Bug#415346:
Package: installation-reports
INSTALL REPORT
Debian-installer-version: <Fill in date and from where you got the image>
uname -a: Linux zeus 2.6.8-3-386 #1 Wed Dec 6 00:38:53 UTC 2006 i586 GNU/Linux
Date: Sat, 17 Mar 2007 15:16:04 +0100
Method: Installed using the Debian GNU/Linux 3.1r5 netinst CD
Machine: Old AMD-K6 that serves as a small mailserver
Processor: AMD K6-2, 400MHz
Memory: 512 MB SDRAM
Root Device: IDE
Root Size/partition table:
zeus:~# fdisk -l /dev/hda
Disk /dev/hda: 10.1 GB, 10141286400 bytes
255 heads, 63 sectors/track, 1232 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 122 979933+ 83 Linux
/dev/hda2 123 184 498015 82 Linux swap / Solaris
/dev/hda3 185 215 249007+ 83 Linux
/dev/hda4 216 1232 8169052+ 5 Extended
/dev/hda5 216 458 1951866 fd Linux raid autodetect
/dev/hda6 459 1232 6217123+ fd Linux raid autodetect
zeus:~# mount | grep "^/dev/[hda|md?]"
/dev/hda1 on / type ext3 (rw,noatime,errors=remount-ro)
/dev/hda3 on /tmp type ext3 (rw,nodev,noatime)
/dev/md5 on /var type ext3 (rw,nodev,noatime)
/dev/md6 on /var/qmail type ext3 (rw,noatime)
Output of lspci and lspci -n:
zeus:~# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:
07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
0000:00:14.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 3a)
zeus:~# lspci -n
0000:00:00.0 0600: 1106:0598 (rev 04)
0000:00:01.0 0604: 1106:8598
0000:00:07.0 0601: 1106:0586 (rev 47)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.3 0600: 1106:3040 (rev 10)
0000:00:14.0 0200: 10ec:8139 (rev 10)
0000:01:00.0 0300: 1002:475a (rev 3a)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Smooth & Easy. Absolutely no problems.
Reply to: