--- Begin Message ---
Package: installation-reports
Version: 2.23
Severity: normal
Generally a good installation. I decided to try the daily image to help
QA the d-i while I developed a preseed file to automate new
installations. One interesting issue was found.
In the middle of the installation the installation failed (red
background screen) with a printer configuration failed message. I do
not have a printer attached to the machine. I think a lot of machines
will be without a printer attached. I think this would have confused
many people.
Continuing through this error led into what I think is the expert dialog
where I think the software installation step was offered again by
default as a repeat but this time it was successful without a printer
failure. The rest of the configuration was okay.
-- Package-specific info:
Boot method: CD
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-businesscard.iso BC Binary-1 20070115-23:09
Date: downloaded file timestamp 2007-01-16 05:33:00 UTC
cat .disk/info
Debian GNU/Linux testing "Etch" - Official Snapshot amd64 BC Binary-1 20070115-23:09
Machine: debranded HP mini-tower Dual Pentium D 920 1G ram 160G SATA
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda1 ext3 150877984 2589188 140624588 2% /
tmpfs tmpfs 513796 0 513796 0% /lib/init/rw
udev tmpfs 10240 56 10184 1% /dev
tmpfs tmpfs 513796 0 513796 0% /dev/shm
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [E]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Printer configuration failed, as noted above. No printer attached and
while I would not expect it to succeed I also would not expect it to
fail either.
I ran the d-i with a DHCP server that supplied a preseed.cfg file. I
do not think any of the values there are relevant but am including the
preseed.cfg file at the end of this report just to be safe.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070115-10:52)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux grief 2.6.18-3-amd64 #1 SMP Sun Dec 10 19:57:44 CET 2006 x86_64 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 81)
lspci -nn: 00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 81)
lspci -nn: 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01)
lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01)
lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01)
lspci -nn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01)
lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
lspci -nn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE [8086:27c0] (rev 01)
lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
lspci -nn: 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 SE TurboCache (TM)] [10de:0162] (rev a1)
lspci -nn: 02:01.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev 80)
lspci -nn: 02:05.0 Ethernet controller [0200]: D-Link System Inc RTL8139 Ethernet [1186:1300] (rev 10)
lspci -nn: 02:08.0 Ethernet controller [0200]: Intel Corporation 82801G (ICH7 Family) LAN Controller [8086:27dc] (rev 01)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 81)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:2a22]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Capabilities: [e0] Vendor Specific Information
lspci -vnn:
lspci -vnn: 00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 81)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
lspci -vnn: I/O behind bridge: 0000d000-0000dfff
lspci -vnn: Memory behind bridge: fa000000-fcffffff
lspci -vnn: Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
lspci -vnn: Capabilities: [88] Subsystem: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn: Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [a0] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn: Capabilities: [140] Unknown (5)
lspci -vnn:
lspci -vnn: 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:2a23]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 3
lspci -vnn: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
lspci -vnn: Capabilities: [70] Express Unknown type IRQ 0
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn: Capabilities: [130] Unknown (5)
lspci -vnn:
lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:2a22]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 193
lspci -vnn: I/O ports at ff00 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:2a22]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 201
lspci -vnn: I/O ports at fe00 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:2a22]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 209
lspci -vnn: I/O ports at fd00 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:2a22]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -vnn: I/O ports at fc00 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:2a22]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 193
lspci -vnn: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
lspci -vnn: I/O behind bridge: 0000e000-0000efff
lspci -vnn: Memory behind bridge: fdd00000-fddfffff
lspci -vnn: Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
lspci -vnn: Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device [103c:2a22]
lspci -vnn:
lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:2a22]
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn: Capabilities: [e0] Vendor Specific Information
lspci -vnn:
lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:2a22]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 209
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at fb00 [size=16]
lspci -vnn:
lspci -vnn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:2a22]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 201
lspci -vnn: I/O ports at fa00 [size=8]
lspci -vnn: I/O ports at f900 [size=4]
lspci -vnn: I/O ports at f800 [size=8]
lspci -vnn: I/O ports at f700 [size=4]
lspci -vnn: I/O ports at f600 [size=16]
lspci -vnn: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: Capabilities: [70] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:2a22]
lspci -vnn: Flags: medium devsel, IRQ 255
lspci -vnn: I/O ports at 0500 [size=32]
lspci -vnn:
lspci -vnn: 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 SE TurboCache (TM)] [10de:0162] (rev a1)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:0345]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 3
lspci -vnn: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: Memory at e0000000 (64-bit, prefetchable) [size=256M]
lspci -vnn: Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
lspci -vnn: Expansion ROM at fcfe0000 [disabled] [size=128K]
lspci -vnn: Capabilities: [60] Power Management version 2
lspci -vnn: Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
lspci -vnn: Capabilities: [78] Express Endpoint IRQ 0
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn: Capabilities: [128] Power Budgeting
lspci -vnn:
lspci -vnn: 02:01.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev 80) (prog-if 10)
lspci -vnn: Subsystem: Unknown device [0003:000f]
lspci -vnn: Flags: bus master, stepping, medium devsel, latency 32, IRQ 217
lspci -vnn: Memory at fddff000 (32-bit, non-prefetchable) [size=2K]
lspci -vnn: I/O ports at ef00 [size=128]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn:
lspci -vnn: 02:05.0 Ethernet controller [0200]: D-Link System Inc RTL8139 Ethernet [1186:1300] (rev 10)
lspci -vnn: Subsystem: D-Link System Inc Unknown device [1186:1301]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 225
lspci -vnn: I/O ports at ec00 [size=256]
lspci -vnn: Memory at fddfe000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn:
lspci -vnn: 02:08.0 Ethernet controller [0200]: Intel Corporation 82801G (ICH7 Family) LAN Controller [8086:27dc] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:2a22]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 217
lspci -vnn: Memory at fddfd000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: I/O ports at ee00 [size=64]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
modulemap: 8086:27c8 uhci_hcd
modulemap: 8086:27c9 uhci_hcd
modulemap: 8086:27ca uhci_hcd
modulemap: 8086:27cb uhci_hcd
modulemap: 8086:27cc ehci_hcd
modulemap: 8086:27df piix
modulemap: 8086:27c0 ata_piix
modulemap: 1106:3044 ohci1394
modulemap: 1186:1300 8139too
modulemap: 8086:27dc e100
lsmod: Module Size Used by
lsmod: qnx4 16840 0
lsmod: ntfs 190728 0
lsmod: xfs 485192 0
lsmod: reiserfs 231168 0
lsmod: jfs 166992 0
lsmod: ext3 138256 1
lsmod: jbd 65392 1 ext3
lsmod: mbcache 14216 1 ext3
lsmod: vfat 17792 0
lsmod: fat 55984 1 vfat
lsmod: 8139too 33408 0
lsmod: e100 41616 0
lsmod: mii 10368 2 8139too,e100
lsmod: eth1394 24840 0
lsmod: nls_iso8859_1 9472 0
lsmod: sbp2 28296 0
lsmod: isofs 39396 0
lsmod: ide_disk 20352 0
lsmod: ide_generic 5632 0 [permanent]
lsmod: triflex 8448 0 [permanent]
lsmod: cy82c693 9096 0 [permanent]
lsmod: cmd64x 15308 0 [permanent]
lsmod: it821x 12932 0 [permanent]
lsmod: slc90e66 10112 0 [permanent]
lsmod: via82cxxx 13188 0 [permanent]
lsmod: ns87415 8904 0 [permanent]
lsmod: siimage 16640 0 [permanent]
lsmod: sis5513 18192 0 [permanent]
lsmod: alim15x3 16152 0 [permanent]
lsmod: pdc202xx_old 14848 0 [permanent]
lsmod: cs5530 9984 0 [permanent]
lsmod: amd74xx 19248 0 [permanent]
lsmod: serverworks 13456 0 [permanent]
lsmod: opti621 9220 0 [permanent]
lsmod: trm290 8836 0 [permanent]
lsmod: rz1000 7296 0 [permanent]
lsmod: cs5520 9472 0 [permanent]
lsmod: hpt34x 9856 0 [permanent]
lsmod: sc1200 11520 0 [permanent]
lsmod: pdc202xx_new 13312 0 [permanent]
lsmod: aec62xx 12288 0 [permanent]
lsmod: atiixp 10768 0 [permanent]
lsmod: usb_storage 86848 0
lsmod: vga16fb 16280 2
lsmod: vgastate 12416 1 vga16fb
lsmod: usbserial 38640 0
lsmod: usbkbd 11776 0
lsmod: thermal 19984 0
lsmod: processor 37608 1 thermal
lsmod: fan 9608 0
lsmod: ide_cd 44704 0
lsmod: cdrom 40104 1 ide_cd
lsmod: sd_mod 25600 3
lsmod: piix 15236 0 [permanent]
lsmod: ohci1394 37704 0
lsmod: ieee1394 361208 3 eth1394,sbp2,ohci1394
lsmod: parport_pc 41256 0
lsmod: parport 44044 1 parport_pc
lsmod: ata_piix 19592 2
lsmod: libata 106272 1 ata_piix
lsmod: scsi_mod 151984 4 sbp2,usb_storage,sd_mod,libata
lsmod: ehci_hcd 35720 0
lsmod: generic 10500 0 [permanent]
lsmod: ide_core 146816 29 ide_disk,ide_generic,triflex,cy82c693,cmd64x,it821x,slc90e66,via82cxxx,ns87415,siimage,sis5513,alim15x3,pdc202xx_old,cs5530,amd74xx,serverworks,opti621,trm290,rz1000,cs5520,hpt34x,sc1200,pdc202xx_new,aec62xx,atiixp,usb_storage,ide_cd,piix,generic
lsmod: uhci_hcd 28176 0
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 513800 412 513388 0% /dev
df: tmpfs 513800 412 513388 0% /dev
df: tmpfs 513800 412 513388 0% /.dev
df: /dev/scsi/host0/bus0/target0/lun0/part1 150877984 2572664 140641112 2% /target
free: total used free shared buffers
free: Mem: 1027600 996780 30820 0 74472
free: Swap: 3004112 408 3003704
free: Total: 4031712 997188 3034524
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 6
/proc/cpuinfo: model name : Intel(R) Pentium(R) D CPU 2.80GHz
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 2800.892
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 0
/proc/cpuinfo: cpu cores : 2
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 6
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips : 5606.85
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 128
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/cpuinfo: processor : 1
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 6
/proc/cpuinfo: model name : Intel(R) Pentium(R) D CPU 2.80GHz
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 2800.892
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 1
/proc/cpuinfo: cpu cores : 2
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 6
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips : 5602.00
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 128
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0070-0077 : rtc
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 0400-0403 : ACPI PM1a_EVT_BLK
/proc/ioports: 0404-0405 : ACPI PM1a_CNT_BLK
/proc/ioports: 0408-040b : ACPI PM_TMR
/proc/ioports: 0428-042f : ACPI GPE0_BLK
/proc/ioports: 0500-051f : 0000:00:1f.3
/proc/ioports: 0778-077a : parport0
/proc/ioports: d000-dfff : PCI Bus #01
/proc/ioports: e000-efff : PCI Bus #02
/proc/ioports: ec00-ecff : 0000:02:05.0
/proc/ioports: ec00-ecff : 8139too
/proc/ioports: ee00-ee3f : 0000:02:08.0
/proc/ioports: ee00-ee3f : e100
/proc/ioports: ef00-ef7f : 0000:02:01.0
/proc/ioports: f600-f60f : 0000:00:1f.2
/proc/ioports: f600-f60f : libata
/proc/ioports: f700-f703 : 0000:00:1f.2
/proc/ioports: f700-f703 : libata
/proc/ioports: f800-f807 : 0000:00:1f.2
/proc/ioports: f800-f807 : libata
/proc/ioports: f900-f903 : 0000:00:1f.2
/proc/ioports: f900-f903 : libata
/proc/ioports: fa00-fa07 : 0000:00:1f.2
/proc/ioports: fa00-fa07 : libata
/proc/ioports: fb00-fb0f : 0000:00:1f.1
/proc/ioports: fb00-fb07 : ide0
/proc/ioports: fc00-fc1f : 0000:00:1d.3
/proc/ioports: fc00-fc1f : uhci_hcd
/proc/ioports: fd00-fd1f : 0000:00:1d.2
/proc/ioports: fd00-fd1f : uhci_hcd
/proc/ioports: fe00-fe1f : 0000:00:1d.1
/proc/ioports: fe00-fe1f : uhci_hcd
/proc/ioports: ff00-ff1f : 0000:00:1d.0
/proc/ioports: ff00-ff1f : uhci_hcd
/proc/iomem: 00000000-0009f3ff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009f400-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cedff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3fedf7ff : System RAM
/proc/iomem: 00200000-003e2542 : Kernel code
/proc/iomem: 003e2543-004ba667 : Kernel data
/proc/iomem: 3fedf800-3fedffff : reserved
/proc/iomem: 3fee0000-3fee2fff : ACPI Non-volatile Storage
/proc/iomem: 3fee3000-3feeffff : ACPI Tables
/proc/iomem: 3fef0000-3fefffff : reserved
/proc/iomem: e0000000-efffffff : PCI Bus #01
/proc/iomem: e0000000-efffffff : 0000:01:00.0
/proc/iomem: f0000000-f3ffffff : reserved
/proc/iomem: fa000000-fcffffff : PCI Bus #01
/proc/iomem: fa000000-faffffff : 0000:01:00.0
/proc/iomem: fb000000-fbffffff : 0000:01:00.0
/proc/iomem: fcfe0000-fcffffff : 0000:01:00.0
/proc/iomem: fdd00000-fddfffff : PCI Bus #02
/proc/iomem: fddfd000-fddfdfff : 0000:02:08.0
/proc/iomem: fddfd000-fddfdfff : e100
/proc/iomem: fddfe000-fddfe0ff : 0000:02:05.0
/proc/iomem: fddfe000-fddfe0ff : 8139too
/proc/iomem: fddff000-fddff7ff : 0000:02:01.0
/proc/iomem: fddff000-fddff7ff : ohci1394
/proc/iomem: fde00000-fdefffff : PCI Bus #02
/proc/iomem: fdff8000-fdffbfff : 0000:00:1b.0
/proc/iomem: fdffe000-fdffe3ff : 0000:00:1f.2
/proc/iomem: fdffe000-fdffe3ff : libata
/proc/iomem: fdfff000-fdfff3ff : 0000:00:1d.7
/proc/iomem: fdfff000-fdfff3ff : ehci_hcd
/proc/iomem: fec00000-ffffffff : reserved
/proc/interrupts: CPU0 CPU1
/proc/interrupts: 0: 9297132 0 IO-APIC-edge timer
/proc/interrupts: 7: 0 0 IO-APIC-edge parport0
/proc/interrupts: 8: 0 0 IO-APIC-edge rtc
/proc/interrupts: 9: 0 0 IO-APIC-level acpi
/proc/interrupts: 14: 923 0 IO-APIC-edge ide0
/proc/interrupts: 169: 0 0 IO-APIC-level uhci_hcd:usb4
/proc/interrupts: 193: 3 0 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb5
/proc/interrupts: 201: 109324 0 IO-APIC-level uhci_hcd:usb2, libata
/proc/interrupts: 209: 0 0 IO-APIC-level uhci_hcd:usb3
/proc/interrupts: 217: 524152 0 IO-APIC-level ohci1394, eth1
/proc/interrupts: NMI: 474 367
/proc/interrupts: LOC: 9297476 9297452
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 1027600 kB
/proc/meminfo: MemFree: 31224 kB
/proc/meminfo: Buffers: 74472 kB
/proc/meminfo: Cached: 788744 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 449296 kB
/proc/meminfo: Inactive: 453572 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 1027600 kB
/proc/meminfo: LowFree: 31224 kB
/proc/meminfo: SwapTotal: 3004112 kB
/proc/meminfo: SwapFree: 3003704 kB
/proc/meminfo: Dirty: 1084 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 39616 kB
/proc/meminfo: Mapped: 2048 kB
/proc/meminfo: Slab: 75180 kB
/proc/meminfo: PageTables: 432 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 3517912 kB
/proc/meminfo: Committed_AS: 45008 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed: 270132 kB
/proc/meminfo: VmallocChunk: 34359468227 kB
/proc/bus/input/devices: I: Bus=0003 Vendor=03f0 Product=0024 Version=0300
/proc/bus/input/devices: N: Name="CHICONY HP Basic USB Keyboard"
/proc/bus/input/devices: P: Phys=/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.4 present.
dmidecode: 53 structures occupying 2571 bytes.
dmidecode: Table at 0x000F0000.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 24 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Phoenix Technologies, LTD
dmidecode: Version: 3.12
dmidecode: Release Date: 01/12/2006
dmidecode: Address: 0xE0000
dmidecode: Runtime Size: 128 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: ISA is supported
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: BIOS ROM is socketed
dmidecode: EDD is supported
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: LS-120 boot is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode: BIOS boot specification is supported
dmidecode: Function key-initiated network boot is supported
dmidecode: Targeted content distribution is supported
dmidecode: BIOS Revision: 3.12
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 27 bytes
dmidecode: System Information
dmidecode: Manufacturer: HP Pavilion 061
dmidecode: Product Name: PX181AV-ABA d4100y
dmidecode: Version: 03l1211CT101LITHI00
dmidecode: Serial Number: MXG6090253 NA610
dmidecode: UUID: 00E5C229-4217-1110-BC26-B45B06A6559C
dmidecode: Wake-up Type: Power Switch
dmidecode: SKU Number:
dmidecode: Family:
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: ASUSTek Computer INC.
dmidecode: Product Name: LITHIUM
dmidecode: Version: 1.04
dmidecode: Serial Number: MB-1234567890
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer:
dmidecode: Type: Desktop
dmidecode: Lock: Not Present
dmidecode: Version: 1111
dmidecode: Serial Number:
dmidecode: Asset Tag:
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Safe
dmidecode: Security Status: None
dmidecode: OEM Information: 0x00000000
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Socket 775
dmidecode: Type: Central Processor
dmidecode: Family: Other
dmidecode: Manufacturer: Intel
dmidecode: ID: 62 0F 00 00 FF FB EB BF
dmidecode: Version: Intel(R) Pentium(R) D CPU 2.80GHz
dmidecode: Voltage: 1.2 V
dmidecode: External Clock: 200 MHz
dmidecode: Max Speed: 3800 MHz
dmidecode: Current Speed: 2800 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: ZIF Socket
dmidecode: L1 Cache Handle: 0x000A
dmidecode: L2 Cache Handle: 0x000B
dmidecode: L3 Cache Handle: 0x000C
dmidecode: Serial Number:
dmidecode: Asset Tag:
dmidecode: Part Number:
dmidecode:
dmidecode: Handle 0x0005, DMI type 5, 24 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: 8-bit Parity
dmidecode: Error Correcting Capabilities:
dmidecode: None
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 1024 MB
dmidecode: Maximum Total Memory Size: 4096 MB
dmidecode: Supported Speeds:
dmidecode: Other
dmidecode: Supported Memory Types:
dmidecode: Other
dmidecode: Memory Module Voltage: 5.0 V
dmidecode: Associated Memory Slots: 4
dmidecode: 0x0006
dmidecode: 0x0007
dmidecode: 0x0008
dmidecode: 0x0009
dmidecode: Enabled Error Correcting Capabilities:
dmidecode: None
dmidecode:
dmidecode: Handle 0x0006, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: A0
dmidecode: Bank Connections: 0
dmidecode: Current Speed: Unknown
dmidecode: Type: Other
dmidecode: Installed Size: 512 MB (Single-bank Connection)
dmidecode: Enabled Size: 512 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0007, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: A1
dmidecode: Bank Connections: None
dmidecode: Current Speed: Unknown
dmidecode: Type: Unknown
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: A2
dmidecode: Bank Connections: 4
dmidecode: Current Speed: Unknown
dmidecode: Type: Other
dmidecode: Installed Size: 512 MB (Single-bank Connection)
dmidecode: Enabled Size: 512 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: A3
dmidecode: Bank Connections: None
dmidecode: Current Speed: Unknown
dmidecode: Type: Unknown
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000A, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 16 KB
dmidecode: Maximum Size: 16 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Data
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x000B, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 2048 KB
dmidecode: Maximum Size: 2048 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x000C, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L3 Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 3
dmidecode: Operational Mode: Varies With Memory Address
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 0 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PRIMARY IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: FDD
dmidecode: Internal Connector Type: On Board Floppy
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: 8251 FIFO Compatible
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LPT1
dmidecode: Internal Connector Type: DB-25 female
dmidecode: External Reference Designator:
dmidecode: External Connector Type: DB-25 female
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PS/2 Keyboard
dmidecode: Internal Connector Type: PS/2
dmidecode: External Reference Designator:
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PS/2 Mouse
dmidecode: Internal Connector Type: PS/2
dmidecode: External Reference Designator:
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB1
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB2
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB3
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB4
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB5
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB6
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB7
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB8
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: VIDEO
dmidecode: External Connector Type: DB-15 female
dmidecode: Port Type: Video Port
dmidecode:
dmidecode: Handle 0x001B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Line In
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Back Surround L/R
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Back Surround L/R
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Side Surround L/R
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Side Surround L/R
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Center/LFE
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Center/LFE
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: ETHERNET
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x0020, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0021, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0022, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI3
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: In Use
dmidecode: Length: Short
dmidecode: ID: 3
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0023, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI4
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 4
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0024, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI5
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 5
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0025, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIEX16
dmidecode: Type: x16 PCI Express
dmidecode: Current Usage: In Use
dmidecode: Length: Short
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0026, DMI type 10, 12 bytes
dmidecode: On Board Device 1 Information
dmidecode: Type: Other
dmidecode: Status: Enabled
dmidecode: Description:
dmidecode: On Board Device 2 Information
dmidecode: Type: Video
dmidecode: Status: Disabled
dmidecode: Description:
dmidecode: On Board Device 3 Information
dmidecode: Type: Ethernet
dmidecode: Status: Enabled
dmidecode: Description:
dmidecode: On Board Device 4 Information
dmidecode: Type: Sound
dmidecode: Status: Enabled
dmidecode: Description:
dmidecode:
dmidecode: Handle 0x0027, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 3
dmidecode: n|US|iso8859-1
dmidecode: n|US|iso8859-1
dmidecode: r|CA|iso8859-1
dmidecode: Currently Installed Language: n|US|iso8859-1
dmidecode:
dmidecode: Handle 0x0028, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 4 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x0029, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0028
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: A0
dmidecode: Bank Locator: Bank0/1
dmidecode: Type: DDR2
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 533 MHz (1.9 ns)
dmidecode: Manufacturer: None
dmidecode: Serial Number: None
dmidecode: Asset Tag: None
dmidecode: Part Number: None
dmidecode:
dmidecode: Handle 0x002A, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0028
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: A1
dmidecode: Bank Locator: Bank2/3
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: None
dmidecode: Serial Number: None
dmidecode: Asset Tag: None
dmidecode: Part Number: None
dmidecode:
dmidecode: Handle 0x002B, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0028
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: A2
dmidecode: Bank Locator: Bank4/5
dmidecode: Type: DDR2
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 533 MHz (1.9 ns)
dmidecode: Manufacturer: None
dmidecode: Serial Number: None
dmidecode: Asset Tag: None
dmidecode: Part Number: None
dmidecode:
dmidecode: Handle 0x002C, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0028
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: A3
dmidecode: Bank Locator: Bank6/7
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: None
dmidecode: Serial Number: None
dmidecode: Asset Tag: None
dmidecode: Part Number: None
dmidecode:
dmidecode: Handle 0x002D, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Array Handle: 0x0028
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x002E, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x0029
dmidecode: Memory Array Mapped Address Handle: 0x002D
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x002F, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x002A
dmidecode: Memory Array Mapped Address Handle: 0x002D
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0030, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00020000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x002B
dmidecode: Memory Array Mapped Address Handle: 0x002D
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0031, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x002C
dmidecode: Memory Array Mapped Address Handle: 0x002D
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0032, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x0033, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: bid=61NAhcBLU4,61NAhcBLU1;OEMAuditBootLink=\\10.10.5.8\OEMAuditB
dmidecode: String 2: ootLink\CTO.cmd;C_SEU;SFCHK;KBDRV;WD_SE;SDMED_DLX;MDVD_STD;SBKUP
dmidecode: String 3: ;QUIF_NUE;PROD_MSOFFSBE;RP_STD;IS.N24m;MSC-1-9-15;##
dmidecode: String 4:
dmidecode: String 5:
dmidecode: String 6:
dmidecode: String 7:
dmidecode: String 8:
dmidecode: String 9:
dmidecode: String 10:
dmidecode: String 11:
dmidecode: String 12:
dmidecode: String 13:
dmidecode: String 14:
dmidecode: String 15:
dmidecode: String 16:
dmidecode:
dmidecode: Handle 0x0034, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok installed
Version: 1.24
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.33
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: firmware-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: firmware-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: Firmware request modules
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-10
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.09
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.23
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.16
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.43
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: ide-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: ide-modules
Depends: kernel-image-2.6.18-3-amd64-di, ide-core-modules-2.6.18-3-amd64-di
Description: IDE drivers
Package: di-utils
Status: install ok installed
Version: 1.43
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: sata-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: sata-modules
Depends: kernel-image-2.6.18-3-amd64-di, scsi-core-modules-2.6.18-3-amd64-di
Description: SATA drivers
Package: scsi-core-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: Core SCSI subsystem
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.112
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: floppy-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: floppy-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: Floppy driver
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-1
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.49
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.103-2
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: scsi-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: scsi-modules
Depends: kernel-image-2.6.18-3-amd64-di, scsi-core-modules-2.6.18-3-amd64-di, scsi-common-modules-2.6.18-3-amd64-di, parport-modules-2.6.18-3-amd64-di, cdrom-core-modules-2.6.18-3-amd64-di, firmware-modules-2.6.18-3-amd64-di
Description: SCSI drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-6
Depends: libc6 (>= 2.3.5-1)
Description: Access software for a blind person using a soft braille terminal
Package: usb-serial-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-3-amd64-di, usb-modules-2.6.18-3-amd64-di
Description: USB serial drivers
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: pcmcia-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-3-amd64-di, firmware-modules-2.6.18-3-amd64-di
Description: Common PCMCIA drivers
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb
Package: parport-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: parport-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: Parallel port support
Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.112
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: ide-core-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: ide-core-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: IDE support
Package: usb-storage-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-3-amd64-di, scsi-core-modules-2.6.18-3-amd64-di, usb-modules-2.6.18-3-amd64-di
Description: USB storage support
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: kernel-image-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: load-cdrom
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: scsi-common-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-3-amd64-di, scsi-core-modules-2.6.18-3-amd64-di, cdrom-core-modules-2.6.18-3-amd64-di
Description: Very common SCSI drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.112
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
Package: acpi-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: acpi-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: ACPI support modules
Package: cdrom-core-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-3-amd64-di, scsi-core-modules-2.6.18-3-amd64-di, ide-modules-2.6.18-3-amd64-di
Description: CDROM support
Package: fb-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: fb-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: Frame buffer support
Package: input-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: input-modules
Depends: kernel-image-2.6.18-3-amd64-di, usb-modules-2.6.18-3-amd64-di
Description: Input devices support
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: serial-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: serial-modules
Depends: kernel-image-2.6.18-3-amd64-di, pcmcia-modules-2.6.18-3-amd64-di
Description: Serial drivers
Package: usb-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: usb-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: USB support
Package: floppy-retriever
Status: install ok unpacked
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.47
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.24
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: firewire-core-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-3-amd64-di, kernel-image-2.6.18-3-amd64-di
Description: Core FireWire drivers
Package: archdetect
Status: install ok installed
Version: 1.47
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.27
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.43
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.5-1)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4-1
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-6
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.43
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.47
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.47
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.24
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.9
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.112
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.32
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.24
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: pcmcia-storage-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-3-amd64-di, ide-core-modules-2.6.18-3-amd64-di, cdrom-core-modules-2.6.18-3-amd64-di, pcmcia-modules-2.6.18-3-amd64-di
Description: PCMCIA storage drivers
Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: fat-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: fat-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: FAT filesystem support
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.112
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: cdrom-detect
Status: install ok installed
Version: 1.18
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20070115-10:53
Description: debian installation image
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.71
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 12
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.11
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.11
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 224
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.1
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 160
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.43
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.47
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 76
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-4
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ext3-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 368
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 168
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-15
Depends: libc6 (>= 2.3.5-1)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.7
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1004
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 48
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2132
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-10
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.12-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 352
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 472
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 592
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 184
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-8
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.24
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 3480
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di, nic-shared-modules-2.6.18-3-amd64-di, firmware-modules-2.6.18-3-amd64-di, crc-modules-2.6.18-3-amd64-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 620
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di, nic-shared-modules-2.6.18-3-amd64-di, firmware-modules-2.6.18-3-amd64-di, firewire-core-modules-2.6.18-3-amd64-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 788
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di, nic-shared-modules-2.6.18-3-amd64-di, nic-extra-modules-2.6.18-3-amd64-di, pcmcia-modules-2.6.18-3-amd64-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 296
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di, nic-shared-modules-2.6.18-3-amd64-di, usb-modules-2.6.18-3-amd64-di, firmware-modules-2.6.18-3-amd64-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6
Depends: libc6 (>= 2.3.5-1)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 76
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 392
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 64
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 888
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 102
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 50
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 880
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 19
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 352
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1924
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: scsi-modules-2.6.18-3-amd64-di, scsi-core-modules-2.6.18-3-amd64-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 300
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.14
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.8
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 696
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 272
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.18-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 56
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities
ii reportbug 3.31 reports bugs in the Debian distrib
-- no debconf information
I installed from cdrom with the DHCP server providing the following
preseed.cfg file.
#### Contents of the preconfiguration file
### Localization
# Locale sets language and country.
d-i debian-installer/locale string en_US.UTF-8
# Keyboard selection.
d-i console-keymaps-at/keymap select us
### Network configuration
# netcfg will choose an interface that has link if possible. This makes it
# skip displaying a list if there is more than one interface.
d-i netcfg/choose_interface select auto
# Any hostname and domain names assigned from dhcp take precedence over
# values set here. However, setting the values still prevents the questions
# from being shown, even if values come from dhcp.
d-i netcfg/get_hostname string unassigned-hostname
d-i netcfg/get_domain string unassigned-domain
### Mirror settings
d-i mirror/country string enter information manually
d-i mirror/http/hostname string despair.proulx.com
d-i mirror/http/directory string /apt-cacher/http.us.debian.org/debian
d-i mirror/http/proxy string
# Suite to install.
d-i mirror/suite string testing
### Clock and time zone setup
# Controls whether or not the hardware clock is set to UTC.
d-i clock-setup/utc boolean true
# You may set this to any valid setting for $TZ; see the contents of
# /usr/share/zoneinfo/ for valid values.
d-i time/zone string US/Mountain
### Apt setup
# You can choose to install non-free and contrib software.
d-i apt-setup/non-free boolean true
# Uncomment this to avoid adding security sources, or
# add a hostname to use a different server than security.debian.org.
d-i apt-setup/security_host string
#d-i apt-setup/security_host string despair.proulx.com/apt-cacher/security.debian.org
# Additional repositories, local[0-9] available
#d-i apt-setup/local0/repository string deb http://despair.proulx.com/apt-cacher/security.debian.org etch/updates main contrib non-free
#d-i apt-setup/local0/comment string local server
# Enable deb-src lines
#d-i apt-setup/local0/source boolean true
# URL to the public key of the local repository; you must provide a key or
# apt will complain about the unauthenticated repository and so the
# sources.list line will be left commented out
#d-i apt-setup/local0/key string http://local.server/key
### Account setup
# Skip creation of a root account (normal user account will be able to
# use sudo).
#d-i passwd/root-login boolean false
# Alternatively, to skip creation of a normal user account.
#d-i passwd/make-user boolean false
# Root password, either in clear text
#d-i passwd/root-password password r00tme
#d-i passwd/root-password-again password r00tme
# or encrypted using an MD5 hash.
#d-i passwd/root-password-crypted password [MD5 hash]
d-i passwd/root-password-crypted password [hash contents deleted]
# To create a normal user account.
#d-i passwd/user-fullname string Debian User
#d-i passwd/username string debian
# Normal user's password, either in clear text
#d-i passwd/user-password password insecure
#d-i passwd/user-password-again password insecure
# or encrypted using an MD5 hash.
#d-i passwd/user-password-crypted password [MD5 hash]
d-i passwd/user-fullname string Bob Proulx
d-i passwd/username string bob
d-i passwd/user-password-crypted password [hash contents deleted]
### Base system installation
# Select the initramfs generator used to generate the initrd for 2.6 kernels.
d-i base-installer/initramfs/generator select initramfs-tools
# Some versions of the installer can report back on what software you have
# installed, and what software you use. The default is not to report back,
# but sending reports helps the project determine what software is most
# popular and include it on CDs.
popularity-contest popularity-contest/participate boolean true
### Finishing up the first stage install
# Avoid that last message about the install being complete.
d-i finish-install/reboot_in_progress note
--- End Message ---