[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#421217: marked as done (installation report)

Your message dated Tue, 08 May 2007 23:22:59 +0200
with message-id <0JHQ008X9REBLE@psmtp09.wxs.nl>
and subject line Bug#421217: installation report
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: kernel-image-2.68-3-386

Debian-installer-version: < kernel-image-2.68-3-386>
uname -a: <Linux ubuntu 2.6.15-23-386 #1 PREEMPT Tue May 23 13:49:40
UTC 2006 i686 GNU/Linux



Date: <2007-27-04>
Method: <debootstrap>
Machine: <Description of machine (eg, IBM Thinkpad R32)>
Processor:
Memory:
Root Device: <SATA>
Root Size/partition table:
<
   Disk /dev/sda: 160.0 GB, 160041885696 bytes
   255 heads, 63 sectors/track, 19457 cylinders
   Units = cylinders of 16065 * 512 = 8225280 bytes

      Device Boot      Start         End      Blocks   Id  System
   /dev/sda1               1         996     8000338+  83  Linux
   /dev/sda2   *         997        2241    10000462+   c  W95 FAT32 (LBA)
   /dev/sda3            2242       19457   138287520    f  W95 Ext'd (LBA)
   /dev/sda5            2242        2365      995998+  82  Linux swap / Solaris
   /dev/sda6            2366        4232    14996646   83  Linux
   /dev/sda7            4233       19457   122294781    7  HPFS/NTFS



Output of lspci and lspci -n:

$lspci
pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 RAM memory: nVidia Corporation: Unknown device 0369 (rev a1)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 0360 (rev a2)
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 0368 (rev a2)
0000:00:01.2 RAM memory: nVidia Corporation: Unknown device 036a (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 036c (rev a1)
0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 036d (rev a2)
0000:00:04.0 IDE interface: nVidia Corporation: Unknown device 036e (rev a1)
0000:00:05.0 IDE interface: nVidia Corporation: Unknown device 037f (rev a2)
0000:00:05.1 IDE interface: nVidia Corporation: Unknown device 037f (rev a2)
0000:00:05.2 IDE interface: nVidia Corporation: Unknown device 037f (rev a2)
0000:00:06.0 PCI bridge: nVidia Corporation: Unknown device 0370 (rev a2)
0000:00:06.1 0403: nVidia Corporation: Unknown device 0371 (rev a2)
0000:00:08.0 Bridge: nVidia Corporation: Unknown device 0373 (rev a2)
0000:00:0a.0 PCI bridge: nVidia Corporation: Unknown device 0376 (rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 0374 (rev a2)
0000:00:0c.0 PCI bridge: nVidia Corporation: Unknown device 0374 (rev a2)
0000:00:0d.0 PCI bridge: nVidia Corporation: Unknown device 0378 (rev a2)
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 0375 (rev a2)
0000:00:0f.0 PCI bridge: nVidia Corporation: Unknown device 0377 (rev a2)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:07:00.0 VGA compatible controller: nVidia Corporation: Unknown
device 0393 (rev a1)


$lspci -n
pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 0500: 10de:0369 (rev a1)
0000:00:01.0 0601: 10de:0360 (rev a2)
0000:00:01.1 0c05: 10de:0368 (rev a2)
0000:00:01.2 0500: 10de:036a (rev a2)
0000:00:02.0 0c03: 10de:036c (rev a1)
0000:00:02.1 0c03: 10de:036d (rev a2)
0000:00:04.0 0101: 10de:036e (rev a1)
0000:00:05.0 0101: 10de:037f (rev a2)
0000:00:05.1 0101: 10de:037f (rev a2)
0000:00:05.2 0101: 10de:037f (rev a2)
0000:00:06.0 0604: 10de:0370 (rev a2)
0000:00:06.1 0403: 10de:0371 (rev a2)
0000:00:08.0 0680: 10de:0373 (rev a2)
0000:00:0a.0 0604: 10de:0376 (rev a2)
0000:00:0b.0 0604: 10de:0374 (rev a2)
0000:00:0c.0 0604: 10de:0374 (rev a2)
0000:00:0d.0 0604: 10de:0378 (rev a2)
0000:00:0e.0 0604: 10de:0375 (rev a2)
0000:00:0f.0 0604: 10de:0377 (rev a2)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:06.0 0200: 10ec:8139 (rev 10)
0000:07:00.0 0300: 10de:0393 (rev a1)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [ ]
Configure network HW:   [ ]
Config network:         [ ]
Detect CD:              [ ]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Create file systems:    [ ]
Mount partitions:       [ ]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]

Comments/Problems:


mkfs.ext3 /dev/sda1
mount /dev/sda1 /mnt

apt-get install debootstrap
debootstrap --arch i386 sarge /mnt http://debian.cn99.com/debian

chroot /mnt /bin/bash

mount -t proc proc /proc
vi /etc/apt/source.list
apt-get update
apt-get locales
apt-get upgrade
apt-get kernel-image-2.6.8-3-386 -y

perl: warning: Falling back to the standard locale ("C").
/usr/sbin/mkinitrd: device /dev/sda1 is not a block device
Failed to create initrd image.
dpkg: error processing kernel-image-2.6.8-3-386 (--configure):
subprocess post-installation script returned error exit status 9
Errors were encountered while processing:
kernel-image-2.6.8-3-386
E: Sub-process /usr/bin/dpkg returned an error code (1)


$ls /dev
MAKEDEV   core     loop0  mem     midi3       port   ram11  ram4
rmidi1     smpte3
agpgart   dsp      loop1  midi0   mixer       ppp    ram12  ram5
rmidi2     sndstat
audio     dsp1     loop2  midi00  mixer1      ptmx   ram13  ram6
rmidi3     tty
audio1    dsp2     loop3  midi01  mixer2      pts    ram14  ram7
sequencer  tty0
audio2    dsp3     loop4  midi02  mixer3      ram    ram15  ram8
shm        urandom
audio3    full     loop5  midi03  mpu401data  ram0   ram16  ram9
smpte0     xconsole
audioctl  initctl  loop6  midi1   mpu401stat  ram1   ram2   random
smpte1     zero
console   kmem     loop7  midi2   null        ram10  ram3   rmidi0  smpte2

not sda

$dmesg | grep sda
[4294674.290000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[4294674.290000] SCSI device sda: drive cache: write back
[4294674.291000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[4294674.292000] SCSI device sda: drive cache: write back
[4294674.292000]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[4294674.357000] sd 0:0:0:0: Attached scsi disk sda
[4294736.378000] Adding 995988k swap on /dev/sda5.  Priority:-1
extents:1 across:995988k
[4294884.280000] EXT3 FS on sda1, internal journal


<Description of the install, in prose, and any thoughts, comments
     and ideas you had during the initial install.>

--
Sarge lilo

--- End Message ---
--- Begin Message --- 
> /usr/sbin/mkinitrd: device /dev/sda1 is not a block device
> Failed to create initrd image.

It looks like the Sarge kernel does not support your system. Please try the
Etch installer instead [1].

I'm closing this report. Feel free to file a new installation report after
trying the Etch installer.

Cheers,
FJP

[1] http://www.debian.org/releases/etch/debian-installer

--- End Message ---
Reply to: