Bug#436156: installation-reports: Inst report TP35D2-A7 (SATA difficulties)
Package: installation-reports
Severity: important
-- Package-specific info:
Boot method: CD
Image version: Lenny 20070719
Date: July 21-22, 2007
Machine: Biostar TP35D2-A7 motherboard with Intel E4300
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda1 ext3 6728280 3567584 2818916 56% /
tmpfs tmpfs 1037832 0 1037832 0% /lib/init/rw
udev tmpfs 10240 92 10148 1% /dev
tmpfs tmpfs 1037832 0 1037832 0% /dev/shm
/dev/sda6 ext3 144492840 40697428 96455316 30% /home
/dev/sdb1 ext3 76920416 221160 75917776 1% /backup
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [E]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [E]
Install base system: [O]
Clock/timezone setup: [E]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [E]
Comments/Problems:
The show stopping problem was that the installer failed to detect the
SATA CD and the install ground to a halt. I hooked up a PATA CD and
the installation proceeded until it started to look for hard drives.
Then it failed to find the SATA hard drives.
After a great deal of investigation I found that if I selected
"legacy" mode for IDE in the BIOS then the SATA devices, both hard
drives and CD were detected and the installer was able to proceed.
The motherboard hardware is an Intel P35 with Intel ICH9. It appears
from the listing below that much of the hardware is coming up as
"unknown". If there's some way I can help register my hardware let me
know.
Once I got over this hurdle I partitioned my first hard drive without
difficulty using the installer. However, when I tried to get the
installer to partition the second hard drive it seemed like it
wouldn't give me the option of just having one big partition, so I
gave up and partitioned that disk manually after the install.
The hwclock command is broken which meant that any time I rebooted the
clock would be set to some bizarre value. The wrong fix is to add
HWCLOCKPARS=--directisa
to /etc/init.d/hwclock.sh. This at least gets it to work. But I
believe that the right fix is to get the module rtc-dev to load
instead of rtc. (I don't know how to do this.)
When hwclock is run with the system as installed this error appears:
select() to /dev/rtc to wait for clock tick timed out
If I unload rtc and load rtc-dev then it works properly.
When I got into X the mouse was dead (probably a fairly bad problem
for a novice user). The mouse is a Logitech LX3 that I had plugged
into the PS/2 port. I plugged it into a USB port instead and then it
worked. I modified xorg.conf to list the mouse device as /etc/psaux
and then it worked in the PS/2 port. (Note, however, that nothing I
have found makes the tilt wheel work.)
I have fairly new hardware. If there's some way I can help improve
the support of this hardware I'm willing to help.
radian@cox.net
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="lenny (installer build 20070718-19:05)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux alpaca 2.6.21-2-486 #1 Wed Jul 11 03:17:09 UTC 2007 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Unknown device [8086:29c0] (rev 02)
lspci -nn: 00:01.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:29c1] (rev 02)
lspci -nn: 00:1a.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:2937] (rev 02)
lspci -nn: 00:1a.1 USB Controller [0c03]: Intel Corporation Unknown device [8086:2938] (rev 02)
lspci -nn: 00:1a.2 USB Controller [0c03]: Intel Corporation Unknown device [8086:2939] (rev 02)
lspci -nn: 00:1a.7 USB Controller [0c03]: Intel Corporation Unknown device [8086:293c] (rev 02)
lspci -nn: 00:1b.0 Audio device [0403]: Intel Corporation Unknown device [8086:293e] (rev 02)
lspci -nn: 00:1c.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:2940] (rev 02)
lspci -nn: 00:1c.5 PCI bridge [0604]: Intel Corporation Unknown device [8086:294a] (rev 02)
lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:2934] (rev 02)
lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation Unknown device [8086:2935] (rev 02)
lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation Unknown device [8086:2936] (rev 02)
lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation Unknown device [8086:293a] (rev 02)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation Unknown device [8086:2918] (rev 02)
lspci -nn: 00:1f.2 IDE interface [0101]: Intel Corporation Unknown device [8086:2921] (rev 02)
lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation Unknown device [8086:2930] (rev 02)
lspci -nn: 00:1f.5 IDE interface [0101]: Intel Corporation Unknown device [8086:2926] (rev 02)
lspci -nn: 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 LE] [10de:0163] (rev a1)
lspci -nn: 03:00.0 IDE interface [0101]: JMicron Technologies, Inc. Unknown device [197b:2368]
lspci -nn: 04:04.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169SC Gigabit Ethernet [10ec:8167] (rev 10)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation Unknown device [8086:29c0] (rev 02)
lspci -vnn: Subsystem: Intel Corporation Unknown device [8086:29c0]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Capabilities: [e0] Vendor Specific Information
lspci -vnn:
lspci -vnn: 00:01.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:29c1] (rev 02)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
lspci -vnn: I/O behind bridge: 0000b000-0000bfff
lspci -vnn: Memory behind bridge: fa000000-fcffffff
lspci -vnn: Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
lspci -vnn: Capabilities: [88] Subsystem: Intel Corporation Unknown device [8086:0000]
lspci -vnn: Capabilities: [80] Power Management version 3
lspci -vnn: Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [a0] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn: Capabilities: [140] Unknown (5)
lspci -vnn:
lspci -vnn: 00:1a.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:2937] (rev 02)
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:3105]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 16
lspci -vnn: I/O ports at ff00 [size=32]
lspci -vnn: Capabilities: [50] #13 [0306]
lspci -vnn:
lspci -vnn: 00:1a.1 USB Controller [0c03]: Intel Corporation Unknown device [8086:2938] (rev 02)
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:3105]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 18
lspci -vnn: I/O ports at fe00 [size=32]
lspci -vnn: Capabilities: [50] #13 [0306]
lspci -vnn:
lspci -vnn: 00:1a.2 USB Controller [0c03]: Intel Corporation Unknown device [8086:2939] (rev 02)
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:3105]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 19
lspci -vnn: I/O ports at fd00 [size=32]
lspci -vnn: Capabilities: [50] #13 [0306]
lspci -vnn:
lspci -vnn: 00:1a.7 USB Controller [0c03]: Intel Corporation Unknown device [8086:293c] (rev 02) (prog-if 20)
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:3105]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 21
lspci -vnn: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1b.0 Audio device [0403]: Intel Corporation Unknown device [8086:293e] (rev 02)
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:820c]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 9
lspci -vnn: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
lspci -vnn: Capabilities: [70] Express Unknown type IRQ 0
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn: Capabilities: [130] Unknown (5)
lspci -vnn:
lspci -vnn: 00:1c.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:2940] (rev 02)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
lspci -vnn: I/O behind bridge: 0000e000-0000efff
lspci -vnn: Memory behind bridge: fdd00000-fddfffff
lspci -vnn: Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [90] Subsystem: Intel Corporation Unknown device [8086:2940]
lspci -vnn: Capabilities: [a0] Power Management version 2
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn: Capabilities: [180] Unknown (5)
lspci -vnn:
lspci -vnn: 00:1c.5 PCI bridge [0604]: Intel Corporation Unknown device [8086:294a] (rev 02)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
lspci -vnn: I/O behind bridge: 0000d000-0000dfff
lspci -vnn: Memory behind bridge: fd900000-fd9fffff
lspci -vnn: Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [90] Subsystem: Intel Corporation Unknown device [8086:294a]
lspci -vnn: Capabilities: [a0] Power Management version 2
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn: Capabilities: [180] Unknown (5)
lspci -vnn:
lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:2934] (rev 02)
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:3105]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 20
lspci -vnn: I/O ports at fc00 [size=32]
lspci -vnn: Capabilities: [50] #13 [0306]
lspci -vnn:
lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation Unknown device [8086:2935] (rev 02)
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:3105]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 19
lspci -vnn: I/O ports at fb00 [size=32]
lspci -vnn: Capabilities: [50] #13 [0306]
lspci -vnn:
lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation Unknown device [8086:2936] (rev 02)
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:3105]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 21
lspci -vnn: I/O ports at fa00 [size=32]
lspci -vnn: Capabilities: [50] #13 [0306]
lspci -vnn:
lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation Unknown device [8086:293a] (rev 02) (prog-if 20)
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:3105]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 20
lspci -vnn: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
lspci -vnn: I/O behind bridge: 0000c000-0000cfff
lspci -vnn: Memory behind bridge: fdc00000-fdcfffff
lspci -vnn: Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
lspci -vnn: Capabilities: [50] Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:3105]
lspci -vnn:
lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation Unknown device [8086:2918] (rev 02)
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:3105]
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn: Capabilities: [e0] Vendor Specific Information
lspci -vnn:
lspci -vnn: 00:1f.2 IDE interface [0101]: Intel Corporation Unknown device [8086:2921] (rev 02) (prog-if 8a [Master SecP PriP])
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:5204]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
lspci -vnn: I/O ports at 01f0 [size=8]
lspci -vnn: I/O ports at 03f4 [size=1]
lspci -vnn: I/O ports at 0170 [size=8]
lspci -vnn: I/O ports at 0374 [size=1]
lspci -vnn: I/O ports at f900 [size=16]
lspci -vnn: I/O ports at f800 [size=16]
lspci -vnn: Capabilities: [70] Power Management version 3
lspci -vnn: Capabilities: [b0] #13 [0306]
lspci -vnn:
lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation Unknown device [8086:2930] (rev 02)
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:3105]
lspci -vnn: Flags: medium devsel, IRQ 11
lspci -vnn: Memory at fdffd000 (64-bit, non-prefetchable) [size=256]
lspci -vnn: I/O ports at 0500 [size=32]
lspci -vnn:
lspci -vnn: 00:1f.5 IDE interface [0101]: Intel Corporation Unknown device [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:5204]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
lspci -vnn: I/O ports at f600 [size=8]
lspci -vnn: I/O ports at f500 [size=4]
lspci -vnn: I/O ports at f400 [size=8]
lspci -vnn: I/O ports at f300 [size=4]
lspci -vnn: I/O ports at f200 [size=16]
lspci -vnn: I/O ports at f100 [size=16]
lspci -vnn: Capabilities: [70] Power Management version 3
lspci -vnn: Capabilities: [b0] #13 [0306]
lspci -vnn:
lspci -vnn: 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 LE] [10de:0163] (rev a1)
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 3
lspci -vnn: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: Memory at d0000000 (64-bit, prefetchable) [size=256M]
lspci -vnn: Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
lspci -vnn: [virtual] Expansion ROM at fc000000 [disabled] [size=128K]
lspci -vnn: Capabilities: [60] Power Management version 2
lspci -vnn: Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
lspci -vnn: Capabilities: [78] Express Endpoint IRQ 0
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn: Capabilities: [128] Power Budgeting
lspci -vnn:
lspci -vnn: 03:00.0 IDE interface [0101]: JMicron Technologies, Inc. Unknown device [197b:2368] (prog-if 85 [Master SecO PriO])
lspci -vnn: Subsystem: JMicron Technologies, Inc. Unknown device [197b:2368]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 17
lspci -vnn: I/O ports at df00 [size=8]
lspci -vnn: I/O ports at de00 [size=4]
lspci -vnn: I/O ports at dd00 [size=8]
lspci -vnn: I/O ports at dc00 [size=4]
lspci -vnn: I/O ports at db00 [size=16]
lspci -vnn: [virtual] Expansion ROM at fde00000 [disabled] [size=64K]
lspci -vnn: Capabilities: [68] Power Management version 2
lspci -vnn: Capabilities: [50] Express Legacy Endpoint IRQ 1
lspci -vnn: Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
lspci -vnn:
lspci -vnn: 04:04.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169SC Gigabit Ethernet [10ec:8167] (rev 10)
lspci -vnn: Subsystem: Biostar Microtech Int'l Corp Unknown device [1565:2304]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 22
lspci -vnn: I/O ports at ce00 [size=256]
lspci -vnn: Memory at fdcff000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: [virtual] Expansion ROM at fdb00000 [disabled] [size=128K]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
modulemap: 8086:2937 uhci_hcd
modulemap: 8086:2938 uhci_hcd
modulemap: 8086:2939 uhci_hcd
modulemap: 8086:293c ehci_hcd
modulemap: 8086:2934 uhci_hcd
modulemap: 8086:2935 uhci_hcd
modulemap: 8086:2936 uhci_hcd
modulemap: 8086:293a ehci_hcd
modulemap: 8086:2921 ata_piix
modulemap: 8086:2926 ata_piix
modulemap: 197b:2368 jmicron
modulemap: 10ec:8167 r8169
lsmod: Module Size Used by
lsmod: qnx4 10756 0
lsmod: ntfs 197952 0
lsmod: xfs 496244 0
lsmod: reiserfs 216704 0
lsmod: jfs 162780 0
lsmod: ext3 118024 2
lsmod: jbd 49704 1 ext3
lsmod: vfat 11648 0
lsmod: fat 47516 1 vfat
lsmod: r8169 28424 0
lsmod: nls_iso8859_1 4096 0
lsmod: rsrc_nonstatic 11904 0
lsmod: pcmcia_core 36624 1 rsrc_nonstatic
lsmod: isofs 32056 0
lsmod: ide_disk 15488 0
lsmod: ide_generic 1280 0 [permanent]
lsmod: pdc202xx_new 7808 0 [permanent]
lsmod: aec62xx 7040 0 [permanent]
lsmod: alim15x3 11660 0 [permanent]
lsmod: amd74xx 13468 0 [permanent]
lsmod: atiixp 6032 0 [permanent]
lsmod: cmd64x 10012 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 5120 0 [permanent]
lsmod: cs5535 4480 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 5120 0 [permanent]
lsmod: hpt366 15872 0 [permanent]
lsmod: it821x 7940 0 [permanent]
lsmod: ns87415 4296 0 [permanent]
lsmod: opti621 4100 0 [permanent]
lsmod: pdc202xx_old 9472 0 [permanent]
lsmod: piix 9476 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 11008 0 [permanent]
lsmod: sis5513 12808 0 [permanent]
lsmod: slc90e66 5248 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 4228 0 [permanent]
lsmod: via82cxxx 8708 0 [permanent]
lsmod: usb_storage 75456 0
lsmod: vga16fb 13068 2
lsmod: vgastate 8448 1 vga16fb
lsmod: thermal 13960 0
lsmod: processor 23596 1 thermal
lsmod: fan 4868 0
lsmod: sg 32540 0
lsmod: sd_mod 19728 4
lsmod: sr_mod 16036 0
lsmod: ide_cd 36384 0
lsmod: cdrom 32544 2 sr_mod,ide_cd
lsmod: ata_piix 13444 3
lsmod: libata 109204 1 ata_piix
lsmod: scsi_mod 133260 5 usb_storage,sg,sd_mod,sr_mod,libata
lsmod: usbhid 23008 0
lsmod: hid 22784 1 usbhid
lsmod: parport_pc 32292 0
lsmod: parport 32584 1 parport_pc
lsmod: jmicron 4096 0 [permanent]
lsmod: generic 4868 0 [permanent]
lsmod: ide_core 112932 32 ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,hpt366,it821x,ns87415,opti621,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,jmicron,generic
lsmod: ehci_hcd 30220 0
lsmod: uhci_hcd 22032 0
lsmod: usbcore 120856 5 usb_storage,usbhid,ehci_hcd,uhci_hcd
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 453292 428 452864 0% /dev
df: tmpfs 453292 428 452864 0% /dev
df: tmpfs 453292 428 452864 0% /.dev
df: /dev/scsi/host0/bus0/target0/lun0/part1 6728280 2484300 3902200 39% /target
df: /dev/scsi/host0/bus0/target0/lun0/part6 144492840 192148 136960596 0% /target/home
free: total used free shared buffers
free: Mem: 906588 881960 24628 0 70196
free: Swap: 2650684 424 2650260
free: Total: 3557272 882384 2674888
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 15
/proc/cpuinfo: model name : Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 1800.056
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 10
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips : 3602.50
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : 0000:00:1f.2
/proc/ioports: 0170-0177 : libata
/proc/ioports: 01f0-01f7 : 0000:00:1f.2
/proc/ioports: 01f0-01f7 : libata
/proc/ioports: 0376-0376 : 0000:00:1f.2
/proc/ioports: 0376-0376 : libata
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : 0000:00:1f.2
/proc/ioports: 03f6-03f6 : libata
/proc/ioports: 0400-04bf : pnp 00:0b
/proc/ioports: 0400-0403 : ACPI PM1a_EVT_BLK
/proc/ioports: 0404-0405 : ACPI PM1a_CNT_BLK
/proc/ioports: 0408-040b : ACPI PM_TMR
/proc/ioports: 0420-042f : ACPI GPE0_BLK
/proc/ioports: 0500-051f : 0000:00:1f.3
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: b000-bfff : PCI Bus #01
/proc/ioports: c000-cfff : PCI Bus #04
/proc/ioports: ce00-ceff : 0000:04:04.0
/proc/ioports: ce00-ceff : r8169
/proc/ioports: d000-dfff : PCI Bus #03
/proc/ioports: db00-db0f : 0000:03:00.0
/proc/ioports: db00-db07 : ide0
/proc/ioports: db08-db0f : ide1
/proc/ioports: dc00-dc03 : 0000:03:00.0
/proc/ioports: dd00-dd07 : 0000:03:00.0
/proc/ioports: de00-de03 : 0000:03:00.0
/proc/ioports: de02-de02 : ide0
/proc/ioports: df00-df07 : 0000:03:00.0
/proc/ioports: df00-df07 : ide0
/proc/ioports: e000-efff : PCI Bus #02
/proc/ioports: f100-f10f : 0000:00:1f.5
/proc/ioports: f100-f10f : libata
/proc/ioports: f200-f20f : 0000:00:1f.5
/proc/ioports: f200-f20f : libata
/proc/ioports: f300-f303 : 0000:00:1f.5
/proc/ioports: f300-f303 : libata
/proc/ioports: f400-f407 : 0000:00:1f.5
/proc/ioports: f400-f407 : libata
/proc/ioports: f500-f503 : 0000:00:1f.5
/proc/ioports: f500-f503 : libata
/proc/ioports: f600-f607 : 0000:00:1f.5
/proc/ioports: f600-f607 : libata
/proc/ioports: f800-f80f : 0000:00:1f.2
/proc/ioports: f900-f90f : 0000:00:1f.2
/proc/ioports: f900-f90f : libata
/proc/ioports: fa00-fa1f : 0000:00:1d.2
/proc/ioports: fa00-fa1f : uhci_hcd
/proc/ioports: fb00-fb1f : 0000:00:1d.1
/proc/ioports: fb00-fb1f : uhci_hcd
/proc/ioports: fc00-fc1f : 0000:00:1d.0
/proc/ioports: fc00-fc1f : uhci_hcd
/proc/ioports: fd00-fd1f : 0000:00:1a.2
/proc/ioports: fd00-fd1f : uhci_hcd
/proc/ioports: fe00-fe1f : 0000:00:1a.1
/proc/ioports: fe00-fe1f : uhci_hcd
/proc/ioports: ff00-ff1f : 0000:00:1a.0
/proc/ioports: ff00-ff1f : uhci_hcd
/proc/iomem: 00000000-0009f3ff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009f400-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cedff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-7fedffff : System RAM
/proc/iomem: 00100000-00297564 : Kernel code
/proc/iomem: 00297565-00338cf3 : Kernel data
/proc/iomem: 7fee0000-7fee2fff : ACPI Non-volatile Storage
/proc/iomem: 7fee3000-7feeffff : ACPI Tables
/proc/iomem: 7fef0000-7fefffff : reserved
/proc/iomem: 7ff00000-7fffffff : pnp 00:0e
/proc/iomem: d0000000-dfffffff : PCI Bus #01
/proc/iomem: d0000000-dfffffff : 0000:01:00.0
/proc/iomem: e0000000-efffffff : reserved
/proc/iomem: fa000000-fcffffff : PCI Bus #01
/proc/iomem: fa000000-faffffff : 0000:01:00.0
/proc/iomem: fb000000-fbffffff : 0000:01:00.0
/proc/iomem: fc000000-fc01ffff : 0000:01:00.0
/proc/iomem: fd900000-fd9fffff : PCI Bus #03
/proc/iomem: fda00000-fdafffff : PCI Bus #02
/proc/iomem: fdb00000-fdbfffff : PCI Bus #04
/proc/iomem: fdb00000-fdb1ffff : 0000:04:04.0
/proc/iomem: fdc00000-fdcfffff : PCI Bus #04
/proc/iomem: fdcff000-fdcff0ff : 0000:04:04.0
/proc/iomem: fdcff000-fdcff0ff : r8169
/proc/iomem: fdd00000-fddfffff : PCI Bus #02
/proc/iomem: fde00000-fdefffff : PCI Bus #03
/proc/iomem: fde00000-fde0ffff : 0000:03:00.0
/proc/iomem: fdff8000-fdffbfff : 0000:00:1b.0
/proc/iomem: fdffd000-fdffd0ff : 0000:00:1f.3
/proc/iomem: fdffe000-fdffe3ff : 0000:00:1d.7
/proc/iomem: fdffe000-fdffe3ff : ehci_hcd
/proc/iomem: fdfff000-fdfff3ff : 0000:00:1a.7
/proc/iomem: fdfff000-fdfff3ff : ehci_hcd
/proc/iomem: fed00000-fed003ff : HPET 0
/proc/interrupts: CPU0
/proc/interrupts: 0: 112 IO-APIC-edge timer
/proc/interrupts: 1: 2 IO-APIC-edge i8042
/proc/interrupts: 9: 0 IO-APIC-fasteoi acpi
/proc/interrupts: 14: 130729 IO-APIC-edge libata
/proc/interrupts: 15: 160 IO-APIC-edge libata
/proc/interrupts: 16: 0 IO-APIC-fasteoi uhci_hcd:usb1
/proc/interrupts: 17: 461 IO-APIC-fasteoi ide0
/proc/interrupts: 18: 263 IO-APIC-fasteoi uhci_hcd:usb2
/proc/interrupts: 19: 3339 IO-APIC-fasteoi uhci_hcd:usb3, uhci_hcd:usb5, libata
/proc/interrupts: 20: 0 IO-APIC-fasteoi uhci_hcd:usb4, ehci_hcd:usb8
/proc/interrupts: 21: 2 IO-APIC-fasteoi uhci_hcd:usb6, ehci_hcd:usb7
/proc/interrupts: 22: 535609 IO-APIC-fasteoi eth0
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 597444
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 906588 kB
/proc/meminfo: MemFree: 24460 kB
/proc/meminfo: Buffers: 70196 kB
/proc/meminfo: Cached: 750192 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 275872 kB
/proc/meminfo: Inactive: 551916 kB
/proc/meminfo: SwapTotal: 2650684 kB
/proc/meminfo: SwapFree: 2650260 kB
/proc/meminfo: Dirty: 1072 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 7436 kB
/proc/meminfo: Mapped: 1888 kB
/proc/meminfo: Slab: 43552 kB
/proc/meminfo: SReclaimable: 32532 kB
/proc/meminfo: SUnreclaim: 11020 kB
/proc/meminfo: PageTables: 224 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 3103976 kB
/proc/meminfo: Committed_AS: 11140 kB
/proc/meminfo: VmallocTotal: 122576 kB
/proc/meminfo: VmallocUsed: 8696 kB
/proc/meminfo: VmallocChunk: 112860 kB
/proc/bus/input/devices: I: Bus=0003 Vendor=03f9 Product=0100 Version=0110
/proc/bus/input/devices: N: Name="Key Tronic Keytronic USB Keyboard"
/proc/bus/input/devices: P: Phys=usb-0000:00:1a.1-1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=10000 7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 65: dmidecode: not found
==============================================
Installer status:
==============================================
Package: kernel-image-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: preseed-common
Status: install ok unpacked
Version: 1.30
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.06
Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.51)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.40
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 1000
Package: acpi-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: acpi-modules
Depends: kernel-image-2.6.21-2-486-di
Description: ACPI support modules
Package: cdrom-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: cdrom-modules
Depends: ide-modules-2.6.21-2-486-di, cdrom-core-modules-2.6.21-2-486-di, kernel-image-2.6.21-2-486-di
Description: Esoteric CDROM drivers
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.6-2
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.12
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 94000
Package: lowmemcheck
Status: install ok unpacked
Version: 1.26
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.15
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.20
Depends: libc6 (>= 2.5-5), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.51), cdebconf-udeb
Description: Debian installer main menu
Package: ide-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: ide-modules
Depends: kernel-image-2.6.21-2-486-di, ide-core-modules-2.6.21-2-486-di
Description: IDE drivers
Package: di-utils-shell
Status: install ok unpacked
Version: 1.49
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 95000
Package: di-utils
Status: install ok installed
Version: 1.49
Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.52), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: fat-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: fat-modules
Depends: kernel-image-2.6.21-2-486-di
Description: FAT filesystem support
Package: ide-core-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: ide-core-modules
Depends: kernel-image-2.6.21-2-486-di
Description: IDE support
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.119
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.5-5), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre11-4
Depends: libc6 (>= 2.5-5)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.54
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: sata-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: sata-modules
Depends: kernel-image-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di, ata-modules-2.6.21-2-486-di
Description: SATA drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.105-4
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: scsi-common-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: scsi-common-modules
Depends: kernel-image-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di, cdrom-core-modules-2.6.21-2-486-di
Description: Very common SCSI drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7.1
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 1.1
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 1900
Package: floppy-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: floppy-modules
Depends: kernel-image-2.6.21-2-486-di
Description: Floppy driver
Package: input-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: input-modules
Depends: kernel-image-2.6.21-2-486-di, usb-modules-2.6.21-2-486-di
Description: Input devices support
Package: rescue-check
Status: install ok unpacked
Version: 1.11
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.6-2
Provides: editor
Depends: libc6 (>= 2.5-5), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: usb-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: usb-modules
Depends: kernel-image-2.6.21-2-486-di
Description: USB support
Package: cdebconf-udeb
Status: install ok installed
Version: 0.119
Provides: debconf-2.0
Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.52), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 1.1
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 2200
Package: load-cdrom
Status: install ok installed
Version: 1.15
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 1600
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.119
Depends: cdebconf-udeb, libc6 (>= 2.5-5)
Description: Plain text frontend for Debian Configuration Management System
Package: iso-3166-udeb
Status: install ok installed
Version: 1.2-1
Description: provides iso_3166.tab file
Package: firewire-core-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.21-2-486-di, kernel-image-2.6.21-2-486-di
Description: Core FireWire drivers
Package: core-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: core-modules
Depends: kernel-image-2.6.21-2-486-di
Description: Core modules
Package: floppy-retriever
Status: install ok unpacked
Version: 1.15
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.54
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 1700
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-5
Depends: libc6 (>= 2.5-5)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.30
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: ata-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: ata-modules
Depends: kernel-image-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di
Description: ATA disk modules.
Package: libiw29-udeb
Status: install ok installed
Version: 29~pre22-1
Depends: libc6 (>= 2.5-5)
Description: Tools for manipulating Linux Wireless Extensions
Package: archdetect
Status: install ok installed
Version: 1.54
Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.52)
Description: Hardware architecture detector
Package: scsi-core-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: scsi-core-modules
Depends: kernel-image-2.6.21-2-486-di
Description: Core SCSI subsystem
Package: save-logs
Status: install ok unpacked
Version: 2.31
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 94000
Package: scsi-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: scsi-modules
Depends: kernel-image-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di, parport-modules-2.6.21-2-486-di, cdrom-core-modules-2.6.21-2-486-di, core-modules-2.6.21-2-486-di
Description: SCSI drivers
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.49
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 99500
Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: fb-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: fb-modules
Depends: kernel-image-2.6.21-2-486-di
Description: Frame buffer support
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-2+b1
Depends: libc6 (>= 2.5-5)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4-1
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.02-2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.49
Description: Terminfo entries needed by newt/slang in debian installer
Package: usb-serial-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: usb-serial-modules
Depends: kernel-image-2.6.21-2-486-di, usb-modules-2.6.21-2-486-di
Description: USB serial drivers
Package: pcmcia-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: pcmcia-modules
Depends: kernel-image-2.6.21-2-486-di, core-modules-2.6.21-2-486-di
Description: Common PCMCIA drivers
Package: hw-detect
Status: install ok installed
Version: 1.54
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.48)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.35
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.51), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 1200
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.52
Depends: libc6 (>= 2.5-5)
Description: Library of common debian-installer functions
Package: parport-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: parport-modules
Depends: kernel-image-2.6.21-2-486-di
Description: Parallel port support
Package: installation-locale
Status: install ok unpacked
Version: 1.2
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.30
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.12
Depends: cdebconf-udeb, di-utils (>= 1.48)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.119
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 93000
Package: netcfg
Status: install ok installed
Version: 1.38
Provides: configured-network
Depends: libc6 (>= 2.5-5), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.52), libiw29-udeb (>= 28+29pre7), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 1800
Package: file-preseed
Status: install ok unpacked
Version: 1.30
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 1400
Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3.3.dfsg-5
Description: compression library - runtime for Debian installer
Package: serial-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: serial-modules
Depends: kernel-image-2.6.21-2-486-di, pcmcia-modules-2.6.21-2-486-di
Description: Serial drivers
Package: usb-storage-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di, usb-modules-2.6.21-2-486-di
Description: USB storage support
Package: pcmcia-storage-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.21-2-486-di, ide-core-modules-2.6.21-2-486-di, cdrom-core-modules-2.6.21-2-486-di, pcmcia-modules-2.6.21-2-486-di, ata-modules-2.6.21-2-486-di
Description: PCMCIA storage drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.119
Depends: libc6 (>= 2.5-5), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: cdrom-detect
Status: install ok installed
Version: 1.24
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.48)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 1300
Package: cdrom-core-modules-2.6.21-2-486-di
Status: install ok unpacked
Version: 1.53
Provides: cdrom-core-modules
Depends: kernel-image-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di, ide-modules-2.6.21-2-486-di
Description: CDROM support
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20070718-19:05
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.23
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.23
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.23
Depends: apt-mirror-setup, installed-base, cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 7000
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.82
Depends: mounted-partitions, created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.48), rootskel (>= 1.19)
Description: base system installation framework
Package: bootstrap-base
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 488
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.82
Depends: libc6 (>= 2.5-5), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.52), base-installer, debootstrap-udeb (>= 0.3.1), gpgv-udeb, debian-archive-keyring-udeb
Provides: kernel-installer, installed-base
Description: Install the base system
Installer-Menu-Item: 6500
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.17
Depends: libc6 (>= 2.6-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.52), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.16
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 6200
Package: crc-modules-2.6.21-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debian-archive-keyring-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 28
Maintainer: Michael Vogt <mvo@debian.org>
Version: 2007.02.19-0.1
Recommends: gpgv-udeb
Description: GnuPG keys of the Debian archive
The Debian project digitally signs its Release files. This package
contains the archive keys used for that, in a minimal form for use
in the installer.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.0.0
Depends: libc6 (>= 2.5-5), mounted-partitions
Description: Bootstrap the Debian system
Package: dhcp-client-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 104
Maintainer: Andreas Barth <aba@not.so.argh.org>
Version: 2.0pl5dfsg1-20
Depends: libc6 (>= 2.5-5)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 4
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.49
Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.52)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.54
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 3500
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 396
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.40.2-1
Depends: libblkid1-udeb, libc6 (>= 2.5-5)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: efi-modules-2.6.21-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di
Provides: efi-modules
Description: EFI modules
This package contains EFI modules.
Package: eject-udeb
Status: install ok unpacked
Priority: optional
Section: debian-installer
Installed-Size: 212
Maintainer: Frank Lichtenheld <djpig@debian.org>
Version: 2.1.5-3
Depends: libc6 (>= 2.5-5), cdebconf-udeb
Description: ejects CDs from d-i menu
Installer-Menu-Item: 96000
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules
Provides: bootable-system
Description: Install elilo on a hard disk
Installer-Menu-Item: 7600
Package: ext3-modules-2.6.21-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 244
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-19
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.12
Depends: cdebconf-udeb, archdetect, installed-base, created-fstab, bootable-system
Description: Finish the installation and reboot
Installer-Menu-Item: 7800
Package: gpgv-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.6-2
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG's signature verification tool, gpgv, packaged in minimal
form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 352
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.25
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, partman-utils
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 7300
Package: jfs-modules-2.6.21-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.40.2-1
Depends: libc6 (>= 2.5-5)
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1804
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.6-2
Provides: libc6, libc-udeb, glibc-2.6-1
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.20-2
Depends: libc6 (>= 2.5-5)
Provides: libdevmapper1.02.1
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 20
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.40.2-1
Depends: libc6 (>= 2.5-5)
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.23
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 7500
Package: loop-modules-2.6.21-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 460
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.26-1
Depends: libc6 (>= 2.5-5), libdevmapper1.02.1-udeb
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.21-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 460
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 160
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.6.2-2
Depends: libc6 (>= 2.5-5)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-6
Depends: libc6 (>= 2.6-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.30
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 2100
Package: nic-extra-modules-2.6.21-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2916
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di, nic-shared-modules-2.6.21-2-486-di, core-modules-2.6.21-2-486-di, crc-modules-2.6.21-2-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.21-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 460
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di, nic-shared-modules-2.6.21-2-486-di, core-modules-2.6.21-2-486-di, firewire-core-modules-2.6.21-2-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.21-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 588
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di, nic-shared-modules-2.6.21-2-486-di, nic-wireless-modules-2.6.21-2-486-di, pcmcia-modules-2.6.21-2-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.21-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 56
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, nic-pcmcia-modules, and nic-wireless-modules.
Package: nic-usb-modules-2.6.21-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 316
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di, nic-shared-modules-2.6.21-2-486-di, nic-wireless-modules-2.6.21-2-486-di, usb-modules-2.6.21-2-486-di, core-modules-2.6.21-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nic-wireless-modules-2.6.21-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 836
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di, nic-shared-modules-2.6.21-2-486-di, core-modules-2.6.21-2-486-di
Provides: nic-wireless-modules
Description: Wireless NIC drivers
This package contains wireless NIC drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, installed-base, di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 7700
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6+b2
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.24
Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.52), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 388
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 69
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 23
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 69), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 764
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 109
Depends: libc6 (>= 2.5-5), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-utils, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 4200
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 604
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 55
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 884
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: partman-base (>= 106), libc6 (>= 2.5-5), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base, efi-modules
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 54
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 36
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 300
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 51
Depends: e2fsprogs-udeb, ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 36
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 51
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-utils
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 8
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 109
Depends: libc6 (>= 2.5-5), libparted1.7-udeb (>= 1.7.1-1)
Description: Utilities related to partitioning
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pata-modules-2.6.21-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 176
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di, ata-modules-2.6.21-2-486-di
Provides: pata-modules
Description: PATA drivers
This package contains PATA drivers for the Linux kernel.
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.14
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 7000
Package: reiserfs-modules-2.6.21-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.21-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1784
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: scsi-modules-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.17
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 6200
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 328
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 6300
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 29~pre22-1
Depends: libc6 (>= 2.5-5), libiw29-udeb (>= 28+29pre7)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.21-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 580
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 240
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.9.0-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.21-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.21-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.53
Depends: kernel-image-2.6.21-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.21-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Reply to: