Bug#415346: marked as done ()
Your message dated Sun, 18 Mar 2007 19:35:48 +0100
with message-id <20070318183548.GA6765@gpm.stappers.nl>
and subject line Bug#415346: succesfull install (now closed)
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: installation-reports
INSTALL REPORT
Debian-installer-version: <Fill in date and from where you got the image>
uname -a: Linux zeus 2.6.8-3-386 #1 Wed Dec 6 00:38:53 UTC 2006 i586 GNU/Linux
Date: Sat, 17 Mar 2007 15:16:04 +0100
Method: Installed using the Debian GNU/Linux 3.1r5 netinst CD
Machine: Old AMD-K6 that serves as a small mailserver
Processor: AMD K6-2, 400MHz
Memory: 512 MB SDRAM
Root Device: IDE
Root Size/partition table:
zeus:~# fdisk -l /dev/hda
Disk /dev/hda: 10.1 GB, 10141286400 bytes
255 heads, 63 sectors/track, 1232 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 122 979933+ 83 Linux
/dev/hda2 123 184 498015 82 Linux swap / Solaris
/dev/hda3 185 215 249007+ 83 Linux
/dev/hda4 216 1232 8169052+ 5 Extended
/dev/hda5 216 458 1951866 fd Linux raid autodetect
/dev/hda6 459 1232 6217123+ fd Linux raid autodetect
zeus:~# mount | grep "^/dev/[hda|md?]"
/dev/hda1 on / type ext3 (rw,noatime,errors=remount-ro)
/dev/hda3 on /tmp type ext3 (rw,nodev,noatime)
/dev/md5 on /var type ext3 (rw,nodev,noatime)
/dev/md6 on /var/qmail type ext3 (rw,noatime)
Output of lspci and lspci -n:
zeus:~# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:
07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
0000:00:14.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 3a)
zeus:~# lspci -n
0000:00:00.0 0600: 1106:0598 (rev 04)
0000:00:01.0 0604: 1106:8598
0000:00:07.0 0601: 1106:0586 (rev 47)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.3 0600: 1106:3040 (rev 10)
0000:00:14.0 0200: 10ec:8139 (rev 10)
0000:01:00.0 0300: 1002:475a (rev 3a)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Smooth & Easy. Absolutely no problems.
--- End Message ---
--- Begin Message ---
Op 18-03-2007 om 18:24 schreef David Maus:
> Package: installation-reports
>
> Comments/Problems:
>
> Smooth & Easy. Absolutely no problems.
(c:
Thanks for the feedback.
Have fun with your Debian GNU/Linux computer system.
Cheers
Geert Stappers
--- End Message ---
Reply to: