Bug#411319: Hang at "Creating device files"
Hi
Sounds very strange that I'd get the same error on two
different images burned to two different discs, but I
ran the CD check anyway and it too says the CD is
perfectly OK. I haven't had any hardware trouble with
the burner before, and it seems unlikely that I'd
error out on the same place over a random HW issue.
The kernel somehow managing to put it in an invalid
state?
Anyway, just looking at the log is this normal for a
DVD-burner ND-3550 IDE Black OEM?:
Mar 2 04:10:36 kernel: hde: Optiarc DVD RW AD-5170A,
ATAPI CD/DVD-ROM drive
Mar 2 04:10:36 kernel: ide2 at 0xaf00-0xaf07,0xae02
on irq 177
Mar 2 04:10:36 kernel: Probing IDE interface ide3...
Mar 2 04:10:36 kernel: ACPI: PCI Interrupt
0000:07:02.0[A] -> GSI 17 (level, low) -> IRQ 193
Mar 2 04:10:36 kernel: PCI: Setting latency timer of
device 0000:07:02.0 to 64
Mar 2 04:10:36 kernel: ohci1394: fw-host0: OHCI-1394
1.1 (PCI): IRQ=[193] MMIO=[fd6ff000-fd6ff7ff] Max
Packet=[2048] IR/IT contexts=[4/8]
Mar 2 04:10:36 kernel: hde: ATAPI 48X DVD-ROM DVD-R
CD-R/RW drive, 2048kB Cache
--- David Härdeman <david@hardeman.nu> skrev:
> On Wed, February 21, 2007 12:17, Kjell Rune Skaaraas
> said:
> > now I also
> > tried to do another install using the daily image:
> > ...
> > (Date: Feb 20th). Verified MD5 sum, wrote to CD
> with
> > verification, same hang on 73%, downloading
> cryptsetup
> > and dmcrypt. Also made another non-crypto install,
> > works fine. AFAIK these should be be on the CD
> anyway,
> > certainly the full CD1 image I downloaded last
> time.
>
> Actually, the problem seems to lie with the CD image
> (or hardware, or the
> kernel):
>
> Feb 20 16:17:49 base-installer: Using CD-ROM mount
> point /cdrom/
> Feb 20 16:17:49 base-installer: Identifying..
> Feb 20 16:17:55 kernel: hde: media error (bad
> sector): status=0x51 {
> DriveReady SeekComplete Error }
> Feb 20 16:17:55 kernel: hde: media error (bad
> sector): error=0x34 {
> AbortedCommand LastFailedSense=0x03 }
> Feb 20 16:17:55 kernel: ide: failed opcode was:
> unknown
> Feb 20 16:17:55 base-installer:
> [0f1385d5d0dc8ba1136499f487017f72-2]
> Feb 20 16:17:55 base-installer: Scanning disc for
> index files..
> Feb 20 16:17:55 kernel: ATAPI device hde:
> Feb 20 16:17:55 kernel: Error: Medium error --
> (Sense key=0x03)
> Feb 20 16:17:55 kernel: (reserved error code) --
> (asc=0x02, ascq=0x00)
> Feb 20 16:17:55 kernel: The failed "Read 10"
> packet command was:
> Feb 20 16:17:55 kernel: "28 00 00 00 00 39 00 00
> 01 00 00 00 00 00 00 00 "
> Feb 20 16:17:55 kernel: end_request: I/O error, dev
> hde, sector 22
>
> then a few lines later it tries to install
> cryptsetup...and hangs (most
> probably due to read errors), the last few lines
> from "ps ax" are:
>
> 7745 root 528 S /bin/sh /bin/apt-install
> cryptsetup
> 7792 root 480 S log-output -t apt-install chroot
> /target apt-get -y -
> 7793 root 2400 R apt-get -y --no-remove install
> cryptsetup
> 7795 root 1424 S /usr/lib/apt/methods/cdrom
> 7931 root 352 S nc -p 80 -l -e /usr/bin/httpd
> 7964 root 520 R ps awxxx
>
> The last two processes are from the debugging, but
> process 7795 suggests
> that apt is trying to get the package from the
> CD-ROM.
>
> What is the result if you run the "Check the
> CD-ROM(s) integrity" command
> from the d-i main menu?
>
> > I also verified from the console that wget works,
> so
> > even if it tried using a Debian mirror, it should
> > still work.
>
> Ok, but it seems that it tries the CD-ROM first (and
> fails) meaning it
> never gets to that...
>
> --
> David Härdeman
>
>
_________________________________________________________
Alt i én. Få Yahoo! Mail med adressekartotek, kalender og
notisblokk. http://no.mail.yahoo.com
Reply to: