
dmidecode: 0x0006
dmidecode: 0x0007
dmidecode: Enabled Error Correcting Capabilities:
dmidecode: None
dmidecode:
dmidecode: Handle 0x0006, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM1
dmidecode: Bank Connections: 0 1
dmidecode: Current Speed: Unknown
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: 256 MB (Double-bank Connection)
dmidecode: Enabled Size: 256 MB (Double-bank Connection)
dmidecode: Error Status: See Event Log
dmidecode:
dmidecode: Handle 0x0007, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM2
dmidecode: Bank Connections: 2 3
dmidecode: Current Speed: Unknown
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: See Event Log
dmidecode:
dmidecode: Handle 0x0008, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 32 KB
dmidecode: Maximum Size: 32 KB
dmidecode: Supported SRAM Types:
dmidecode: Unknown
dmidecode: Installed SRAM Type: Unknown
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x0009, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 512 KB
dmidecode: Maximum Size: 512 KB
dmidecode: Supported SRAM Types:
dmidecode: Unknown
dmidecode: Installed SRAM Type: Unknown
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x000A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Parallel
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: PRINTER
dmidecode: External Connector Type: DB-25 female
dmidecode: Port Type: Parallel Port PS/2
dmidecode:
dmidecode: Handle 0x000B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Serial 1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: SERIAL PORT 1
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: IrDA
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: IrDA PORT
dmidecode: External Connector Type: Infrared
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: KB/MS
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: KEYBOARD
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: KB/MS
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: MOUSE
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB CN5 (Rear)
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB CN24 (Front)
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: USB
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: FRONT PANEL
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: MICROPHONE
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Sound CN100
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: SPEAKER OUT
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Sound CN101
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LINE OUT
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Sound CN102
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LINE IN
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: VGA
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: ANALOG VGA
dmidecode: External Connector Type: DB-15 female
dmidecode: Port Type: Video Port
dmidecode:
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LAN
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: NETWORK
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x001A, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x001B, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x001E, DMI type 10, 10 bytes
dmidecode: On Board Device 1 Information
dmidecode: Type: Sound
dmidecode: Status: Enabled
dmidecode: Description: Crystal CS4280
dmidecode: On Board Device 2 Information
dmidecode: Type: Video
dmidecode: Status: Enabled
dmidecode: Description: ATI RageXL
dmidecode: On Board Device 3 Information
dmidecode: Type: Ethernet
dmidecode: Status: Enabled
dmidecode: Description: Intel 82559
dmidecode:
dmidecode: Handle 0x001F, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 2
dmidecode: en|US|iso8859-1
dmidecode: <BAD INDEX>
dmidecode: Currently Installed Language: en|US|iso8859-1
dmidecode:
dmidecode: Handle 0x0020, DMI type 15, 39 bytes
dmidecode: System Event Log
dmidecode: Area Length: 2048 bytes
dmidecode: Header Start Offset: 0x0000
dmidecode: Header Length: 16 bytes
dmidecode: Data Start Offset: 0x0010
dmidecode: Access Method: General-purpose non-volatile data functions
dmidecode: Access Address: 0x0000
dmidecode: Status: Valid, Not Full
dmidecode: Change Token: 0x00000007
dmidecode: Header Format: Type 1
dmidecode: Supported Log Type Descriptors: 8
dmidecode: Descriptor 1: Single-bit ECC memory error
dmidecode: Data Format 1: Multiple-event
dmidecode: Descriptor 2: Multi-bit ECC memory error
dmidecode: Data Format 2: Multiple-event
dmidecode: Descriptor 3: POST memory resize
dmidecode: Data Format 3: None
dmidecode: Descriptor 4: System limit exceeded
dmidecode: Data Format 4: System management
dmidecode: Descriptor 5: System reconfigured
dmidecode: Data Format 5: None
dmidecode: Descriptor 6: Log area reset/cleared
dmidecode: Data Format 6: None
dmidecode: Descriptor 7: System boot
dmidecode: Data Format 7: None
dmidecode: Descriptor 8: OEM-specific
dmidecode: Data Format 8: None
dmidecode:
dmidecode: Handle 0x0021, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: Multi-bit ECC
dmidecode: Maximum Capacity: 512 MB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 2
dmidecode:
dmidecode: Handle 0x0022, DMI type 17, 21 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0021
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 18 bits
dmidecode: Data Width: 16 bits
dmidecode: Size: 256 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM1
dmidecode: Bank Locator: Bank 0/1
dmidecode: Type: DRAM
dmidecode: Type Detail: Synchronous
dmidecode:
dmidecode: Handle 0x0023, DMI type 17, 21 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0021
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM2
dmidecode: Bank Locator: Bank 2/3
dmidecode: Type: DRAM
dmidecode: Type Detail: Synchronous
dmidecode:
dmidecode: Handle 0x0024, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0000FFFFFFF
dmidecode: Range Size: 256 MB
dmidecode: Physical Array Handle: 0x0021
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x0025, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0000FFFFFFF
dmidecode: Range Size: 256 MB
dmidecode: Physical Device Handle: 0x0022
dmidecode: Memory Array Mapped Address Handle: 0x0024
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0026, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0027, DMI type 24, 5 bytes
dmidecode: Hardware Security
dmidecode: Power-On Password Status: Disabled
dmidecode: Keyboard Password Status: Unknown
dmidecode: Administrator Password Status: Enabled
dmidecode: Front Panel Reset Status: Unknown
dmidecode:
dmidecode: Handle 0x0028, DMI type 25, 9 bytes
dmidecode: System Power Controls
dmidecode: Next Scheduled Power-on: 12-* 00:00:00
dmidecode:
dmidecode: Handle 0x0029, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x002A, DMI type 128, 12 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 80 0C 2A 00 01 01 02 00 00 00 40 01
dmidecode: Strings:
dmidecode: Alert on LAN
dmidecode: FUJITSU M65
dmidecode:
dmidecode: Handle 0x002B, DMI type 126, 4 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x002C, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: ttf-thai-tlwg-udeb
Status: install ok unpacked
Version: 1:0.4.4-5
Description: Thai fonts in TrueType format for D-I use
Package: usb-storage-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: USB storage support
Package: scsi-common-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-common-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di
Description: Very common SCSI drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.17
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.22
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6-15
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.07
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: floppy-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: floppy-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Floppy driver
Package: lowmemcheck
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.11
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.42), cdebconf-udeb
Description: Debian installer main menu
Package: ttf-khmeros-udeb
Status: install ok unpacked
Version: 3.10-3
Provides: ttf-installer
Description: Debian-Installer font for the Khmer language of Cambodia
Package: di-utils-shell
Status: install ok unpacked
Version: 1.32
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: ttf-dejavu-udeb
Status: install ok unpacked
Version: 2.7-2
Description: Bitstream Vera fonts with additional characters for D-I use
Package: di-utils
Status: install ok installed
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42), cdebconf-udeb (>= 0.97)
Description: Miscellaneous utilities for the debian installer
Package: ttf-cjk-compact-udeb
Status: install ok unpacked
Version: 1.4
Description: Shrinked CJK TrueType fonts for GUI d-i.
Package: serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: serial-modules
Depends: kernel-image-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Description: Serial drivers
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: ttf-freefont-udeb
Status: install ok unpacked
Version: 20060501cvs-8
Provides: ttf-installer
Description: Freefont Sans fonts for the graphical installer
Package: ttf-dzongkha-udeb
Status: install ok unpacked
Version: 0.2-2
Provides: ttf-installer
Description: TrueType fonts for Dzongkha language
Package: ide-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: ide-core-modules
Depends: kernel-image-2.6.16-2-486-di
Description: IDE support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.33
Depends: di-utils (>= 1.24)
Description: Skeleton root filesystem used by debian-installer
Package: pcmcia-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: pcmcia-modules
Depends: kernel-image-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Description: Common PCMCIA drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.093-1
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: scsi-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-core-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Core SCSI subsystem
Package: firewire-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.16-2-486-di, kernel-image-2.6.16-2-486-di
Description: Core FireWire drivers
Package: libpng12-0-udeb
Status: install ok unpacked
Version: 1.2.8rel-5.2
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: PNG library - minimal runtime library
Package: libnss-files-udeb
Status: install ok unpacked
Version: 2.3.6-15
Description: GNU C Library: NSS helper for files - udeb
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-3
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: pcmcia-storage-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Description: PCMCIA storage drivers
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-3
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libcairo-directfb2-udeb
Status: install ok unpacked
Version: 1.2.0-3
Depends: fontconfig-udeb (>= 2.3.0), libc6 (>= 2.3.6-6), libdirectfb-0.9-24-udeb, libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>= 1.2.8rel), zlib1g-udeb (>= 1:1.2.1)
Description: The Cairo 2D vector graphics library DirectFB build
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: usb-discover
Status: install ok unpacked
Version: 1.05
Description: Discover USB and load kernel modules
Package: libdirectfb-0.9-22-udeb
Status: install ok unpacked
Version: 0.9.22-10+b1
Depends: libc6 (>= 2.3.6-6), libfreetype6-udeb (>= 2.1.5-1), libpng12-0-udeb (>= 1.2.8rel), libsysfs2-udeb, zlib1g-udeb (>= 1:1.2.1)
Description: frame buffer graphics library
Package: rescue-check
Status: install ok unpacked
Version: 1.4
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.12-2
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.1-1)
Description: free Pico clone with some new features - tiny build
Package: rootskel-gtk
Status: install ok unpacked
Version: 0.08
Depends: rootskel, mouse-modules
Description: Additions for graphical installation to skeleton root filesystem used by debian-installer
Package: cdebconf-udeb
Status: install ok installed
Version: 0.104+b1
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: libpango1.0-udeb
Status: install ok unpacked
Version: 1.12.3-1+b1
Depends: fontconfig-udeb (>= 2.3.0), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.0), libfreetype6-udeb (>= 2.2), libglib2.0-udeb (>= 2.10.0), zlib1g-udeb (>= 1:1.2.1)
Description: Layout and rendering of internationalized text
Package: load-cdrom
Status: install ok installed
Version: 1.11
Depends: cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: libgtk+2.0-directfb0-udeb
Status: install ok unpacked
Version: 2.0.9.2-14.3
Depends: libatk1.0-udeb (>= 1.9.0), libc6 (>= 2.3.6-6), libdirectfb-0.9-22-udeb, libfreetype6-udeb (>= 2.1.5-1), libglib2.0-udeb (>= 2.10.0), libpango1.0-udeb (>= 1.12.1), libpng12-0-udeb (>= 1.2.8rel), zlib1g-udeb (>= 1:1.2.1)
Description: gtk+2.0 implementation for the frame buffer
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: libdirectfb-0.9-24-udeb
Status: install ok unpacked
Version: 0.9.24-4
Provides: libdirectfb-0.9-24
Depends: libc6 (>= 2.3.6-6), libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>= 1.2.8rel), libsysfs2-udeb, zlib1g-udeb (>= 1:1.2.1)
Description: frame buffer graphics library
Package: libfreetype6-udeb
Status: install ok unpacked
Version: 2.2.1-2
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: FreeType 2 font engine for the debian-installer
Package: iso-3166-udeb
Status: install ok installed
Version: 0.52-1
Description: provides iso_3166.tab file
Package: cdrom-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: cdrom-core-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, ide-modules-2.6.16-2-486-di
Description: CDROM support
Package: ttf-farsiweb-udeb
Status: install ok unpacked
Version: 0.4-4
Provides: ttf-installer
Description: Farsiweb TrueType fonts for the graphical installer
Package: fat-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fat-modules
Depends: kernel-image-2.6.16-2-486-di
Description: FAT filesystem support
Package: floppy-retriever
Status: install ok unpacked
Version: 1.09
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: libexpat1-udeb
Status: install ok unpacked
Version: 1.95.8-3.2
Provides: libexpat1
Depends: libc6 (>= 2.3.5-1)
Description: XML parsing C library - runtime library
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-2
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.17
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.40
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43)
Description: Hardware architecture detector
Package: ttf-bpg-georgian-fonts-udeb
Status: install ok unpacked
Version: 0.3
Provides: ttf-installer
Description: BPG Georgian fonts for the graphical installer
Package: fb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Frame buffer support
Package: save-logs
Status: install ok unpacked
Version: 2.17
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.32
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.24
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: kernel-image-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: ide-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: ide-modules
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di
Description: IDE drivers
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.1-2
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.0-2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: input-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: input-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: Input devices support
Package: ttf-tamil-fonts-udeb
Status: install ok unpacked
Version: 1:0.4.7.1
Provides: ttf-installer
Description: Free TrueType fonts for the Tamil language
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.32
Description: Terminfo entries needed by newt/slang in debian installer
Package: scsi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, parport-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Description: SCSI drivers
Package: hw-detect
Status: install ok installed
Version: 1.40
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.29
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.43
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: mouse-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: mouse-modules
Depends: kernel-image-2.6.16-2-486-di, input-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: Mouse support
Package: fontconfig-udeb
Status: install ok unpacked
Version: 2.3.2-7
Depends: libc6 (>= 2.3.6-6), libexpat1-udeb (>= 1.95.8), libfreetype6-udeb (>= 2.2), zlib1g-udeb (>= 1:1.2.1)
Description: generic font configuration library - minimal runtime
Package: acpi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: acpi-modules
Depends: kernel-image-2.6.16-2-486-di
Description: ACPI support modules
Package: cdebconf-gtk-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, libatk1.0-udeb (>= 1.12.1), libc6 (>= 2.3.6-6), libdirectfb-0.9-22-udeb, libglib2.0-udeb (>= 2.10.0), libgtk+2.0-directfb0-udeb, libpango1.0-udeb (>= 1.12.3), zlib1g-udeb (>= 1:1.2.1), rootskel-gtk (>= 0.05)
Description: Gtk+ frontend for Debian Configuration Management System
Package: firmware-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: firmware-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Firmware request modules
Package: sata-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: sata-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Description: SATA drivers
Package: cdrom-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: cdrom-modules
Depends: ide-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, kernel-image-2.6.16-2-486-di
Description: Esoteric CDROM drivers
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.17
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.6
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.104
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: file-preseed
Status: install ok unpacked
Version: 1.17
Depends: di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: libglib2.0-udeb
Status: install ok unpacked
Version: 2.10.3-3
Depends: libc6 (>= 2.3.6-6)
Description: The GLib library of C routines
Package: usb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: USB support
Package: usb-serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-serial-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: USB serial drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.104+b1
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: libatk1.0-udeb
Status: install ok unpacked
Version: 1.12.1-1
Depends: libc6 (>= 2.3.6-6), libglib2.0-udeb (>= 2.10.0)
Description: The ATK accessibility toolkit
Package: cdrom-detect
Status: install ok installed
Version: 1.16
Depends: hw-detect, di-utils (>= 1.15)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: parport-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: parport-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Parallel port support
Package: debian-installer
Status: install ok installed
Version: cdrom-gtk-20060806
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: cdrom-detect
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: choose-mirror-bin
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: apt-mirror-setup, base-installer (>= 1.49)
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.64
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.4
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.6-6), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.04
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: crypto-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: crypto-modules
Description: crypto modules
This package contains crypto modules.
Package: cryptsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 400
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Version: 2:1.0.3-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2), libpopt0-udeb (>= 1.10), libuuid1-udeb, dmsetup-udeb
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: dmsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 352
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.6
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76
Package: ethdetect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: ethernet-card-detection
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: ext3-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-10
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.4
Depends: archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gnupg-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 664
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.3-2
Depends: libc6 (>= 2.3.6-6), libusb-0.1-udeb (>= 2:0.1.12), zlib1g-udeb (>= 1:1.2.1)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1592
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6-15
Provides: libc6, libc-udeb, glibc-2.3.6-2, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libiw28-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 24
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libpopt0-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Paul Martin <pm@debian.org>
Version: 1.10-2
Depends: libc6 (>= 2.3.6-6)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
.
This is a minimal package for use in debian-installer.
Package: libusb-0.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Aurelien Jarno <aurel32@debian.org>
Version: 2:0.1.12-2
Depends: libc6 (>= 2.3.5-1)
Provides: libusb-0.1-4
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
More information can be found at the Linux USB web site
http://www.linux-usb.org/ .
.
This is a minimal package for use in debian-installer.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 20
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-aes-2.6.16-2-486-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 148
Maintainer: Max Vozeler <xam@debian.org>
Version: 3.1d+3+3
Depends: kernel-image-2.6.16-2-486-di, mount-aes-udeb (>= 2.12p-1)
Provides: loop-aes-modules
Description: loop-AES encryption modules for kernel 2.6.16-2-486-di
This package contains the loop-AES loadable Linux kernel modules
compiled for kernel 2.6.16-2-486-di
.
loop-AES can be used to encrypt disk partitions, removable media,
swap space and other devices. It provides measures to strengthen
the encryption: Passphrase seeds, multiple hash iterations, MD5 IV
and use of alternating encryption keys.
.
Encryption keys can be stored in a GnuPG-encrypted keyfile, which
allows the passphrase to be changed without re-encryption. Keyfiles
can also be encrypted asymmetrically for multi-user access.
.
This package includes the cipher modules blowfish, twofish and
serpent in addition to the default cipher (AES).
.
If you compiled a custom kernel, you will most likely need to
compile a custom version of these modules as well. The package
loop-aes-source has been provided for this purpose.
Package: loop-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 396
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-2
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 140
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.2-7
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices (software RAID), as well as multipath devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-3
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: mount-aes-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 216
Maintainer: Max Vozeler <xam@debian.org>
Version: 2.12r-13
Depends: libblkid1-udeb (>= 1.37-1), libc6 (>= 2.3.6-6), libuuid1-udeb
Description: Mount utils for loop-AES
loop-AES patched mount, losetup and swapon
Package: netcfg
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 788
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Provides: configured-network
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
Installer-Menu-Item: 18
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2648
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, crc-modules-2.6.16-2-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, firewire-core-modules-2.6.16-2-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 588
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, nic-extra-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfstools-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 164
Maintainer: David MartÃnez Moreno <ender@debian.org>
Version: 1.12.1-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 656
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 54
Depends: di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base (>= 73), partman-auto (>= 51), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 836
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 92
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 564
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 692
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-base (>= 87), partman-crypto-dm, partman-crypto-loop, cdebconf-newt-entropy (>= 0.3), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-crypto-dm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, crypto-modules, cryptsetup-udeb
Description: Add to partman support for dm-crypt encryption
Package: partman-crypto-loop
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, loop-aes-modules, mount-aes-udeb, gnupg-udeb
Description: Add to partman support for loop-AES encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 10
Depends: partman-base
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 252
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 616
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 40
Depends: ntfstools-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 228
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-8
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.07.1
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: scsi-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 580
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.4-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-686
Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii reportbug 3.21.2 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---